1420 lines
33 KiB
Diff
1420 lines
33 KiB
Diff
From 503d32c53ab96787d5489699cf263bd1bc4fa4af Mon Sep 17 00:00:00 2001
|
|
From: Ondrej Jirman <megi@xff.cz>
|
|
Date: Sat, 22 Jul 2023 00:05:17 +0200
|
|
Subject: [PATCH 462/464] arm64: dts: rk3588-quartz64pro: Add Quartz 64 Pro SBC
|
|
|
|
This is mostly based on evb + my Orange Pi 5 + DT and cross-checked
|
|
against the schematic.
|
|
|
|
Signed-off-by: Ondrej Jirman <megi@xff.cz>
|
|
---
|
|
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
.../boot/dts/rockchip/rk3588-quartzpro64.dts | 1383 +++++++++++++++++
|
|
2 files changed, 1384 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
|
|
|
|
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
|
|
index 8853332840c1..6df2d54a78b0 100644
|
|
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
@@ -99,6 +99,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
|
|
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
|
|
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
|
|
new file mode 100644
|
|
index 000000000000..1e865bffcf9b
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
|
|
@@ -0,0 +1,1383 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
|
+ *
|
|
+ */
|
|
+/*
|
|
+ * - wifi/wifi pcie does not show up
|
|
+ * - 32khz clock to wifi from rtc
|
|
+ * - type-c port may not work in both orientations
|
|
+ */
|
|
+/*
|
|
+ * * LED
|
|
+ * - Power_LED_EN_H - GPIO3_B7_d
|
|
+ * - work led
|
|
+ * * buttons
|
|
+ * - power on (both PMICs)
|
|
+ * - maskrom
|
|
+ * * debug uart2
|
|
+ * * rtc - GPIO0_D4_u (int_l)
|
|
+ * - I2C2_SCL_M0
|
|
+ * - 32KOUT_WIFI
|
|
+ * - RTC_32K_IN
|
|
+ * - addr 0xa2
|
|
+ * * emmc - gpio2_d/a
|
|
+ * - VCC_1V8_S0 io
|
|
+ * - VCC_3V3_S0 power
|
|
+ * * sd card
|
|
+ * - GPIO4_D
|
|
+ * - VCCIO_SD_S0
|
|
+ * - VCC_3V3_S3
|
|
+ * - carddet GPIO0_A4_u
|
|
+ * * saradc
|
|
+ * - 0: BOOT_SARADC_IN0 - pulled up to 1.8V, button to GND to enter maskrom
|
|
+ * - 1: adc ladder keys v+ v- menu esc
|
|
+ * - 3: microphone keys for headset
|
|
+ * - 5: evb hw id
|
|
+ * * gmac0
|
|
+ * - ETH0_REFCLKO_25M
|
|
+ * - GMAC0_RSTn_L - GPIO4_B3_u
|
|
+ * - RTL8211F-CG
|
|
+ * - VCC_3V3_S0
|
|
+ * * gmac1
|
|
+ * - RTL8111HS
|
|
+ * - PCIE30X1_1RC
|
|
+ * - pcie mux2 combo
|
|
+ * - VCC_3V3_S0
|
|
+ * * wifi
|
|
+ * - WIFI_WAKE_HOST_H - GPIO3_A7_u
|
|
+ * - not hooked
|
|
+ * - WIFI_REG_ON_H - GPIO3_B1_d
|
|
+ * - PCIe30x1_0 - 1Lane(RC)--2(1L0) - mux1
|
|
+ * - VCC_3V3_S0 = VBAT
|
|
+ * - VCC_1V8_S0 - vccio
|
|
+ * * 1x sata port (second one is unused)
|
|
+ * - combo mux0 are muxed to sata0 host
|
|
+ * - SATA30_0
|
|
+ * * 2x usb 2.0 host only ports
|
|
+ * * 1x usb 3.0 host only port
|
|
+ * - ctl1 = just usb ss / usb2_otg1
|
|
+ *
|
|
+ * * 1x typec port 1x usb30
|
|
+ * - ctl0 = alt-dp (marked as download port)
|
|
+ * - HUSB311
|
|
+ * - I2C2_SCL_M0
|
|
+ * - CC_INT_L GPIO3_B4_u
|
|
+ * - typec power supply
|
|
+ * - GPIO0_C5_u - TYPEC5V_PWREN
|
|
+ * * 1x pcie3 4x
|
|
+ * - PCIE30x4_PWREN_H - GPIO3_C3_d
|
|
+ * * codec ES8388
|
|
+ * - i2c7 m0
|
|
+ * - VCC_1V8_S0
|
|
+ * - i2s0
|
|
+ * - AVCC_1V8_CODEC_S0
|
|
+ * - VCC_3V3_S0
|
|
+ * - internal mic
|
|
+ * - jack input/output
|
|
+ * - GPIO1_D2_d PHONE_CTL
|
|
+ * - GPIO1_D5_d HP_DET_L
|
|
+ * - saradc
|
|
+ * - 2x power amps
|
|
+ * - GPIO1_D3_d SPK_CTL_H
|
|
+ * - bt
|
|
+ * - uart8 m1 + rts/cts
|
|
+ * - bt_reg_on GPIO3_A6_d
|
|
+ * - HOST_WAKE_BT_H GPIO3_A1_u
|
|
+ * - BT_WAKE_HOST_H GPIO3_A0_u
|
|
+ * - i2s2 sclk lrck sdo sdi
|
|
+ *
|
|
+ * - FAN: PWM5_M1_FAN
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/pinctrl/rockchip.h>
|
|
+#include <dt-bindings/leds/common.h>
|
|
+#include <dt-bindings/input/input.h>
|
|
+#include <dt-bindings/usb/pd.h>
|
|
+#include "rk3588.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "PINE64 Quartz Pro 64";
|
|
+ compatible = "pine64,quartzpro64", "rockchip,rk3588";
