# parts

moduleID: SparkFun-Sensors-DCM01-
family: sparkfun reflective blood sensor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: DCM01 Reflective Blood Sensor
label: U
date: 2013-02-13
path: core/sparkfun-sensors-dcm01-.fzp
description:
<b>DCM01 Reflective Blood Sensor</b><br>
UNPROVEN<br>
Sensor head for Pulse Oximeter.  Contains IR and visible red LEDs, and PIN photodiode.<br>
<href=http://www.apmkr.com/bio-device/DCM01_datasheet.pdf>http://www.apmkr.com/bio-device/DCM01_datasheet.pdf</a>


moduleID: ludusProtoShield
family: sparkfun shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Ludus ProtoShield
date: 2015-10-31
path: core/ludusProtoShield.fzp
description:
SparkFun Ludus Protoshield

Description: The SparkFun Ludus Protoshield is an Arduino compatible shield designed to make connecting motors and sensors to your Arduino-based development board as fast and easy as possible. Each Ludus shield has been equipped with a small prototyping area for quick integration of Arduino projects without the need of a separate breadboard. Simply assemble what you need in the prototyping area, attach this shield to your Arduino, and you will be up and running in no time. The SparkFun Ludus Protoshield was developed by our Education department to help teach any interested individual the dynamics of motor control through the Arduino IDE and was lovingly named after their very own mascot.



The heart of the Ludus ProtoShield is an H-Bridge Motor Driver. This allows the ProtoShield to drive two DC motors at once in both directions and brake electronically. The TB6612FNG H-Bridge Driver is rated up to 1.2A per channel at 13V which means it will drive a fair variety of hobby motors ranging in power. This Ludus board also features PWR and GND rails alongside the GPIO pins. Not only does this help you to avoid the common inconvenience of running out of GND and PWR pins, but because the pins are arranged with PWR in the center, plugging in servos is a snap! The PWR rail can even be switched between 5V (from the Arduino’s voltage regulator) and Vin using the on board slide switches. These features make the SparkFun Ludus Protoshield ideal for small rover-style robots.



This specific Ludus Protoshield includes an I2C header that has been laid out so that you can plug in a device such as a magnetometer or a 9DOF sensor. With these sensors it’s possible to set up a a nice a reliable navigation system.


moduleID: SparkFun-Sensors-VCNL4000-
family: sparkfun proximity sensor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: VCNL4000
label: U
date: 2013-02-13
path: core/sparkfun-sensors-vcnl4000-.fzp
description:
Fully integrated proximity and ambient light sensor with infrared emitter and I2C interface<br>
<br>


moduleID: SparkFun-Connectors-M10X2-SPECIAL
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: M10X2
label: U
date: 2013-02-13
path: core/sparkfun-connectors-m10x2-special.fzp
description:
This was SPECIALLY designed to be used with our Graphic LCD Backpack.  Be sure you want to use this!  It is not only staggered on each line of header holes, but IT IS ALSO offset of the center point of the top and bottom lines by 5 mil.  This causes the headers to lock into place on the standard footprint on the LCD screen.  The extra squares on the tdocu layer are there simply to reference other pins (if you were to actually populate a longer header than ten long - this is what we do with the backpacks).


moduleID: SparkFun-RF-GR-10-SMD
family: sparkfun gps module
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: GR-10 GPS Receiver Module
label: U
date: 2013-02-13
path: core/sparkfun-rf-gr-10-smd.fzp
description:
<b>GR-10 GPS Receiver Module</b>
Proto layout and schematic for GR-10 GPS receiver. Spark Fun Electronics SKU : GPS-08291


moduleID: seeeduino_v3
family: microcontroller board (seeed)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Yihui Xiong
title: Seeeduino V3.0
path: core/seeed_seeeduino_v3.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'SimSun'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Seeeduino V3 is a microcontroller board based on the ATmega328.</p></body></html>


moduleID: 23LCV1024_24357530b44412a899aa27521bf5766d_1
family: memory
version: 4
fritzingversion: 0.12.34
author: Christoph Rieder
title: 23LCV1024
label: 23LCV1024
taxonomy: part.dip.8.pins
path: core/23LCV1024_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Serial SRAM</p></body></html>


moduleID: Real_Time_Clock_Module___DS1307_RTC_Breakout_Board
family: real time clock breakout
fritzingversion: 0.6.3b.08.16.5401
author: Mike
title: Real Time Clock Module - DS1307 RTC Breakout Board
date: 2011-09-07
path: core/Real_Time_Clock_Module___DS1307_RTC_Breakout_Board.fzp
description:
This a custom designed module for the DS1307 Real Time Clock. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium coin cell battery (CR1225 41mAh) will run the module for a minimum of 9 years (17 years typical) without external 5V power. The DS1307 is accessed via the I2C protocol. We've written a test-bed to program the modules. This test-bed code should give you some insight on how to interface the module to any microcontroller using our example software I2C and BCD routines.











