build/patch/kernel/archive/sunxi-6.5/patches.megous/usb-musb-sunxi-Avoid-enabling-host-side-code-on-SoCs-where-it-s.patch

108 lines
3.7 KiB
Diff

From 7267720c1091e43a6115a2d1b5c353a773061f15 Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megi@xff.cz>
Date: Mon, 6 Mar 2023 01:19:52 +0100
Subject: [PATCH 110/464] usb: musb: sunxi: Avoid enabling host side code on
SoCs where it's not used
For some sunxi SoCs host side code is active but unused, because
phy re-routes USB handling to a regular EHCI/OHCI driver.
When host side code of musb is left initialized it sometimes
interferes with suspend to RAM. Disabling the host side code
on SoCs that re-route host mode to a regular *HCI hardware
block fixes the issue.
Issue: https://gitlab.com/postmarketOS/pmaports/-/issues/1478
Signed-off-by: Ondrej Jirman <megi@xff.cz>
---
drivers/usb/musb/musb_core.c | 10 ++++++++++
drivers/usb/musb/sunxi.c | 30 +++++++++++++++++++++++-------
2 files changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ecbd3784bec3..52aa9fd55d51 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -975,6 +975,16 @@ static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl)
case OTG_STATE_B_IDLE:
musb_g_disconnect(musb);
break;
+ case OTG_STATE_A_WAIT_VRISE:
+ /*
+ * For sunxi use case, where host side of the musb driver
+ * is not used for host mode, we want to ignore
+ * OTG_STATE_A_WAIT_VRISE state set in sunxi glue code
+ * when transitioning to host mode on disconnect, in
+ * order to not confuse the dmesg reader about possible
+ * issues.
+ */
+ break;
default:
WARNING("unhandled DISCONNECT transition (%s)\n",
musb_otg_state_string(musb));
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index c5c6c4e09300..1f753cbdcea0 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -353,12 +353,6 @@ static int sunxi_musb_set_mode(struct musb *musb, u8 mode)
if (glue->phy_mode == new_mode)
return 0;
- if (musb->port_mode != MUSB_OTG) {
- dev_err(musb->controller->parent,
- "Error changing modes is only supported in dual role mode\n");
- return -EINVAL;
- }
-
if (musb->port1_status & USB_PORT_STAT_ENABLE)
musb_root_disconnect(musb);
@@ -677,13 +671,22 @@ static const struct musb_hdrc_config sunxi_musb_hdrc_config_4eps = {
.ram_bits = SUNXI_MUSB_RAM_BITS,
};
+static const char * const sunxi_musb_host_rerouted_phys[] = {
+ "allwinner,sun8i-h3-usb-phy",
+ "allwinner,sun8i-r40-usb-phy",
+ "allwinner,sun8i-v3s-usb-phy",
+ "allwinner,sun50i-a64-usb-phy",
+ "allwinner,sun50i-h6-usb-phy",
+ NULL,
+};
+
static int sunxi_musb_probe(struct platform_device *pdev)
{
struct musb_hdrc_platform_data pdata;
struct platform_device_info pinfo;
struct sunxi_glue *glue;
- struct device_node *np = pdev->dev.of_node;
const struct sunxi_musb_cfg *cfg;
+ struct device_node *np = pdev->dev.of_node, *phy_np;
int ret;
if (!np) {
@@ -764,6 +767,19 @@ static int sunxi_musb_probe(struct platform_device *pdev)
return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy),
"Error getting phy\n");
+ /*
+ * Host mode is handled outside of the musb driver on some allwinner
+ * SoCs. We don't need musb host side code to be enabled at all.
+ * In fact it causes occasional issues with suspend to ram, when
+ * the host side code is enabled and unused (due to phy being re-routed
+ * to a different *HCI controller).
+ */
+ phy_np = glue->phy->dev.of_node;
+ if (of_device_compatible_match(phy_np, sunxi_musb_host_rerouted_phys)) {
+ dev_info(&pdev->dev, "Disabling musb host side code due to re-routed phy\n");
+ pdata.mode = MUSB_PERIPHERAL;
+ }
+
glue->usb_phy = usb_phy_generic_register();
if (IS_ERR(glue->usb_phy)) {
dev_err(&pdev->dev, "Error registering usb-phy %ld\n",
--
2.34.1