build/patch/kernel/archive/sunxi-6.4/patches.armbian/arm64-dts-sun50i-h5-orangepi-prime-add-regulator.patch

93 lines
2.4 KiB
Diff

From 97c2daed24e3317b3dbc4f1c8fc647d42d268c85 Mon Sep 17 00:00:00 2001
From: The-going <48602507+The-going@users.noreply.github.com>
Date: Mon, 24 Jan 2022 19:34:31 +0300
Subject: [PATCH 094/153] arm64:dts: sun50i-h5-orangepi-prime add regulator
---
.../allwinner/sun50i-h5-orangepi-prime.dts | 43 ++++++++++++++++---
1 file changed, 36 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index 6e44f86a8..375572d2f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -8,11 +8,19 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi Prime";
compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
aliases {
ethernet0 = &emac;
serial0 = &uart0;
@@ -68,13 +76,6 @@ reg_gmac_3v3: gmac-3v3 {
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
reg_usb0_vbus: usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0-vbus";
@@ -91,6 +92,10 @@ wifi_pwrseq: wifi_pwrseq {
};
};
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpux>;
+};
+
&codec {
allwinner,audio-routing =
"Line Out", "LINEOUT",
@@ -189,6 +194,30 @@ &ohci3 {
&sound_hdmi {
status = "okay";
};
+&r_i2c {
+ status = "okay";
+
+ reg_vdd_cpux: regulator@65 {
+ compatible = "silergy,sy8106a";
+ reg = <0x65>;
+ regulator-name = "vdd-cpux";
+ silergy,fixed-microvolt = <1200000>;
+ /*
+ * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+ * however both the Armbian DVFS table and the official one
+ * have operating points with voltage under 1.1V, and both
+ * DVFS table are known to work properly at the lowest
+ * operating point.
+ *
+ * Use 1.0V as the minimum voltage instead.
+ */
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <200>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
&uart0 {
pinctrl-names = "default";
--
2.35.3