128 lines
2.6 KiB
Diff
128 lines
2.6 KiB
Diff
--- /dev/null
|
|
+++ b/arch/arm/dts/rk3328-roc-pc.dts
|
|
@@ -0,0 +1,124 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+// Copyright (c) 2021 T-Chip Intelligent Technology Co., Ltd
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include <dt-bindings/input/input.h>
|
|
+
|
|
+#include "rk3328-roc-cc.dts"
|
|
+
|
|
+/ {
|
|
+ model = "Firefly ROC-RK3328-PC";
|
|
+ compatible = "firefly,roc-rk3328-pc", "rockchip,rk3328";
|
|
+
|
|
+ adc-keys {
|
|
+ compatible = "adc-keys";
|
|
+ io-channels = <&saradc 0>;
|
|
+ io-channel-names = "buttons";
|
|
+ keyup-threshold-microvolt = <1750000>;
|
|
+
|
|
+ /* This button is unpopulated out of the factory. */
|
|
+ button-recovery {
|
|
+ label = "Recovery";
|
|
+ linux,code = <KEY_VENDOR>;
|
|
+ press-threshold-microvolt = <10000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ ir-receiver {
|
|
+ compatible = "gpio-ir-receiver";
|
|
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
|
+ linux,rc-map-name = "rc-station";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&ir_int>;
|
|
+ };
|
|
+
|
|
+ sdio_pwrseq: sdio-pwrseq {
|
|
+ compatible = "mmc-pwrseq-simple";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&wifi_en>, <&wifi_host_wake>;
|
|
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&codec {
|
|
+ mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
|
|
+};
|
|
+
|
|
+&gpu {
|
|
+ mali-supply = <&vdd_logic>;
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ ir {
|
|
+ ir_int: ir-int {
|
|
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ sdmmcio {
|
|
+ sdio_per_pin: sdio-per-pin {
|
|
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ wifi {
|
|
+ wifi_en: wifi-en {
|
|
+ rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+
|
|
+ wifi_host_wake: wifi-host-wake {
|
|
+ rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_4ma>;
|
|
+ };
|
|
+
|
|
+ bt_rst: bt-rst {
|
|
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+
|
|
+ bt_en: bt-en {
|
|
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+//&sdmmc_ext {
|
|
+// bus-width = <4>;
|
|
+// cap-sd-highspeed;
|
|
+// cap-sdio-irq;
|
|
+// keep-power-in-suspend;
|
|
+// mmc-pwrseq = <&sdio_pwrseq>;
|
|
+// non-removable;
|
|
+// num-slots = <1>;
|
|
+// pinctrl-names = "default";
|
|
+// pinctrl-0 = <&sdmmc0ext_bus4 &sdmmc0ext_cmd &sdmmc0ext_clk>;
|
|
+// sd-uhs-sdr104;
|
|
+// status = "okay";
|
|
+//};
|
|
+
|
|
+&pmic_int_l {
|
|
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+};
|
|
+
|
|
+&rk805 {
|
|
+ interrupt-parent = <&gpio0>;
|
|
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
|
+};
|
|
+
|
|
+&saradc {
|
|
+ vref-supply = <&vcc_18>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb20_host_drv {
|
|
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
+};
|
|
+
|
|
+&vcc_host1_5v {
|
|
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
+};
|
|
+
|
|
+&vcc_sdio {
|
|
+ gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdio_per_pin>;
|
|
+};
|