89 lines
2.3 KiB
Diff
89 lines
2.3 KiB
Diff
From a00542ec9867d2594171e041e51bc8fb5badc88c Mon Sep 17 00:00:00 2001
|
|
From: Igor Pecovnik <igor.pecovnik@gmail.com>
|
|
Date: Sun, 16 May 2021 23:11:05 +0200
|
|
Subject: [PATCH] add cpu's thermal config for
|
|
|
|
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
|
|
---
|
|
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 64 ++++++++++++++++++++++++
|
|
1 file changed, 64 insertions(+)
|
|
|
|
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
|
|
index fa0506726..2baf26485 100644
|
|
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
|
|
@@ -526,6 +526,70 @@ saradc: saradc@ff1e0000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
+ thermal_zones: thermal-zones {
|
|
+
|
|
+ soc_thermal: soc-thermal {
|
|
+ polling-delay-passive = <20>;
|
|
+ polling-delay = <1000>;
|
|
+ sustainable-power = <300>;
|
|
+
|
|
+ thermal-sensors = <&tsadc 1>;
|
|
+
|
|
+ trips {
|
|
+ threshold: trip-point-0 {
|
|
+ temperature = <70000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ target: trip-point-1 {
|
|
+ temperature = <85000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "passive";
|
|
+ };
|
|
+ soc_crit: soc-crit {
|
|
+ temperature = <115000>;
|
|
+ hysteresis = <2000>;
|
|
+ type = "critical";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ cooling-maps {
|
|
+ map0 {
|
|
+ trip = <&target>;
|
|
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
+ contribution = <4096>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ };
|
|
+
|
|
+ logic_thermal: logic-thermal {
|
|
+ polling-delay-passive = <100>; /* milliseconds */
|
|
+ polling-delay = <1000>; /* milliseconds */
|
|
+
|
|
+ thermal-sensors = <&tsadc 0>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ tsadc: tsadc@ff1f0000 {
|
|
+ compatible = "rockchip,rk3308-tsadc";
|
|
+ reg = <0x0 0xff1f0000 0x0 0x100>;
|
|
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ rockchip,grf = <&grf>;
|
|
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
|
|
+ clock-names = "tsadc", "apb_pclk";
|
|
+ assigned-clocks = <&cru SCLK_TSADC>;
|
|
+ assigned-clock-rates = <50000>;
|
|
+ resets = <&cru SRST_TSADC>;
|
|
+ reset-names = "tsadc-apb";
|
|
+ pinctrl-names = "gpio", "otpout";
|
|
+ pinctrl-0 = <&tsadc_otp_pin>;
|
|
+ pinctrl-1 = <&tsadc_otp_out>;
|
|
+ #thermal-sensor-cells = <1>;
|
|
+ rockchip,hw-tshut-temp = <120000>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
dmac0: dma-controller@ff2c0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x0 0xff2c0000 0x0 0x4000>;
|
|
--
|
|
Created with Armbian build tools https://github.com/armbian/build
|
|
|