Features:











Two wire I2C interface 











Hour : Minutes : Seconds AM/PM 











Day Month, Date - Year 











Leap year compensation 











Accurate calendar up to year 2100 











Battery backup included 











1Hz output pin 











56 Bytes of Non-volatile memory available to user











Dimensions: 0.75x0.75" (20x20mm)























Documents:











RTC Module Schematic 











RTC Module Dimensional Drawing 











DS1307 Datasheet 











Wiring Example











Software: 











Example 16F88 code 











Arduino Tutorial. Thanks John Vaughters! 











Arduino Tutorial in Portuguese. Thanks Daniel Gonçalves! 











Bildr Tutorial


moduleID: LilyPad Coincell-Battery-v17
family: microcontroller board (lilypad)
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LilyPad Coin Cell Battery Holder
date: 2013-05-25
path: core/LilyPad Coincell-Battery-v17.fzp
description:
 If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It's a simple board which holds a 20mm coin cell battery (such as a CR2032) and gives you 4 connection points (two positive and two negative) for sewing into your project.

Note: The LilyPad Coin Cell Battery Holder is a design conceived by Felicia Williams of Boulder, Colorado. Also, a portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles. 


moduleID: 1e03b59a-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_20
author: Fritzing Part-o-matic
title: Mystery Part - 20 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.20pins
path: obsolete/mystery_part20.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 20 pins on a 100 mil inline pin header footprint.


moduleID: SparkFun_Stepoko
family: sparkfun board
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: SparkFun Stepoko
date: 2015-10-25
path: core/SparkFun_Stepoko.fzp
description:
This is a Steppermotor controller. it can control 3 stepper motors, one board for xyz-axis movement controll


moduleID: jlpcb-128
family: microcontroller board (jeelabs)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Jean-Claude Wippler
title: JeeNode wireless microcontroller
date: 2011-12-04
path: core/jlpcb-128.fzp
description:
The JeeNode is a low-cost combination of radio and microcontroller board. Think of the JeeNode as an Arduino + Xbee shield + Xbee, but smaller and less feature-full than the XBee. This is the through-hole kit, but the headers are pin-compatible with the JeeNode SMD, the JeeNode SMD, and the SMD Kit.


moduleID: 4081_4_x_2_input_AND_gate_single
family: 40xx 4x2 input logic gate (single part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4081 4 x 2 Input AND Gate, single part
label: U
taxonomy: part.dip.14.pins
path: core/4081_4_x_2_input_AND_gate_single.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4081 4 x 2 Input AND Gate as a single part</span></p></body></html>


moduleID: diac_db3_d93f6c1a94ffd52562268be2e62b9775_9
family: diode
version: 4
fritzingversion: 0.1.beta.1396
author: KingDarBoja
title: DIAC Diode
label: DB
spice: D{instanceTitle} {net connector1} {net connector0} DI_1N4001
path: core/diac_diode_db3.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Standard DIAC (Diode AC) which acts as bi-direccional semiconductor switch based on DB3 STMicroelectronics.</p></body></html>

spicemodel:
*SRC=1N4001;DI_1N4001;Diodes;Si;  50.0V  1.00A  3.00us   Diodes, Inc. diode
.MODEL DI_1N4001 D  ( IS=76.9p RS=42.0m BV=50.0 IBV=5.00u CJO=39.8p  M=0.333 N=1.45 TT=4.32u )


moduleID: cb9c6041c0b15c9c1a63560527d7693a
fritzingversion: 0.3.14b.12.23.3905
author: nvillar
title: Peppermill Power Board
label: Peppermill Power Board
date: 2010-02-05
path: core/Peppermill Power Board.fzp
description:
The Peppermill Power Board (PPB) lets you turn a geared DC motor into a human-powered device.  It also doubles as a sensor that provides information about the direction and rate of turn. 

HOW TO USE

Attach the terminals of a geared DC motor to the grey connector.  Use the white switch to select the maximum operating voltage for your target circuit (2.5, 3.3 or 5.0 Volts), and connect the PPB to your target circuit using the header pins. The pins labelled V+ and GND provide a regulated power supply, and pins Speed and Direction can be connected to analog inputs on a microcontroller. 