|
|
+
|
|
+ aliases {
|
|
+ mmc0 = &sdhci;
|
|
+ mmc1 = &sdmmc;
|
|
+ serial2 = &uart2;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial2:1500000n8";
|
|
+ };
|
|
+
|
|
+ adc-keys0 {
|
|
+ compatible = "adc-keys";
|
|
+ io-channels = <&saradc 0>;
|
|
+ io-channel-names = "buttons";
|
|
+ keyup-threshold-microvolt = <1800000>;
|
|
+ poll-interval = <100>;
|
|
+
|
|
+ maskrom-key {
|
|
+ linux,code = <KEY_SETUP>;
|
|
+ label = "Mask Rom";
|
|
+ press-threshold-microvolt = <393>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ adc-keys1 {
|
|
+ compatible = "adc-keys";
|
|
+ io-channels = <&saradc 1>;
|
|
+ io-channel-names = "buttons";
|
|
+ keyup-threshold-microvolt = <1800000>;
|
|
+ poll-interval = <100>;
|
|
+
|
|
+ volume-up-key {
|
|
+ linux,code = <KEY_VOLUMEUP>;
|
|
+ label = "V+/REC";
|
|
+ press-threshold-microvolt = <17821>;
|
|
+ };
|
|
+
|
|
+ volume-down-key {
|
|
+ linux,code = <KEY_VOLUMEDOWN>;
|
|
+ label = "V-";
|
|
+ press-threshold-microvolt = <415384>;
|
|
+ };
|
|
+
|
|
+ menu-key {
|
|
+ linux,code = <KEY_MENU>;
|
|
+ label = "MENU";
|
|
+ press-threshold-microvolt = <890909>;
|
|
+ };
|
|
+
|
|
+ esc-key {
|
|
+ linux,code = <KEY_ESC>;
|
|
+ label = "ESC";
|
|
+ press-threshold-microvolt = <1233962>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ speaker_amp: audio-amplifier0 {
|
|
+ compatible = "simple-audio-amplifier";
|
|
+ enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
+ sound-name-prefix = "Speaker Amp";
|
|
+ };
|
|
+
|
|
+ headphone_amp: audio-amplifier1 {
|
|
+ compatible = "simple-audio-amplifier";
|
|
+ enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
+ sound-name-prefix = "Headphones Amp";
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&led_pins>;
|
|
+
|
|
+ led-0 {
|
|
+ color = <LED_COLOR_ID_ORANGE>;
|
|
+ function = LED_FUNCTION_INDICATOR;
|
|
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ sound {
|
|
+ compatible = "simple-audio-card";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&hp_detect>;
|
|
+ simple-audio-card,name = "Analog";
|
|
+ simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
|
|
+ simple-audio-card,format = "i2s";
|
|
+ simple-audio-card,mclk-fs = <256>;
|
|
+ simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
|
+ simple-audio-card,bitclock-master = <&daicpu>;
|
|
+ simple-audio-card,frame-master = <&daicpu>;
|
|
+ /* SARADC_IN3 is used as MIC detection / key input */
|
|
+
|
|
+ simple-audio-card,widgets =
|
|
+ "Microphone", "Onboard Microphone",
|
|
+ "Microphone", "Microphone Jack",
|
|
+ "Speaker", "Speaker",
|
|
+ "Headphone", "Headphones";
|
|
+
|
|
+ simple-audio-card,routing =
|
|
+ "Headphones", "LOUT1",
|
|
+ "Headphones", "ROUT1",
|
|
+ "Speaker", "LOUT2",
|
|
+ "Speaker", "ROUT2",
|
|
+
|
|
+ "Headphones", "Headphones Amp OUTL",
|
|
+ "Headphones", "Headphones Amp OUTR",
|
|
+ "Headphones Amp INL", "LOUT1",
|
|
+ "Headphones Amp INR", "ROUT1",
|
|
+
|
|
+ "Speaker", "Speaker Amp OUTL",
|
|
+ "Speaker", "Speaker Amp OUTR",
|
|
+ "Speaker Amp INL", "LOUT2",
|
|
+ "Speaker Amp INR", "ROUT2",
|
|
+
|
|
+ /* single ended signal to LINPUT1 */
|
|
+ "LINPUT1", "Microphone Jack",
|
|
+ "RINPUT1", "Microphone Jack",
|
|
+ /* differential signal */
|
|
+ "LINPUT2", "Onboard Microphone",
|
|
+ "RINPUT2", "Onboard Microphone";
|
|
+
|
|
+ daicpu: simple-audio-card,cpu {
|
|
+ sound-dai = <&i2s0_8ch>;
|
|
+ system-clock-frequency = <12288000>;
|
|
+ };
|
|
+
|
|
+ daicodec: simple-audio-card,codec {
|
|
+ sound-dai = <&es8388>;
|
|
+ system-clock-frequency = <12288000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc12v_dcin: vcc12v-dcin-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc12v_dcin";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <12000000>;
|
|
+ regulator-max-microvolt = <12000000>;
|
|
+ };
|
|
+
|
|
+ //XXX: 4v0, but renaming it is a bit pointless/annoying
