aixiao/build
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dc60fd799b
build/patch/kernel/archive/sunxi-6.5/patches.armbian/drv-net-phy-Add-support-for-AC200-EPHY.patch

273 lines
7.3 KiB
Diff
Raw Blame History

From b7c0b9b054e7a9df3d2d0087491017f345d18daf Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Fri, 16 Aug 2019 16:38:57 +0200
Subject: [PATCH 006/153] drv:net:phy: Add support for AC200 EPHY
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
drivers/net/phy/Kconfig | 7 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/ac200.c | 220 +++++++++++++++++++++++++++++++++++++++
3 files changed, 228 insertions(+)
create mode 100644 drivers/net/phy/ac200.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1327290de..61684250a 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -62,6 +62,13 @@ config SFP
comment "MII PHY device drivers"
+config AC200_PHY
+ tristate "AC200 EPHY"
+ depends on NVMEM
+ depends on OF
+ help
+ Fast ethernet PHY as found in X-Powers AC200 multi-function device.
+
config AMD_PHY
tristate "AMD PHYs"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index f7138d3c8..9ad2b8cc0 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SFP) += sfp.o
sfp-obj-$(CONFIG_SFP) += sfp-bus.o
obj-y += $(sfp-obj-y) $(sfp-obj-m)
+obj-$(CONFIG_AC200_PHY) += ac200.o
obj-$(CONFIG_ADIN_PHY) += adin.o
obj-$(CONFIG_ADIN1100_PHY) += adin1100.o
obj-$(CONFIG_AMD_PHY) += amd.o
diff --git a/drivers/net/phy/ac200.c b/drivers/net/phy/ac200.c
new file mode 100644
index 000000000..cb713188f
--- /dev/null
+++ b/drivers/net/phy/ac200.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/**
+ * Driver for AC200 Ethernet PHY
+ *
+ * Copyright (c) 2020 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/ac200.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define AC200_EPHY_ID 0x00441400
+#define AC200_EPHY_ID_MASK 0x0ffffff0
+
+/* macros for system ephy control 0 register */
+#define AC200_EPHY_RESET_INVALID BIT(0)
+#define AC200_EPHY_SYSCLK_GATING BIT(1)
+
+/* macros for system ephy control 1 register */
+#define AC200_EPHY_E_EPHY_MII_IO_EN BIT(0)
+#define AC200_EPHY_E_LNK_LED_IO_EN BIT(1)
+#define AC200_EPHY_E_SPD_LED_IO_EN BIT(2)
+#define AC200_EPHY_E_DPX_LED_IO_EN BIT(3)
+
+/* macros for ephy control register */
+#define AC200_EPHY_SHUTDOWN BIT(0)
+#define AC200_EPHY_LED_POL BIT(1)
+#define AC200_EPHY_CLK_SEL BIT(2)
+#define AC200_EPHY_ADDR(x) (((x) & 0x1F) << 4)
+#define AC200_EPHY_XMII_SEL BIT(11)
+#define AC200_EPHY_CALIB(x) (((x) & 0xF) << 12)
+
+struct ac200_ephy_dev {
+ struct clk *clk;
+ struct phy_driver *ephy;
+ struct regmap *regmap;
+};
+
+static char *ac200_phy_name = "AC200 EPHY";
+
+static int ac200_ephy_config_init(struct phy_device *phydev)
+{
+ const struct ac200_ephy_dev *priv = phydev->drv->driver_data;
+ unsigned int value;
+ int ret;
+
+ phy_write(phydev, 0x1f, 0x0100); /* Switch to Page 1 */
+ phy_write(phydev, 0x12, 0x4824); /* Disable APS */
+
+ phy_write(phydev, 0x1f, 0x0200); /* Switch to Page 2 */
+ phy_write(phydev, 0x18, 0x0000); /* PHYAFE TRX optimization */
+
+ phy_write(phydev, 0x1f, 0x0600); /* Switch to Page 6 */
+ phy_write(phydev, 0x14, 0x708f); /* PHYAFE TX optimization */
+ phy_write(phydev, 0x13, 0xF000); /* PHYAFE RX optimization */
+ phy_write(phydev, 0x15, 0x1530);
+
+ phy_write(phydev, 0x1f, 0x0800); /* Switch to Page 6 */
+ phy_write(phydev, 0x18, 0x00bc); /* PHYAFE TRX optimization */
+
+ phy_write(phydev, 0x1f, 0x0100); /* switch to page 1 */
+ phy_clear_bits(phydev, 0x17, BIT(3)); /* disable intelligent IEEE */
+
+ /* next two blocks disable 802.3az IEEE */
+ phy_write(phydev, 0x1f, 0x0200); /* switch to page 2 */