The PPB has a built-in PIC microcontroller and an array of LEDs to provide instant feedback about the direction and rate of turn. To use this feature, set the black switch to CAL (Calibrate). Give the motor a quick turn, until you see the LEDs light up briefly. Set the switch to RUN, and when you turn the motor the LEDs should light up in a sequence that matches the direction and rate of turn. 


moduleID: SparkFun-DiscreteSemi-BAV99-
family: sparkfun diode
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: BAV99
label: D
date: 2013-02-13
path: core/sparkfun-discretesemi-bav99-.fzp
description:
Two small signal silicon diodes connected anode to cathode.<br>
Connections to all three nodes available.


moduleID: Arduino Pro
family: microcontroller board (arduino)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: Arduino Pro
path: core/Arduino_Pro.fzp
description:
The Arduino Pro is a microcontroller board based on the ATmega168 (datasheet) or ATmega328 (datasheet). The Pro comes in both 3.3V / 8 MHz and 5V / 16 MHz versions. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a battery power jack, a power switch, a reset button, and holes for mounting a power jack, an ICSP header, and pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

The Arduino Pro is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with Arduino shields. The 3.3V versions of the Pro can be powered with a battery.

The Arduino Pro was designed and manufactured by SparkFun Electronics. 


moduleID: Arduino_MEGA_2560-Rev3(fix)
family: microcontroller board (arduino)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Mega 2560 (Rev3)
date: 2013-04-03
path: core/Arduino_MEGA_2560-Rev3(fix).fzp
description:
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
The Mega 2560 is an update to the Arduino Mega, which it replaces.
The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 programmed as a USB-to-serial converter.

Revision 3 of the board has the following new features:
1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
    Stronger RESET circuit.
    Atmega 16U2 replace the 8U2.


moduleID: Arduino_Leonardo_Rev3
family: //obsolete//microcontroller board (arduino)
version: 4
replacedby: Arduino_Leonardo_Rev3(fix)
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Leonardo (Rev3b)
date: 2013-04-03
path: obsolete/Arduino_Leonardo_Rev3.fzp
description:
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.



The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page. 


moduleID: SparkFun-Sensors-MPL115A-
family: sparkfun barometric pressure sensor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: _h3_MPL115A1 (SPI) and MPL115A2 (I2C) Miniature Digital Barometer__h3_
label: U
date: 2013-02-13
path: core/sparkfun-sensors-mpl115a-.fzp
description:
<b><h3>MPL115A1 (SPI) and MPL115A2 (I2C) Miniature Digital Barometer</h3></b>
<br>
5.0x3.0x1.2mm LGA Package


moduleID: a7ec63797771e5b6f370dca4ff17bc81
family: //obsolete//accelerometers
version: 4
replacedby: ADXL335_v13
fritzingversion: 0.3.13b.12.02.3806
author: Lionel Michel
title: 3-Axis Accelerometer Breakout
label: U
date: 2009-12-09
path: obsolete/accelerometer-adxl.fzp
description:
Accelerometer for sensing three-dimensional orientation/acceleration on a breakout board. Compatible to the ADXL3xx series of sensor chips.


moduleID: AnalogDevices_AD8210YRZ
family: adi-imon
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: AD8210 - High Voltage Birdirectional Current Shunt Monitor
label: U
path: core/ADI_AD8210.AnalogDevices_AD8210YRZ.fzp
spice:
X{instanceTitle} {net connector1} {net connector2} {net connector3} {net connector4} {net connector5} {net connector6} {net connector7} {net connector8} AD8210


moduleID: SparkFun-DigitalIC-INVERTING_SCHMITT_TRIGGER-
family: sparkfun intering schmitt trigger
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: INVERTING_SCHMITT_TRIGGER
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-inverting_schmitt_trigger-.fzp
description:
FAIRCHILD Inverting Schmitt Trigger

UNTESTED FOOTPRINT!!
Used in External Clock Sources.
Digikey P/N NC7SZ14M5XCT-ND


moduleID: SparkFun-PowerIC-MAX1555-
family: sparkfun battery charger ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: MAX1555 Lithium Charger IC
label: U
date: 2013-02-13
path: core/sparkfun-poweric-max1555-.fzp
description:
<b>MAX1555 Lithium Charger IC</b>
SOT-23 Lithium Polymer charging IC. Schematic element and footprint proven. Spark Fun Electronics SKU : COM-00674


moduleID: arch_pro_v1
family: microcontroller board (mbed)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Yihui Xiong
title: Arch Pro V1.0
path: core/seeed_arch_pro_v1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'SimSun'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Arch Pro is an mbed enabled development board.</p></body></html>


moduleID: microsdmodule
family: microsd
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: Richard Bruneau, F.Althaus
title: MicroSD Card Module
label: microSD
path: core/microsdmodule.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A common microSD card module.</p></body></html>


