build/patch/kernel/archive/sunxi-6.2/patches.armbian/Doc-dt-bindings-usb-add-binding-for-DWC3-controller-on-Allwinne.patch

65 lines
2.0 KiB
Diff

From 7b6f3bd96b2507e209847d06ece1ecdb21f9abf7 Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Mon, 25 Dec 2017 12:08:01 +0800
Subject: [PATCH 003/153] Doc:dt-bindings:usb: add binding for DWC3 controller
on Allwinner SoC
The Allwinner H6 SoC uses DWC3 controller for USB3.
Add its device tree binding document.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
.../bindings/usb/allwinner,dwc3.txt | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/allwinner,dwc3.txt
diff --git a/Documentation/devicetree/bindings/usb/allwinner,dwc3.txt b/Documentation/devicetree/bindings/usb/allwinner,dwc3.txt
new file mode 100644
index 000000000..3f7714636
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/allwinner,dwc3.txt
@@ -0,0 +1,39 @@
+Allwinner SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible: should contain "allwinner,sun50i-h6-dwc3" for H6 SoC
+- clocks: A list of phandle + clock-specifier pairs for the
+ clocks listed in clock-names
+- clock-names: Should contain the following:
+ "bus" The bus clock of the DWC3 part
+- resets: A list of phandle + reset-specifier pairs for the
+ resets listed in reset-names
+- reset-names: Should contain the following:
+ "bus" The bus reset of the DWC3 part
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Phy documentation is provided in the following places:
+Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
+
+Example device nodes:
+ usb3: usb@5200000 {
+ compatible = "allwinner,sun50i-h6-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&ccu CLK_BUS_XHCI>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_XHCI>;
+ reset-names = "bus";
+
+ dwc3: dwc3 {
+ compatible = "snps,dwc3";
+ reg = <0x5200000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3phy>;
+ phy-names = "usb3-phy";
+ };
+ };
--
2.35.3