|
|
+ vcc5v0_sys: vcc5v0-sys-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc5v0_sys";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <4000000>;
|
|
+ regulator-max-microvolt = <4000000>;
|
|
+ vin-supply = <&vcc12v_dcin>;
|
|
+ };
|
|
+
|
|
+ vcc5v0_usb: vcc5v0-usb {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc5v0_usb";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ vin-supply = <&vcc12v_dcin>;
|
|
+ };
|
|
+
|
|
+ vcc5v0_host: vcc5v0-host {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc5v0_host";
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ enable-active-high;
|
|
+ gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
+ vin-supply = <&vcc5v0_usb>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&vcc5v0_host_en>;
|
|
+ };
|
|
+
|
|
+ vcc3v3_pcie30: vcc3v3-pcie30 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3_pcie30";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ enable-active-high;
|
|
+ gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
+ startup-delay-us = <5000>;
|
|
+ vin-supply = <&vcc12v_dcin>;
|
|
+ };
|
|
+
|
|
+ vcc3v3_wf: vcc3v3-wf {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3_wf";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ enable-active-high;
|
|
+ gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
+ startup-delay-us = <50000>;
|
|
+ vin-supply = <&vcc_3v3_s0>;
|
|
+ };
|
|
+
|
|
+ vcc3v3_bt: vcc3v3-bt {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3_bt";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ enable-active-high;
|
|
+ gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
+ startup-delay-us = <50000>;
|
|
+ vin-supply = <&vcc_3v3_s0>;
|
|
+ };
|
|
+
|
|
+ vbus5v0_typec: vbus5v0-typec {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vbus5v0_typec";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ enable-active-high;
|
|
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
+ vin-supply = <&vcc5v0_usb>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&typec5v_pwren>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&cpu_b0 {
|
|
+ cpu-supply = <&vdd_cpu_big0_s0>;
|
|
+ mem-supply = <&vdd_cpu_big0_mem_s0>;
|
|
+};
|
|
+
|
|
+&cpu_b1 {
|
|
+ cpu-supply = <&vdd_cpu_big0_s0>;
|
|
+ mem-supply = <&vdd_cpu_big0_mem_s0>;
|
|
+};
|
|
+
|
|
+&cpu_b2 {
|
|
+ cpu-supply = <&vdd_cpu_big1_s0>;
|
|
+ mem-supply = <&vdd_cpu_big1_mem_s0>;
|
|
+};
|
|
+
|
|
+&cpu_b3 {
|
|
+ cpu-supply = <&vdd_cpu_big1_s0>;
|
|
+ mem-supply = <&vdd_cpu_big1_mem_s0>;
|
|
+};
|
|
+
|
|
+&cpu_l0 {
|
|
+ cpu-supply = <&vdd_cpu_lit_s0>;
|
|
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
|
|
+};
|
|
+
|
|
+&cpu_l1 {
|
|
+ cpu-supply = <&vdd_cpu_lit_s0>;
|
|
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
|
|
+};
|
|
+
|
|
+&cpu_l2 {
|
|
+ cpu-supply = <&vdd_cpu_lit_s0>;
|
|
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
|
|
+};
|
|
+
|
|
+&cpu_l3 {
|
|
+ cpu-supply = <&vdd_cpu_lit_s0>;
|
|
+ mem-supply = <&vdd_cpu_lit_mem_s0>;
|
|
+};
|
|
+
|
|
+&u2phy2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&u2phy3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&u2phy2_host {
|
|
+ phy-supply = <&vcc5v0_host>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&u2phy3_host {
|
|
+ phy-supply = <&vcc5v0_host>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ehci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ohci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host1_ehci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host1_ohci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&gmac0 {
|
|
+ clock_in_out = "output";
|
|
+ phy-handle = <&rgmii_phy>;
|
|
+ phy-mode = "rgmii-rxid";
|
|
+ pinctrl-0 = <&gmac0_miim
|
|
+ &gmac0_tx_bus2
|
|
+ &gmac0_rx_bus2
|
|
+ &gmac0_rgmii_clk
|
|
+ &gmac0_rgmii_bus>;
|
|
+ pinctrl-names = "default";
|
|
+ /* XXX: delays? */
|
|