moduleID: Camdenboss_CTB0158-2_5_08mm_pitch_90deg_terminals
family: ctb01x8
version: 5
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen Parry
title: Camdenboss CTB0158-2
label: J
path: core/Camdenboss_CTB0158-2_5_08mm_pitch_90deg_terminals.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Camdenboss CTB0158-2</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">5.08mm (0.2&quot;) Pitch Standard Profile 90 ̊  Rising Clamp Terminal, 2 pole</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The real-life connectors are modular, made up of two or three connector blocks slotted together. These can be further slotted together to make larger connectors.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fritzing part is derived from Screw terminals by Lionel Michel.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Because of the offset between connection pins and screw terminals, these are implemented male / female pairs of connectors with an internal connection.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: SparkFun-Connectors-USB-MINIB--5PIN
family: sparkfun usb connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Mini-USB _B_ connector with 5th pin broken out.
label: U
date: 2013-02-13
path: core/sparkfun-connectors-usb-minib--5pin.fzp
description:
<b>Mini-USB B connector with 5th pin broken out.</b><p>
Created new symbol breaking out 5th ID pin in mini/micro USB connector spec.  See: http://en.wikipedia.org/wiki/Mini_usb#Cables.  Uses same footprint as 4-pin symbol.<p>
 

Also added pins to connect to mounting / shield pads if required (probably not generally needed as signals aren't shielded once they leave the connector).


moduleID: atlas-sientific_Debugger
family: connector
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: Debugger
label: Debugger
path: core/atlas-sientific_Debugger.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Need to get all of your Atlas Scientific equipment calibrated and running smoothly in the shortest amount of time?</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">This Debugger is specially designed to have its pin outs match up directly with all of the Atlas Scientific Circuits. Just plug it into your bread board and your ready to go.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Rapid calibration and debugging</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• 2 different output voltages (3.3 and 5.0)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Header pins directly line up to any Atlas Scientific Circuits</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• This is the exact device used here at Atlas Scientific to test all of</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">  our sensors</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Works as a simple USB to serial converter when not being used   to calibrate/debug</span></p></body></html>


moduleID: FTDI Basic-v13
family: ftdi
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: FTDI Basic Programmer
date: 2011-07-08
path: core/FTDI Basic-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is the newest revision of our <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9115">FTDI Basic</a>. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.</p>


<p>


	This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.<br />


	<br />


	The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.<br />


	<br />


	This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.<br />


	<br />


	This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.<br />


	<br />


	One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.<br />


	<br />


	<span style="font-weight: bold;">Documents: </span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/FTDI%20Basic-v21-5V.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/FTDI Basic-v21-5V.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.google.com/url?sa=t&amp;ct=res&amp;cd=1&amp;url=http%3A%2F%2Fwww.ftdichip.com%2FFTDrivers.htm&amp;ei=D7WlSMGOJKOKiAGx-82BDQ&amp;usg=AFQjCNE2pWdUmKFsw6OAb9hwsC8CtftzFQ&amp;sig2=HQApwDh2F68V38PkMHy6jg" target="_blank">FTDI Drivers</a></li>


</ul>


moduleID: 6DOF-Digital-v10
family: imu
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Andre Knoerig
title: IMU Digital Combo Board 6DOF
date: 2012-01-20
path: core/6DOF-Digital-v10.fzp
description:
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate over I2C and one INT output pin from each sensor is broken out. If you need a simple and tiny board that gives you 6 degrees of freedom, this would be a good choice.


moduleID: 9DoF-Stick-v13
family: imu
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: 9 Degrees of Freedom - Sensor Stick
date: 2011-11-29
path: core/9DoF-Stick-v13.fzp
description:
<div class="description">


	<p>


		<strong>Description:</strong> The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the ITG-3200 gyro. The &#39;stick&#39; has a simple I2C interface and a mounting hole for attaching it to your project. Also, the board is a mere 0.036&quot; thick (0.093&quot; overall), allowing it to be easily mounted in just about any application.</p>


	<p>


		<strong>Dimensions:</strong> 1.37x0.42&quot;</p>


	<p>


		<strong>Documents:</strong></p>


	<ul>


		<li>


			<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/9DoF-Stick-v13.pdf" target="_blank">Schematic</a></li>


		<li>


			<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/9DoF-Stick-v13.zip" target="_blank">Eagle Files</a></li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345.pdf" target="_blank">Datasheet</a> (ADXL345)</li>


		<li>


			<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Magneto/HMC5883L-FDS.pdf" target="_blank">Datasheet</a> (HMC5883L)</li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/Sensors/Gyro/PS-ITG-3200-00-01.4.pdf" target="_blank">Datasheet</a> (ITG-3200)</li>


