187 lines
5.0 KiB
Diff
187 lines
5.0 KiB
Diff
From 6381e7b223548747721afc231722bc94d36ba78e Mon Sep 17 00:00:00 2001
|
|
From: Ondrej Jirman <megous@megous.com>
|
|
Date: Sun, 23 Feb 2020 01:23:10 +0100
|
|
Subject: [PATCH 089/351] ARM: dts: sun5i: Add PocketBook Touch Lux 3
|
|
display/ctp support
|
|
|
|
Add support for display and touchscreen via out-of-tree drivers.
|
|
|
|
Signed-off-by: Ondrej Jirman <megous@megous.com>
|
|
---
|
|
.../dts/sun5i-a13-pocketbook-touch-lux-3.dts | 105 +++++++++++++++++-
|
|
1 file changed, 103 insertions(+), 2 deletions(-)
|
|
|
|
diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
|
|
index e9ef97c9c893..154af1391fd0 100644
|
|
--- a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
|
|
+++ b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
|
|
@@ -61,6 +61,11 @@ key-left {
|
|
};
|
|
};
|
|
|
|
+ regulator-eink {
|
|
+ compatible = "custom,reg-userspace-consumer";
|
|
+ controlled-supply = <&tp65185x>;
|
|
+ };
|
|
+
|
|
reg_1v8: regulator-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd-1v8-nor-ctp";
|
|
@@ -78,7 +83,6 @@ reg_1v8_nor: regulator-nor {
|
|
gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <®_1v8>;
|
|
- regulator-always-on;
|
|
};
|
|
|
|
reg_1v8_ctp: regulator-ctp {
|
|
@@ -111,6 +115,7 @@ &ehci0 {
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
+ //XXX: bsp has pullup on PB0/PB1 pins enabled, but it works without it
|
|
|
|
axp209: pmic@34 {
|
|
reg = <0x34>;
|
|
@@ -127,12 +132,42 @@ pcf8563: rtc@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
};
|
|
+
|
|
+ // hacky PMIC driver for eInk display
|
|
+ tp65185x: regulator@68 {
|
|
+ compatible = "tp,tp65185x";
|
|
+ reg = <0x68>;
|
|
+
|
|
+ regulator-min-microvolt = <3120000>;
|
|
+ regulator-max-microvolt = <3120000>;
|
|
+ regulator-name = "eink-vcom";
|
|
+
|
|
+ //XXX: we don't use interrupts in the driver right now
|
|
+ //interrupt-parent = <&pio>;
|
|
+ //interrupts = <1 10 IRQ_TYPE_LEVEL_LOW>; /* PB10 */
|
|
+
|
|
+ wakeup-gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
|
|
+ powerup-gpios = <&pio 4 7 GPIO_ACTIVE_HIGH>; /* PE7 */
|
|
+ vcom-gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
|
|
+ //XXX: not a pullup on BSP (might have an external resistor)
|
|
+ powergood-gpios = <&pio 4 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PE6 */
|
|
+ };
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
- /* Touchpanel is connected here. */
|
|
+ touchpanel@24 {
|
|
+ compatible = "cypress,cyttsp4_i2c_adapter";
|
|
+ reg = <0x24>;
|
|
+
|
|
+ interrupt-parent = <&pio>;
|
|
+ interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* PG11 */
|
|
+
|
|
+ vdd-supply = <®_1v8_ctp>;
|
|
+ power-gpios = <&pio 4 5 GPIO_ACTIVE_LOW>; /* PE5 */
|
|
+ reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
|
|
+ };
|
|
};
|
|
|
|
&lradc {
|
|
@@ -178,6 +213,20 @@ &otg_sram {
|
|
status = "okay";
|
|
};
|
|
|
|
+&pio {
|
|
+ eink_pins_active: eink-pins-lcd {
|
|
+ pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12",
|
|
+ "PD13", "PD15", "PD20", "PD21", "PD22", "PD23", "PD24";
|
|
+ function = "lcd0";
|
|
+ };
|
|
+
|
|
+ eink_pins_idle: eink-pins-gpio {
|
|
+ pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12",
|
|
+ "PD13", "PD15", "PD20", "PD21", "PD22", "PD23", "PD24";
|
|
+ function = "gpio_out";
|
|
+ };
|
|
+};
|
|
+
|
|
&pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm0_pin>;
|
|
@@ -218,6 +267,55 @@ ®_ldo3 {
|
|
regulator-ramp-delay = <1600>;
|
|
};
|
|
|
|
+&soc {
|
|
+ display-controller@1c0c000 {
|
|
+ pinctrl-names = "idle", "active";
|
|
+ pinctrl-0 = <&eink_pins_idle>;
|
|
+ pinctrl-1 = <&eink_pins_active>;
|
|
+
|
|
+ all-gpios = <&pio 3 3 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 4 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 5 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 6 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 7 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 10 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 11 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 12 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 13 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 15 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 20 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 21 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 22 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 23 GPIO_ACTIVE_HIGH>,
|
|
+ <&pio 3 24 GPIO_ACTIVE_HIGH>;
|
|
+
|
|
+ compatible = "custom,pocketbook-touch-lux-3-tcon0-ed060xd4-display";
|
|
+ reg = <0x01c0c000 0x1000>, // TCON0 regs
|
|
+ <0x01e60000 0x10000>; // DEBE regs
|
|
+
|
|
+ interrupts = <44>; // TCON interrupt
|
|
+
|
|
+ resets = <&ccu RST_LCD>, <&ccu RST_DE_BE>;
|
|
+ reset-names = "tcon", "be";
|
|
+
|
|
+ clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_TCON_CH0>,
|
|
+ <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
|
|
+ <&ccu CLK_DRAM_DE_BE>;
|
|
+ clock-names = "tcon_bus", "tcon_mod",
|
|
+ "be_bus", "be_mod",
|
|
+ "be_ram";
|
|
+
|
|
+ assigned-clocks = <&ccu CLK_DE_BE>;
|
|
+ assigned-clock-rates = <300000000>;
|
|
+
|
|
+ interconnects = <&mbus 18>;
|
|
+ interconnect-names = "dma-mem";
|
|
+
|
|
+ panel-supply = <&tp65185x>;
|
|
+ control-device-name = "eink-panel";
|
|
+ };
|
|
+};
|
|
+
|
|
&spi2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
|
|
@@ -229,6 +327,7 @@ epd_flash: flash@0 {
|
|
compatible = "macronix,mx25u4033", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <4000000>;
|
|
+ vdd-supply = <®_1v8_nor>;
|
|
};
|
|
};
|
|
|
|
@@ -252,6 +351,8 @@ &usb_power_supply {
|
|
};
|
|
|
|
&usbphy {
|
|
+ //XXX: might not work, need to test
|
|
+ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
|
|
usb1_vbus-supply = <®_ldo3>;
|
|
status = "okay";
|
|
};
|
|
--
|
|
2.34.0
|
|
|