+ rx_delay = <0x00>;
|
|
+ tx_delay = <0x43>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&i2c2 {
|
|
+ status = "okay";
|
|
+
|
|
+ hym8563: rtc@51 {
|
|
+ compatible = "haoyu,hym8563";
|
|
+ reg = <0x51>;
|
|
+ #clock-cells = <0>;
|
|
+ clock-output-names = "hym8563";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&hym8563_int>;
|
|
+ interrupt-parent = <&gpio0>;
|
|
+ interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
|
|
+ wakeup-source;
|
|
+ };
|
|
+};
|
|
+
|
|
+&mdio0 {
|
|
+ rgmii_phy: ethernet-phy@1 {
|
|
+ /* RTL8211F */
|
|
+ compatible = "ethernet-phy-id001c.c916";
|
|
+ reg = <0x1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&rtl8211f_rst>;
|
|
+ reset-assert-us = <20000>;
|
|
+ reset-deassert-us = <100000>;
|
|
+ reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ leds {
|
|
+ led_pins: led-pins {
|
|
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ rtl8111 {
|
|
+ rtl8111_isolate: rtl8111-isolate {
|
|
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ sound {
|
|
+ hp_detect: hp-detect {
|
|
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ usb {
|
|
+ vcc5v0_host_en: vcc5v0-host-en {
|
|
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ usb-typec {
|
|
+ usbc0_int: usbc0-int {
|
|
+ rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+
|
|
+ typec5v_pwren: typec5v-pwren {
|
|
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ rtl8211f {
|
|
+ rtl8211f_rst: rtl8211f-rst {
|
|
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+
|
|
+ };
|
|
+
|
|
+ hym8563 {
|
|
+ hym8563_int: hym8563-int {
|
|
+ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&sdhci {
|
|
+ bus-width = <8>;
|
|
+ no-sdio;
|
|
+ no-sd;
|
|
+ non-removable;
|
|
+ max-frequency = <150000000>;
|
|
+ mmc-hs400-1_8v;
|
|
+ mmc-hs400-enhanced-strobe;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sdmmc {
|
|
+ bus-width = <4>;
|
|
+ cap-sd-highspeed;
|
|
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
+ disable-wp;
|
|
+ max-frequency = <150000000>;
|
|
+ no-sdio;
|
|
+ no-mmc;
|
|
+ sd-uhs-sdr104;
|
|
+ vmmc-supply = <&vcc_3v3_s3>;
|
|
+ vqmmc-supply = <&vccio_sd_s0>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&spi2 {
|
|
+ status = "okay";
|
|
+ assigned-clocks = <&cru CLK_SPI2>;
|
|
+ assigned-clock-rates = <200000000>;
|
|
+ num-cs = <2>;
|
|
+
|
|
+ pmic@0 {
|
|
+ compatible = "rockchip,rk806";
|
|
+ reg = <0x0>;
|
|
+ #gpio-cells = <2>;
|
|
+ gpio-controller;
|
|
+ interrupt-parent = <&gpio0>;
|
|
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
|
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
|
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
|
+ pinctrl-names = "default";
|
|
+ spi-max-frequency = <1000000>;
|
|
+
|
|
+ rockchip,system-power-controller;
|
|
+
|
|
+ vcc1-supply = <&vcc5v0_sys>;
|
|
+ vcc2-supply = <&vcc5v0_sys>;
|
|
+ vcc3-supply = <&vcc5v0_sys>;
|
|
+ vcc4-supply = <&vcc5v0_sys>;
|
|
+ vcc5-supply = <&vcc5v0_sys>;
|
|
+ vcc6-supply = <&vcc5v0_sys>;
|
|
+ vcc7-supply = <&vcc5v0_sys>;
|
|
+ vcc8-supply = <&vcc5v0_sys>;
|
|
+ vcc9-supply = <&vcc5v0_sys>;
|
|
+ vcc10-supply = <&vcc5v0_sys>;
|
|
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
|
|
+ vcc12-supply = <&vcc5v0_sys>;
|
|
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
|
|
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
|
|
+ vcca-supply = <&vcc5v0_sys>;
|
|
+
|
|
+ rk806_dvs1_null: dvs1-null-pins {
|
|
+ pins = "gpio_pwrctrl1";
|
|
+ function = "pin_fun0";
|
|
+ };
|
|
+
|
|
+ rk806_dvs2_null: dvs2-null-pins {
|
|
+ pins = "gpio_pwrctrl2";
|
|
+ function = "pin_fun0";
|
|
+ };
|
|
+
|
|
+ rk806_dvs3_null: dvs3-null-pins {
|
|
+ pins = "gpio_pwrctrl3";
|
|
+ function = "pin_fun0";
|
|
+ };
|
|
+
|
|
+ regulators {
|
|
+ vdd_gpu_s0: dcdc-reg1 {
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <550000>;
|
|