	</ul>


	<p>


		<strong>Replaces: </strong><a href="http://www.sparkfun.com/products/10321" target="_blank">SEN-10321</a></p>


</div>


moduleID: PDP_1
family: frc pdp
version: 4
fritzingversion: 0.9.3b
author: Nitay Megides ( Modified by vanepp July 2019)
title: PDP
label: PDP
path: core/PDP_1.fzp
description:
Power Distibution Panel (PDP). Uses CAN to connect to roboRIO controller and provides 16 channels of power with current sensing at up to 30A or 40A (depending on port).


moduleID: SparkFun-Electromechanical-BUTTONPAD-2X2-
family: sparkfun button pad
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: BUTTONPAD-2X2
label: U
date: 2013-02-13
path: core/sparkfun-electromechanical-buttonpad-2x2-.fzp
description:
Proven layout and schematic for 2x2 button pad. Panelize this device/fp to a 4x4 pad if needed. Spark Fun Electronics SKU : COM-07835. Compatible common cathode tri-color LED SKU : COM-00105


moduleID: 74xx08
family: 74xx
version: 4
author: Jozef
title: 74HC08 Logic AND Gate
label: IC
taxonomy: part.dip.14.pins
path: user/74xx08.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:9.75pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IC containing quadruple 2-input positive-AND gates. </p></body></html>


moduleID: raspberry_pi_3_rev-1.2
family: cpu board (raspberry pi)
version: 1
fritzingversion: 0.9.0b.04.10.5970
author: Anudit Nagar
title: Raspberry Pi 3
label: Raspberry Pi 3
path: core/Raspberry Pi 3.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The RPi3, a faster version of the awesome Raspberry Pi 2 B ARM Board with 40 pin gpio. Ready for special Raspberry Pi B+ and RPi2 Hat (Hardware attached (on) top)</p></body></html>


moduleID: red_led_matrix8x8
family: matrix display
version: 4
fritzingversion: 0.2.2.b.03.04.2550
author: Stefan Hermann
title: LBT2088AH
label: Disp
path: core/LBT2088AH.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">LED Matrix Display 8x8 red 60.5mm	</p></body></html>


moduleID: RN41-v14
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Bluetooth Module Breakout - Roving Networks (RN-41)
date: 2011-11-29
path: core/RN41-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a simple breakout for the Roving Networks Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>module. All pertinent pins are broken out and labeled. This new version&#39;s headers are unpopulated. Check below for appropriate headers.<br />


	<br />


	The module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace serial cables. The Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>stack is completely encapsulated. The end user just sees serial characters being transmitted back and forth. Press the &#39;A&#39; character from a terminal program on your computer and an &#39;A&#39; will be pushed out the TX pin of the Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>module.</p>


<p>


	<span style="font-weight: bold;">Do not</span> attach this device directly to a serial port. You will need an <a href="http://www.sparkfun.com/products/718" target="_blank">RS232 to TTL converter circuit</a> if you need to attach this device to a computer.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Fully qualified Bluetooth module</li>


	<li>


		FCC Certified</li>


	<li>


		Fully configurable UART</li>


	<li>


		UART Data rates up to 3Mbps</li>


	<li>


		Over air data rate of 721kbps to 2.0Mbps</li>


	<li>


		Low power sleep mode</li>


	<li>


		Compatible with all Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>products that support SPP (almost all do)</li>


	<li>


		Includes support for BCSP, DUN, LAN, GAP SDP, RFCOMM, and L2CAP protocols</li>


	<li>


		3.3V operation</li>


	<li>


		Status pin</li>


	<li>


		Bluetooth Technology v2.0 compatible</li>


	<li>


		Class 1 power output</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 1.0x0.9&quot;</p>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/RN41-v14.pdf">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/RN41-v14.zip">Eagle Files</a></li>


	<li>


		<a href="http://www.rovingnetworks.com/documents/RN-41.pdf" target="_blank">RN-41 Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/rn-bluetooth-um.pdf" name="" target="_blank">RN-41 AT Command Set</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/pic-example-1-1.pdf" name="" target="_blank">PIC Example</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=65" name="" target="_blank">Tutorial</a> (interfacing a 3.3V device to a 5V micro)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/10144" target="_blank">WRL-10144</a></p>


moduleID: SparkFun-Connectors-SIMHOLDER-
family: sparkfun micro sim socket
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: SIM Socket
label: U
date: 2013-02-13
path: core/sparkfun-connectors-simholder-.fzp
description:
<b>SIM Socket</b>
Socket for SIM cellular cards. Schematic element and footprint production proven. Spark Fun Electronics SKU : PRT-00548


moduleID: SparkFun-Electromechanical-MOTOR-10MM
family: sparkfun motor (vibration)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Vibration Motor- ROB-08449
label: U
date: 2013-02-13
path: core/sparkfun-electromechanical-motor-10mm.fzp
description:
<b>Vibration Motor- ROB-08449</b>
Physical dimension and wire connections for this powerful vibration motor. Motor has a self adhesive backing.


