275 lines
6.0 KiB
Diff
275 lines
6.0 KiB
Diff
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
|
|
index 9fb38682e6..a6d8361602 100644
|
|
--- a/arch/arm/dts/Makefile
|
|
+++ b/arch/arm/dts/Makefile
|
|
@@ -120,6 +120,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3368) += \
|
|
rk3368-px5-evb.dtb \
|
|
|
|
dtb-$(CONFIG_ROCKCHIP_RK3399) += \
|
|
+ rk3399-clockworkpi-a06.dtb \
|
|
rk3399-evb.dtb \
|
|
rk3399-ficus.dtb \
|
|
rk3399-firefly.dtb \
|
|
diff --git a/arch/arm/dts/rk3399-clockworkpi-a06-u-boot.dtsi b/arch/arm/dts/rk3399-clockworkpi-a06-u-boot.dtsi
|
|
new file mode 100644
|
|
index 0000000000..82d4a5db44
|
|
--- /dev/null
|
|
+++ b/arch/arm/dts/rk3399-clockworkpi-a06-u-boot.dtsi
|
|
@@ -0,0 +1,23 @@
|
|
+// SPDX-License-Identifier: GPL-2.0+
|
|
+
|
|
+#include "rk3399-u-boot.dtsi"
|
|
+#include "rk3399-sdram-lpddr4-100.dtsi"
|
|
+
|
|
+/ {
|
|
+ chosen {
|
|
+ stdout-path = "serial2:1500000n8";
|
|
+ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ u-boot,dm-pre-reloc;
|
|
+};
|
|
+
|
|
+&rk808 {
|
|
+ u-boot,dm-pre-reloc;
|
|
+};
|
|
+
|
|
+&sdmmc {
|
|
+ u-boot,dm-pre-reloc;
|
|
+};
|
|
diff --git a/arch/arm/dts/rk3399-clockworkpi-a06.dts b/arch/arm/dts/rk3399-clockworkpi-a06.dts
|
|
new file mode 100644
|
|
index 0000000000..b32b74abb5
|
|
--- /dev/null
|
|
+++ b/arch/arm/dts/rk3399-clockworkpi-a06.dts
|
|
@@ -0,0 +1,162 @@
|
|
+/*
|
|
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
|
+ *
|
|
+ * SPDX-License-Identifier: GPL-2.0+
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+#include <dt-bindings/pwm/pwm.h>
|
|
+#include <dt-bindings/pinctrl/rockchip.h>
|
|
+#include "rk3399.dtsi"
|
|
+#include "rk3399-opp.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Clockworkpi A06";
|
|
+ compatible = "clockwork,devterm-a06", "rockchip,rk3399";
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial2:1500000n8";
|
|
+ };
|
|
+
|
|
+ vdd_center: vdd-center {
|
|
+ compatible = "pwm-regulator";
|
|
+ pwms = <&pwm3 0 25000 1>;
|
|
+ regulator-name = "vdd_center";
|
|
+ regulator-min-microvolt = <800000>;
|
|
+ regulator-max-microvolt = <1400000>;
|
|
+ regulator-init-microvolt = <950000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ vccsys: vccsys {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vccsys";
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ vcc3v3_sys: vcc3v3-sys {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3_sys";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ };
|
|
+
|
|
+ vcc_phy: vcc-phy-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc_phy";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ };
|
|
+
|
|
+ vcc5v0_host: vcc5v0-host-en {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc5v0_host";
|
|
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ vcc5v0_typec0: vcc5v0-typec0-en {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc5v0_typec0";
|
|
+ gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ vcc5v0_typec1: vcc5v0-typec1-en {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc5v0_typec1";
|
|
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ clkin_gmac: external-gmac-clock {
|
|
+ compatible = "fixed-clock";
|
|
+ clock-frequency = <125000000>;
|
|
+ clock-output-names = "clkin_gmac";
|
|
+ #clock-cells = <0>;
|
|
+ };
|
|
+
|
|
+};
|
|
+
|
|
+&saradc {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sdmmc {
|
|
+ bus-width = <4>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sdhci {