+ regulator-max-microvolt = <950000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_gpu_s0";
|
|
+ regulator-enable-ramp-delay = <400>;
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_npu_s0: dcdc-reg2 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <550000>;
|
|
+ regulator-max-microvolt = <950000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_npu_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_log_s0: dcdc-reg3 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <675000>;
|
|
+ regulator-max-microvolt = <750000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_log_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ regulator-suspend-microvolt = <750000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_vdenc_s0: dcdc-reg4 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <550000>;
|
|
+ regulator-max-microvolt = <950000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_vdenc_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+
|
|
+ };
|
|
+
|
|
+ vdd_gpu_mem_s0: dcdc-reg5 {
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <675000>;
|
|
+ regulator-max-microvolt = <950000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-enable-ramp-delay = <400>;
|
|
+ regulator-name = "vdd_gpu_mem_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+
|
|
+ };
|
|
+
|
|
+ vdd_npu_mem_s0: dcdc-reg6 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <675000>;
|
|
+ regulator-max-microvolt = <950000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_npu_mem_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+
|
|
+ };
|
|
+
|
|
+ vcc_2v0_pldo_s3: dcdc-reg7 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <2000000>;
|
|
+ regulator-max-microvolt = <2000000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_2v0_pldo_s3";
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <2000000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_vdenc_mem_s0: dcdc-reg8 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <675000>;
|
|
+ regulator-max-microvolt = <950000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_vdenc_mem_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd2_ddr_s3: dcdc-reg9 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-name = "vdd2_ddr_s3";
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_1v1_nldo_s3: dcdc-reg10 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1100000>;
|
|
+ regulator-max-microvolt = <1100000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vcc_1v1_nldo_s3";
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1100000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ avcc_1v8_s0: pldo-reg1 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "avcc_1v8_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd1_1v8_ddr_s3: pldo-reg2 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd1_1v8_ddr_s3";
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ avcc_1v8_codec_s0: pldo-reg3 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "avcc_1v8_codec_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_3v3_s3: pldo-reg4 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vcc_3v3_s3";
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vccio_sd_s0: pldo-reg5 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vccio_sd_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_1v8_s3: pldo-reg6 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vcc_1v8_s3";
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_0v75_s3: nldo-reg1 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <750000>;
|
|
+ regulator-max-microvolt = <750000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_0v75_s3";
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <750000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* reserved for LPDDR5, unused? */
|
|
+ vdd2l_0v9_ddr_s3: nldo-reg2 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <900000>;