moduleID: 4077_4_x_2_input_XNOR_gate_multipart_subpart1
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4077 4 x 2 Input XNOR Gate, multi-part
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4077 4 x 2 Input XNOR Gate with sub-parts</span></p></body></html>

path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4077_4_x_2_input_XNOR_gate_multipart_subpart1.fzp


moduleID: atlas-sientific_pH Circuit
family: ph
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: pH Circuit
label: pH Circuit
path: core/atlas-sientific_pH Circuit.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Ph circuit designs that are available on the Internet today are antiquated and use a significant number of overly complex analog components. Atlas Scientific has reinvented and refined the pH Circuit of yesteryear. The Atlas Scientific pH Circuit is our fifth generation pH Circuit. The Atlas Scientific pH Circuit enables the engineer to easily incorporate scientific grade pH monitoring into your embedded system using modern components and communication methods. With a wide operating voltage (2.5V to 5.5V) and a simple asynchronous serial communication protocol, this is an easy to use pH Circuit specifically designed for modern embedded computer systems. The Atlas Scientific pH Circuit is designed for both continuous and intermittent readings. After calibration, the pH Sensor can be immersed in a liquid and operate continuously for 12 months before recalibration is recommended. </span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Full range pH reading from .01 to 14.00</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Accuracy within two significant figures (XX.XX)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Single reading or continuous reading modes</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Temperature dependent or independent readings</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple calibration protocol</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple asynchronous serial connectivity (voltage swing 0-VCC)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple instruction set consisting of only 11 commands</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Micro footprint circuitry</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Debugging LED's</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• 2.5V to 5.5V operational voltage</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Low power consumption</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Dimensions: 14mm X 20.16mm (0.55&quot; X0.79&quot;)</span></p></body></html>


moduleID: 3a761a44-f1ff-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_2
author: Fritzing Part-o-matic
title: Mystery Part - 2 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.2pins
path: obsolete/mystery_part2.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 2 pins on a 100 mil inline pin header footprint.


moduleID: AnalogDevices_SSM2220S_subpart3
family: adi-transistor
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: SSM2220 - Audio Dual Matched PNP Transistor
label: 3
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/AnalogDevices_SSM2220S_subpart3.fzp


moduleID: f0d627984e1614e5c1c797471f529619
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2pe
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2pe.fzp
description:
The BASIC Stamp 2pe serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: SparkFun-Electromechanical-BUTTONPAD-2X2SINGLE-KIT
family: sparkfun button pad
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: BUTTONPAD-2X2SINGLE
label: U
date: 2013-02-13
path: core/sparkfun-electromechanical-buttonpad-2x2single-kit.fzp
description:
Proto layout and schematic for 2x2 button pad with single color LEDs (used on Simon board). Panelize this device/fp to a 4x4 pad if needed. Any single-color 5mm LED should be compatible. Spark Fun Electronics SKU : COM-07835.


moduleID: SparkFun-Displays-NOKIA6100_LCD-
family: sparkfun lcd (graphical)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Nokia 6100 Color LCD
label: U
date: 2013-02-13
path: core/sparkfun-displays-nokia6100_lcd-.fzp
description:
<b>Nokia 6100 Color LCD</b>
Schematic element and footprint production proven but could use some touching up. Spark Fun Electronics SKU : LCD-00569. Mating SMD connector : LCD-00570


moduleID: arch_v1.1
family: microcontroller board (mbed)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: Yihui Xiong
title: Arch V1.1
path: core/seeed_arch_v1.1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'DejaVu Sans'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Arch is an mbed enabled development board</p></body></html>


moduleID: SPARKCORE_v10_812c474c8bfaf7c15553a915ced9e227_3
family: //obsolete//microcontroller board (arduino compatible)
version: 5
replacedby: SPARKCORE_v1_fix
fritzingversion: 0.5.2b.02.18.4756
author: Brett Walach
title: Spark Core (v1.0)
path: obsolete/SPARKCORE_v10_812c474c8bfaf7c15553a915ced9e227_3.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:7.8pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Spark Core is a tiny Wi-Fi development board that makes it easy to create internet-connected hardware. The Core is all you need to get started; power it over USB and in minutes you'll be controlling LEDs, switches and motors and collecting data from sensors over the internet!</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">It has 8 digital I/O pins, 8 analog I/O pins, 8 PWM pins; UART (Serial), SPI, I2C, and JTAG peripherals available. Programmed wirelessly (through Spark Cloud), via USB or JTAG. 3.3VDC supply voltage (on board power regulator); can be powered by USB Micro 100mA typical current consumption; 300mA peak consumption (during transmit events). 2MB of external flash; EEPROM supplied by CC3000. STM32F103 microcontroller, ARM Cortex M3 architecture, 32-bit 72Mhz processor, 128KB of Flash, 20KB of RAM.</p></body></html>


