build/patch/kernel/archive/sunxi-6.1/patches.armbian/arm-dts-h3-nanopi-neo-air-Add-regulator-camera-wifi-bluetooth-o.patch

198 lines
4.3 KiB
Diff

From 63a18523fa56c34ff3db31710856ed749a6c195b Mon Sep 17 00:00:00 2001
From: The-going <48602507+The-going@users.noreply.github.com>
Date: Mon, 24 Jan 2022 15:45:43 +0300
Subject: [PATCH 075/170] arm:dts: h3-nanopi-neo-air Add regulator camera wifi
bluetooth otg
---
arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 153 ++++++++++++++++++
1 file changed, 153 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
index cd3df12b6..363683cd3 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -70,12 +70,92 @@ led-0 {
led-1 {
label = "nanopi:blue:status";
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+ linux,default-trigger = "heartbeat";
};
};
+ vdd_cpux: gpio-regulator {
+ compatible = "regulator-gpio";
+ pinctrl-names = "default";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ gpios-states = <0x1>;
+ states = <1100000 0x0
+ 1300000 0x1>;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_en_npi>;
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ post-power-on-delay-ms = <200>;
+ };
+
+ rfkill_bt {
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pwr_pin>;
+ reset-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ clocks = <&osc32k>;
+ clock-frequency = <32768>;
+ rfkill-name = "sunxi-bt";
+ rfkill-type = "bluetooth";
+ };
+
+ cam_xclk: cam-xclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "cam-xclk";
+ };
+
+ reg_cam_avdd: cam-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "cam500b-avdd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <&reg_vcc3v3>;
+ };
+
+ reg_cam_dovdd: cam-dovdd {
+ compatible = "regulator-fixed";
+ regulator-name = "cam500b-dovdd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&reg_vcc3v3>;
+ };
+
+ reg_cam_dvdd: cam-dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "cam500b-dvdd";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <&reg_vcc3v3>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpux>;
+};
+
+&pio {
+ bt_pwr_pin: bt_pwr_pin@0 {
+ pins = "PG13";
+ function = "gpio_out";
+ };
+};
+
+&r_pio {
+ wifi_en_npi: wifi_en_pin {
+ pins = "PL7";
+ function = "gpio_out";
};
};
@@ -110,6 +190,74 @@ &mmc2 {
vqmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&mmc2_8bit_pins {
+ /* Increase drive strength for DDR modes */
+ drive-strength = <40>;
+ /* eMMC is missing pull-ups */
+ bias-pull-up;
+};
+
+&csi {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Parallel bus endpoint */
+ csi_from_ov5640: endpoint {
+ remote-endpoint = <&ov5640_to_csi>;
+ bus-width = <8>;
+ data-shift = <2>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&cam_xclk>;
+ clock-names = "xclk";
+
+ reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>;
+ AVDD-supply = <&reg_cam_avdd>;
+ DOVDD-supply = <&reg_cam_dovdd>;
+ DVDD-supply = <&reg_cam_dvdd>;
+
+ port {
+ ov5640_to_csi: endpoint {
+ remote-endpoint = <&csi_from_ov5640>;
+ bus-width = <8>;
+ data-shift = <2>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+};
+
+&i2c2_pins {
+ bias-pull-up;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
status = "okay";
};
@@ -137,6 +285,11 @@ bluetooth {
};
};
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
&usbphy {
/* USB VBUS is always on */
status = "okay";
--
2.35.3