|
|
+ regulator-max-microvolt = <900000>;
|
|
+ regulator-name = "vdd2l_0v9_ddr_s3";
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <900000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_0v75_hdmi_edp_s0: nldo-reg3 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <750000>;
|
|
+ regulator-max-microvolt = <750000>;
|
|
+ regulator-name = "vdd_0v75_hdmi_edp_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ avdd_0v75_s0: nldo-reg4 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <750000>;
|
|
+ regulator-max-microvolt = <750000>;
|
|
+ regulator-name = "avdd_0v75_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_0v85_s0: nldo-reg5 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <850000>;
|
|
+ regulator-max-microvolt = <850000>;
|
|
+ regulator-name = "vdd_0v85_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pmic@1 {
|
|
+ compatible = "rockchip,rk806";
|
|
+ reg = <0x01>;
|
|
+ #gpio-cells = <2>;
|
|
+ gpio-controller;
|
|
+ interrupt-parent = <&gpio0>;
|
|
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
|
+ pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>,
|
|
+ <&rk806_slave_dvs3_null>;
|
|
+ pinctrl-names = "default";
|
|
+ spi-max-frequency = <1000000>;
|
|
+
|
|
+ //rockchip,system-power-controller;
|
|
+
|
|
+ vcc1-supply = <&vcc5v0_sys>;
|
|
+ vcc2-supply = <&vcc5v0_sys>;
|
|
+ vcc3-supply = <&vcc5v0_sys>;
|
|
+ vcc4-supply = <&vcc5v0_sys>;
|
|
+ vcc5-supply = <&vcc5v0_sys>;
|
|
+ vcc6-supply = <&vcc5v0_sys>;
|
|
+ vcc7-supply = <&vcc5v0_sys>;
|
|
+ vcc8-supply = <&vcc5v0_sys>;
|
|
+ vcc9-supply = <&vcc5v0_sys>;
|
|
+ vcc10-supply = <&vcc5v0_sys>;
|
|
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
|
|
+ vcc12-supply = <&vcc5v0_sys>;
|
|
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
|
|
+ vcc14-supply = <&vcc_2v0_pldo_s3>;
|
|
+ vcca-supply = <&vcc5v0_sys>;
|
|
+
|
|
+ rk806_slave_dvs1_null: dvs1-null-pins {
|
|
+ pins = "gpio_pwrctrl1";
|
|
+ function = "pin_fun0";
|
|
+ };
|
|
+
|
|
+ rk806_slave_dvs2_null: dvs2-null-pins {
|
|
+ pins = "gpio_pwrctrl2";
|
|
+ function = "pin_fun0";
|
|
+ };
|
|
+
|
|
+ rk806_slave_dvs3_null: dvs3-null-pins {
|
|
+ pins = "gpio_pwrctrl3";
|
|
+ function = "pin_fun0";
|
|
+ };
|
|
+
|
|
+ regulators {
|
|
+ vdd_cpu_big1_s0: dcdc-reg1 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <550000>;
|
|
+ regulator-max-microvolt = <1050000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_cpu_big1_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_cpu_big0_s0: dcdc-reg2 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <550000>;
|
|
+ regulator-max-microvolt = <1050000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_cpu_big0_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_cpu_lit_s0: dcdc-reg3 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <550000>;
|
|
+ regulator-max-microvolt = <950000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_cpu_lit_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_3v3_s0: dcdc-reg4 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vcc_3v3_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_cpu_big1_mem_s0: dcdc-reg5 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <675000>;
|
|
+ regulator-max-microvolt = <1050000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_cpu_big1_mem_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+
|
|
+ vdd_cpu_big0_mem_s0: dcdc-reg6 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <675000>;
|
|
+ regulator-max-microvolt = <1050000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_cpu_big0_mem_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_1v8_s0: dcdc-reg7 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vcc_1v8_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_cpu_lit_mem_s0: dcdc-reg8 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <675000>;
|
|