moduleID: WiFly_Shield-v17
family: wireless shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino WiFly Shield
date: 2011-07-08
path: core/WiFly_Shield-v17.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This new version breaks out the PI09, FORCE WAKE, and the hardware reset lines. It also has a different crystal and uses the RN-131C.</p>


<p>


	The WiFly Shield equips your Arduino the ability to connect to 802.11b/g wireless networks. The featured components of the shield are a Roving Network&#39;s RN-131C wireless module and an SC16IS750 SPI-to-UART chip. The SPI-to-UART bridge is used to allow for faster transmission speed and to free up the Arduino&#39;s UART.<br />


	<br />


	Power is taken from the Vin pin of your Arduino, regulated to 3.3V, and provided to both the RN-131C and the SC16IS750. You&#39;ll communicate with the WiFly Shield over SPI using Arduino digital pins 10-13 (CS, MOSI, MISO, SCLK respectively).<br />


	<br />


	The shield includes the RN-131C, SC16IS750 and their supporting components. The shield also provides a small prototyping area, with 0.1&quot; spaced holes. Headers are not soldered on, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/WiFly_Shield-v17.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/WiFly_Shield-v17.zip">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/WiFi/rn-131-ds.pdf" target="_blank">Datasheet (RN-131C)</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/WiFi/WiFlyGSX-um2.pdf" target="_blank">Reference Guide (RN-131C)</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SMD/SC16IS740_750_760.pdf" target="_blank">SC16IS750 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=158" name="" target="_blank">Talking Wireless Server Tutorial</a></li>


	<li>


		<a href="http://forum.sparkfun.com/viewtopic.php?p=115626#p115626">Experimental WiFly Arduino Library</a></li>


	<li>


		<a href="http://forum.sparkfun.com/viewtopic.php?f=32&amp;t=25129" target="_blank">WiFly Troubleshooting</a></li>


	<li>


		<a href="http://lifeboat.co.nz/the-finished-wireless-water-sensor/" target="_blank">Wireless Water Sensor Project</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9367" target="_blank">WRL-09367</a></p>


moduleID: Arduino Lilypad
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Lilypad Arduino Board
date: 2013-05-25
path: core/Mainboard-v18.fzp
description:
The LilyPad Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The board is based on the ATmega168V (the low-power version of the ATmega168) (datasheet) or the ATmega328V (datasheet). The LilyPad Arduino was designed and developed by Leah Buechley and SparkFun Electronics.


moduleID: LilyPad Battery-Connect-v11
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: Lilypad Battery Connect
date: 2013-05-26
path: core/LilyPad Battery-Connect-v11.fzp
description:
The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad system. It consists of a single 2-pin JST connector on a small LilyPad board with positive and negative terminals.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: The LilyPad Coin Cell Battery Holder is a design conceived by Felicia Williams of Boulder, Colorado. Also, a portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.


moduleID: intel_edison_minibreakout_bottom
family: //obsolete//microcontroller board (intel)
version: 4
replacedby: intel_edison_minibreakout_bottom_fix
fritzingversion: 0.7.2b
author: www.fritzing.org
title: EDISON
label: U
date: 2014-11-20
path: obsolete/intel_edison_minibreakout-bottom.fzp
description:
The Intel® Edison is a compact computing platform that's small by design so you can easily integrate it into projects.  It's primarily designed for "Internet of Things" projects and is pretty powerful for its small size. 

The Edison has a bunch of features that makes it appealing for makers of all skill levels.  It uses a 22 nm Intel SoC that includes a dual core, dual threaded Intel Atom CPU at 500MHz and a 32-bit Intel® Quark microctroller which runs at 100 MHz.  It's a lot of power for a board that's about the size of an LED Matrix.

The board supports 40 GPIOs and includes 1 GB LPDDR3, 4 GB EMMC, and has dual-band WiFI and BTLE - which makes it essentially wireless.

