build/patch/kernel/archive/sunxi-6.4/patches.armbian/arm-dts-sun5i-a13-olinuxino-micro-add-panel-lcd-olinuxino-4.3.patch

108 lines
2.3 KiB
Diff

From e164959b426df800902fa268d6e59b08ccf897e0 Mon Sep 17 00:00:00 2001
From: Mitko Gamishev <hehopmajieh@debian.bg>
Date: Wed, 5 Feb 2020 15:00:25 +0200
Subject: [PATCH 118/153] arm:dts:sun5i-a13-olinuxino-micro add panel
lcd-olinuxino-4.3
---
.../boot/dts/sun5i-a13-olinuxino-micro.dts | 62 ++++++++++++++++++-
1 file changed, 60 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index bfe1075e6..32874f6a5 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -44,7 +44,7 @@
/dts-v1/;
#include "sun5i-a13.dtsi"
#include "sunxi-common-regulators.dtsi"
-
+#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -70,6 +70,40 @@ led {
default-state = "on";
};
};
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <8>;
+
+ };
+
+ panel: panel {
+ compatible = "olimex,lcd-olinuxino-4.3";
+ backlight = <&backlight>;
+ enable-gpios = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&tcon0_out_lcd>;
+ };
+ };
+
+ };
+
+ };
+
+
+
+&be0 {
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
};
&ehci0 {
@@ -117,10 +151,28 @@ &reg_usb0_vbus {
};
&reg_usb1_vbus {
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ gpio = <&pio 2 19 GPIO_ACTIVE_HIGH>;
status = "okay";
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rgb666_pins>;
+ status = "okay";
+};
+&tcon0_out {
+ tcon0_out_lcd: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pg_pins>;
@@ -139,3 +191,9 @@ &usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
+
+&rtp {
+ allwinner,ts-attached;
+ touchscreen-inverted-x;
+};
+
--
2.35.3