+ regulator-max-microvolt = <950000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_cpu_lit_mem_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vddq_ddr_s0: dcdc-reg9 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-name = "vddq_ddr_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_ddr_s0: dcdc-reg10 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <675000>;
|
|
+ regulator-max-microvolt = <900000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_ddr_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* reserved, unused? */
|
|
+ vcc_1v8_cam_s0: pldo-reg1 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vcc_1v8_cam_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ avdd1v8_ddr_pll_s0: pldo-reg2 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "avdd1v8_ddr_pll_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_1v8_pll_s0: pldo-reg3 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_1v8_pll_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* reserved, unused? */
|
|
+ vcc_3v3_sd_s0: pldo-reg4 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vcc_3v3_sd_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* reserved, unused? */
|
|
+ vcc_2v8_cam_s0: pldo-reg5 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <2800000>;
|
|
+ regulator-max-microvolt = <2800000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vcc_2v8_cam_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* unused */
|
|
+ pldo6_s3: pldo-reg6 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-name = "pldo6_s3";
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_0v75_pll_s0: nldo-reg1 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <750000>;
|
|
+ regulator-max-microvolt = <750000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "vdd_0v75_pll_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_ddr_pll_s0: nldo-reg2 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <850000>;
|
|
+ regulator-max-microvolt = <850000>;
|
|
+ regulator-name = "vdd_ddr_pll_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ avdd_0v85_s0: nldo-reg3 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <850000>;
|
|
+ regulator-max-microvolt = <850000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "avdd_0v85_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* reserved, unused */
|
|
+ avdd_1v2_cam_s0: nldo-reg4 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1200000>;
|
|
+ regulator-max-microvolt = <1200000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "avdd_1v2_cam_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ avdd_1v2_s0: nldo-reg5 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <1200000>;
|
|
+ regulator-max-microvolt = <1200000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-name = "avdd_1v2_s0";
|
|
+ regulator-state-mem {
|
|
+ regulator-off-in-suspend;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&combphy0_ps {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&combphy1_ps {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&saradc {
|
|
+ status = "okay";
|
|
+ vref-supply = <&vcc_1v8_s0>;
|
|
+};
|
|
+
|
|
+&sata0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&tsadc {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart2 {
|
|
+ pinctrl-0 = <&uart2m0_xfer>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+/* WIFI */
|
|
+&pcie2x1l0 {
|
|
+ reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
+ vpcie3v3-supply = <&vcc3v3_wf>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+/* GMAC1 */
|
|
+// VCC_3V3_S0
|
|
+&pcie2x1l1 {
|
|
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&rtl8111_isolate>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&combphy2_psu {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbdp_phy0 {
|
|
+ orientation-switch;
|
|
+ mode-switch;
|
|
+ sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
