build/packages/bsp/armbian_first_run.txt.template

45 lines
1.5 KiB
Plaintext

#-----------------------------------------------------------------
# Armbian first run configuration
# Set optional end user configuration
# - Rename this file from /boot/armbian_first_run.txt.template to /boot/armbian_first_run.txt
# - Settings below will be applied only on 1st run of Armbian
#-----------------------------------------------------------------
#-----------------------------------------------------------------
# General:
# 1 = delete this file, after first run setup is completed.
FR_general_delete_this_file_after_completion=1
#-----------------------------------------------------------------
#Networking:
# Change default network settings
# Set to 1 to apply any network related settings below
FR_net_change_defaults=0
# Enable WiFi or Ethernet.
# NB: If both are enabled, WiFi will take priority and Ethernet will be disabled.
FR_net_ethernet_enabled=1
FR_net_wifi_enabled=0
#Enter your WiFi creds
# SECURITY WARN: Your wifi keys will be stored in plaintext, no encryption.
FR_net_wifi_ssid='MySSID'
FR_net_wifi_key='MyWiFiKEY'
# Country code to enable power ratings and channels for your country. eg: GB US DE | https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2
FR_net_wifi_countrycode='GB'
#If you want to use a static ip, set it here
FR_net_use_static=0
FR_net_static_ip='192.168.0.100'
FR_net_static_mask='255.255.255.0'
FR_net_static_gateway='192.168.0.1'
FR_net_static_dns='8.8.8.8 8.8.4.4' #2 entries max, seperated by a space.
#-----------------------------------------------------------------