+ phy_write(phydev, 0x18, 0x0000);
+
+ phy_write(phydev, 0x1f, 0x0000); /* switch to page 0 */
+ phy_clear_bits_mmd(phydev, 0x7, 0x3c, BIT(1));
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RMII)
+ value = AC200_EPHY_XMII_SEL;
+ else
+ value = 0;
+
+ ret = regmap_update_bits(priv->regmap, AC200_EPHY_CTL,
+ AC200_EPHY_XMII_SEL, value);
+ if (ret)
+ return ret;
+
+ /* FIXME: This is H6 specific */
+ phy_set_bits(phydev, 0x13, BIT(12));
+
+ return 0;
+}
+
+static int ac200_ephy_probe(struct platform_device *pdev)
+{
+ struct ac200_dev *ac200 = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct ac200_ephy_dev *priv;
+ struct nvmem_cell *calcell;
+ struct phy_driver *ephy;
+ u16 *caldata, calib;
+ size_t callen;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ephy = devm_kzalloc(dev, sizeof(*ephy), GFP_KERNEL);
+ if (!ephy)
+ return -ENOMEM;
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "Can't obtain the clock!\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ calcell = devm_nvmem_cell_get(dev, "calibration");
+ if (IS_ERR(calcell)) {
+ dev_err(dev, "Unable to find calibration data!\n");
+ return PTR_ERR(calcell);
+ }
+
+ caldata = nvmem_cell_read(calcell, &callen);
+ if (IS_ERR(caldata)) {
+ dev_err(dev, "Unable to read calibration data!\n");
+ return PTR_ERR(caldata);
+ }
+
+ if (callen != 2) {
+ dev_err(dev, "Calibration data has wrong length: 2 != %zu\n",
+ callen);
+ kfree(caldata);
+ return -EINVAL;
+ }
+
+ calib = *caldata + 3;
+ kfree(caldata);
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+
+ ephy->phy_id = AC200_EPHY_ID;
+ ephy->phy_id_mask = AC200_EPHY_ID_MASK;
+ ephy->name = ac200_phy_name;
+ ephy->driver_data = priv;
+ ephy->soft_reset = genphy_soft_reset;
+ ephy->config_init = ac200_ephy_config_init;
+ ephy->suspend = genphy_suspend;
+ ephy->resume = genphy_resume;
+
+ priv->ephy = ephy;
+ priv->regmap = ac200->regmap;
+ platform_set_drvdata(pdev, priv);
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_EPHY_CTL0,
+ AC200_EPHY_RESET_INVALID |
+ AC200_EPHY_SYSCLK_GATING);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_EPHY_CTL1,
+ AC200_EPHY_E_EPHY_MII_IO_EN |
+ AC200_EPHY_E_LNK_LED_IO_EN |
+ AC200_EPHY_E_SPD_LED_IO_EN |
+ AC200_EPHY_E_DPX_LED_IO_EN);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(ac200->regmap, AC200_EPHY_CTL,
+ AC200_EPHY_LED_POL |
+ AC200_EPHY_CLK_SEL |
+ AC200_EPHY_ADDR(1) |
+ AC200_EPHY_CALIB(calib));
+ if (ret)
+ return ret;
+
+ ret = phy_driver_register(priv->ephy, THIS_MODULE);
+ if (ret) {
+ dev_err(dev, "Unable to register phy\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ac200_ephy_remove(struct platform_device *pdev)
+{
+ struct ac200_ephy_dev *priv = platform_get_drvdata(pdev);
+
+ phy_driver_unregister(priv->ephy);
+
+ regmap_write(priv->regmap, AC200_EPHY_CTL, AC200_EPHY_SHUTDOWN);
+ regmap_write(priv->regmap, AC200_SYS_EPHY_CTL1, 0);
+ regmap_write(priv->regmap, AC200_SYS_EPHY_CTL0, 0);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static const struct of_device_id ac200_ephy_match[] = {
+ { .compatible = "x-powers,ac200-ephy" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ac200_ephy_match);
+
+static struct platform_driver ac200_ephy_driver = {
+ .probe = ac200_ephy_probe,
+ .remove = ac200_ephy_remove,
+ .driver = {
+ .name = "ac200-ephy",
+ .of_match_table = ac200_ephy_match,
+ },
+};
+module_platform_driver(ac200_ephy_driver);
+
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@siol.net>");
+MODULE_DESCRIPTION("AC200 Ethernet PHY driver");
+MODULE_LICENSE("GPL");
--
2.35.3
Reference in New Issue View Git Blame Copy Permalink