+ status = "okay";
|
|
+
|
|
+ port {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ usbdp_phy0_orientation_switch: endpoint@0 {
|
|
+ reg = <0>;
|
|
+ remote-endpoint = <&usbc0_orien_sw>;
|
|
+ };
|
|
+
|
|
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
|
+ reg = <1>;
|
|
+ remote-endpoint = <&dp_altmode_mux>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&usbdp_phy0_u3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbdrd3_0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbdrd_dwc3_0 {
|
|
+ dr_mode = "otg";
|
|
+ usb-role-switch;
|
|
+
|
|
+ port {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ dwc3_0_role_switch: endpoint@0 {
|
|
+ reg = <0>;
|
|
+ remote-endpoint = <&usbc0_role_sw>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&u2phy0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&u2phy0_otg {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbdp_phy1 {
|
|
+ //rockchip,dp-lane-mux = <2 3>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbdp_phy1_u3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbdrd3_1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&u2phy1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&u2phy1_otg {
|
|
+ phy-supply = <&vcc5v0_host>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&i2c2 {
|
|
+ usbc0: usb-typec@4e {
|
|
+ compatible = "hynetek,husb311";
|
|
+ reg = <0x4e>;
|
|
+ interrupt-parent = <&gpio3>;
|
|
+ interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&usbc0_int>;
|
|
+ vbus-supply = <&vbus5v0_typec>;
|
|
+ usb-role-switch = <>;
|
|
+
|
|
+ ports {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ usbc0_role_sw: endpoint {
|
|
+ remote-endpoint = <&dwc3_0_role_switch>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ usb_con: connector {
|
|
+ compatible = "usb-c-connector";
|
|
+ label = "USB-C";
|
|
+ data-role = "dual";
|
|
+ power-role = "dual";
|
|
+ try-power-role = "source";
|
|
+ op-sink-microwatt = <1000000>;
|
|
+ sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
|
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
+
|
|
+ /*
|
|
+ altmodes {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ altmode@0 {
|
|
+ reg = <0>;
|
|
+ svid = <0xff01>;
|
|
+ vdo = <0xffffffff>;
|
|
+ };
|
|
+ };
|
|
+ */
|
|
+
|
|
+ ports {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ port@0 {
|
|
+ reg = <0>;
|
|
+ usbc0_orien_sw: endpoint {
|
|
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ port@1 {
|
|
+ reg = <1>;
|
|
+ dp_altmode_mux: endpoint {
|
|
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+/* PCIe 3.0 */
|
|
+
|
|
+&pcie30phy {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&pcie3x4 {
|
|
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
+ vpcie3v3-supply = <&vcc3v3_pcie30>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+/* sound */
|
|
+
|
|
+&i2c7 {
|
|
+ status = "okay";
|
|
+
|
|
+ /* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
|
|
+ es8388: audio-codec@11 {
|
|
+ compatible = "everest,es8388";
|
|
+ reg = <0x11>;
|
|
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
+ clock-names = "mclk";
|
|
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
+ assigned-clock-rates = <12288000>;
|
|
+ #sound-dai-cells = <0>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2s0_8ch {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2s0_lrck
|
|
+ &i2s0_mclk
|
|
+ &i2s0_sclk
|
|
+ &i2s0_sdi0
|
|
+ &i2s0_sdo0>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+/* BT codec */
|
|
+&i2s2_2ch {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+/* bluetooth */
|
|
+
|
|
+/*
|
|
+ * - chip?
|
|
+&uart8 {
|
|
+ status = "okay";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart8m1_xfer &uart8m1_ctsn>;
|
|
+
|
|
+ bluetooth {
|
|
+ // HOST_WAKE_BT_H GPIO3_A1_u
|
|
+ // BT_WAKE_HOST_H GPIO3_A0_u
|
|
+ };
|
|
+};
|
|
+*/
|
|
--
|
|
2.34.1
|
|
|