|
|
+ bus-width = <8>;
|
|
+ mmc-hs400-1_8v;
|
|
+ mmc-hs400-enhanced-strobe;
|
|
+ non-removable;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ehci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ohci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host1_ehci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host1_ohci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ status = "okay";
|
|
+ clock-frequency = <400000>;
|
|
+ i2c-scl-falling-time-ns = <50>;
|
|
+ i2c-scl-rising-time-ns = <100>;
|
|
+
|
|
+ rk808: pmic@1b {
|
|
+ compatible = "rockchip,rk808";
|
|
+ clock-output-names = "xin32k", "wifibt_32kin";
|
|
+ interrupt-parent = <&gpio0>;
|
|
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pmic_int_l>;
|
|
+ reg = <0x1b>;
|
|
+ rockchip,system-power-controller;
|
|
+ #clock-cells = <1>;
|
|
+ status = "okay";
|
|
+
|
|
+ vcc12-supply = <&vcc3v3_sys>;
|
|
+
|
|
+ regulators {
|
|
+ vcc33_lcd: SWITCH_REG2 {
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-name = "vcc33_lcd";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ pmic {
|
|
+ pmic_int_l: pmic-int-l {
|
|
+ rockchip,pins =
|
|
+ <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+ };
|
|
+
|
|
+ pmic_dvs2: pmic-dvs2 {
|
|
+ rockchip,pins =
|
|
+ <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
diff --git a/configs/clockworkpi-a06-rk3399_defconfig b/configs/clockworkpi-a06-rk3399_defconfig
|
|
new file mode 100644
|
|
index 0000000000..398ed3592f
|
|
--- /dev/null
|
|
+++ b/configs/clockworkpi-a06-rk3399_defconfig
|
|
@@ -0,0 +1,56 @@
|
|
+CONFIG_ARM=y
|
|
+CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
+CONFIG_ARCH_ROCKCHIP=y
|
|
+CONFIG_SYS_TEXT_BASE=0x00200000
|
|
+CONFIG_NR_DRAM_BANKS=1
|
|
+CONFIG_ENV_OFFSET=0x3F8000
|
|
+CONFIG_ROCKCHIP_RK3399=y
|
|
+CONFIG_TARGET_EVB_RK3399=y
|
|
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
|
|
+CONFIG_DEBUG_UART_CLOCK=24000000
|
|
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-clockworkpi-a06"
|
|
+CONFIG_DEBUG_UART=y
|
|
+CONFIG_SYS_LOAD_ADDR=0x800800
|
|
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-clockworkpi-a06.dtb"
|
|
+CONFIG_MISC_INIT_R=y
|
|
+# CONFIG_DISPLAY_CPUINFO is not set
|
|
+CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
|
+CONFIG_SPL_STACK_R=y
|
|
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
|
|
+CONFIG_TPL=y
|
|
+CONFIG_CMD_BOOTZ=y
|
|
+CONFIG_CMD_GPT=y
|
|
+CONFIG_CMD_MMC=y
|
|
+CONFIG_CMD_USB=y
|
|
+# CONFIG_CMD_SETEXPR is not set
|
|
+CONFIG_CMD_TIME=y
|
|
+CONFIG_SPL_OF_CONTROL=y
|
|
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
+CONFIG_ENV_IS_IN_MMC=y
|
|
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
+CONFIG_ROCKCHIP_GPIO=y
|
|
+CONFIG_SYS_I2C_ROCKCHIP=y
|
|
+CONFIG_MMC_DW=y
|
|
+CONFIG_MMC_DW_ROCKCHIP=y
|
|
+CONFIG_MMC_SDHCI=y
|
|
+CONFIG_MMC_SDHCI_ROCKCHIP=y
|
|
+CONFIG_PMIC_RK8XX=y
|
|
+CONFIG_REGULATOR_RK8XX=y
|
|
+CONFIG_RAM_RK3399_LPDDR4=y
|
|
+CONFIG_RAM_ROCKCHIP_DEBUG=y
|
|
+CONFIG_BAUDRATE=1500000
|
|
+CONFIG_DEBUG_UART_SHIFT=2
|
|
+CONFIG_SYSRESET=y
|
|
+CONFIG_USB=y
|
|
+CONFIG_USB_XHCI_HCD=y
|
|
+CONFIG_USB_XHCI_DWC3=y
|
|
+CONFIG_USB_EHCI_HCD=y
|
|
+CONFIG_USB_EHCI_GENERIC=y
|
|
+CONFIG_USB_KEYBOARD=y
|
|
+CONFIG_DM_VIDEO=y
|
|
+CONFIG_DISPLAY=y
|
|
+CONFIG_VIDEO_ROCKCHIP=y
|
|
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
|
|
+CONFIG_SPL_TINY_MEMSET=y
|
|
+CONFIG_ERRNO_STR=y
|
|
--
|
|
2.25.1
|
|
|