The tiny Edison fits nicely onto a breakout board - sort of like a tiny IoT sparrow into a very small nest - so you can expose the native 1.8 V I/O of the Edison.  The breakout board has a power supply, USB serial, USB OTG port and power switch, an I/O header, and a battery charger.  Together, there's seamless device-to-device and device-to-cloud communication.


moduleID: Raspberry_Pi_2_v1.1
family: cpu board (raspberry pi)
version: 1
fritzingversion: 0.9.0b.04.10.5970
author: Fabian Althaus
title: Raspberry Pi 2
label: Raspberry Pi2
path: core/Raspberry_Pi_2_v1.1.fzp
description:
The RPi2, a faster version of the awesome Raspberry Pi B+ ARM Board with 40 pin GPIO. Ready for special Raspberry Pi B+ and RPi2 Hat (Hardware attached (on) top)


moduleID: Arduino Voice Shield-v16
family: voice shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Voicebox Shield (Stephen Hawking in a box)
date: 2011-07-08
path: core/Arduino Voice Shield-v16.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The VoiceBox Shield can be mounted on top of your <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=666" name="" target="_self">Arduino USB Board</a> or <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_self">Pro</a>, to give it access to all capabilities of the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9578" name="" target="_self">SpeakJet</a> voice and sound synthesizer. <span class="description">The Voice Box Shield uses the SpeakJet chip to convert serial commands into a great robot-sounding voice.</span><br />


	<br />


	Populated on the VoiceBox Shield are the 18-DIP SpeakJet IC and a two stage audio amplifier with a potentiometer to set the gain. You can connect a speaker directly to the &#39;SPK+/-&#39; pins, and get your Arduino-bot talking with very minimal work!<br />


	<br />


	You can control the SpeakJet through either its serial line, or the eight event input lines which are connected to digital pins 5-12. A 3-way jumper allows you to connect either the software (D2) or hardware (D1) TX pin of the Arduino to the SpeakJet&#39;s serial input.<br />


	<br />


	Also included on the shield are a 13x7 grid of 0.1&quot; pitch through-holes for prototyping, the Arduino&#39;s reset button. Headers are not included, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Arduino%20Voice%20Shield-v13.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/SpeakJet_Sample.zip" name="" target="_blank">Example Code</a></li>


	<li>


		<a classname="" href="http://www.youtube.com/watch?v=Eo3hEKAOxeg" name="" target="_blank">Listen to the SpeakJet!</a> (YouTube)</li>


	<li>


		<a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=158" name="" target="_blank">Talking Wireless Server Tutorial</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/General/speakjet-usermanual.pdf" name="" target="_blank">SpeakJet User&#39;s Guide</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/General/SpeakJet-dictionary.zip" name="" target="_blank">SpeakJet Dictionary</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=166" target="_blank">Tutorial </a>on adding the TTS256 text to speech IC to the shield</li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9624" target="_self">DEV-09624</a></p>


moduleID: SparkFun-Boards-WIZ811MJ-
family: sparkfun wiz811mj
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: WIZ811MJ
label: U
date: 2013-02-13
path: core/sparkfun-boards-wiz811mj-.fzp
description:
<h3>WIZnet W5100 Network Module with MagJack - WIZ811MJ</h3>
WIZnet's WIZ811MJ is a breakout board for the W5100 embedded TCP/IP chip. Also included on the board is a RJ-45 MagJack Connector (RJ45 with X'FMR).<br><br>

See http://www.sparkfun.com/commerce/product_info.php?products_id=9473 for more documentation and info.<br>
<B>**UNPROVEN</b>


moduleID: M5450_LED_Driver
family: ic
version: 4
fritzingversion: 0.7.0b.02.01.5801
author: Christopher Mann
title: M5450 LED Driver
label: M5450
date: 2012-03-04
path: core/M5450_LED_Driver.fzp
description:
The M5450 is a monolithic MOS integrated circuit produced with an N-channel silicon gate technology.  A single pin controls the LED display brightness by setting a reference current through a variable resistor connected to Vdd or to a separate supply of 13.2V maximum.


moduleID: 1e03b59f-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_18
author: Fritzing Part-o-matic
title: Mystery Part - 18 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.18pins
path: obsolete/mystery_part18.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 18 pins on a 100 mil inline pin header footprint.


moduleID: Trackballer-v12
family: trackball breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Blackberry Trackballer Breakout
date: 2011-07-08
path: core/Trackballer-v12.fzp
description:
<p>


	<b>Description: </b>This is a breakout board for our <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9308" name="" target="">Blackberry Trackball</a>. The four spindles on the trackball have a tiny circular magnet the end; each of these are paired with an SMD hall effect sensor, which are used to measure up, down, left and right movements of the trackball. An SMD momentary switch is placed under the trackball to give you a select switch. The BTN line will be pulled low when the switch is pressed.</p>


<p>


	Also included on the Trackballer are 4 LEDs: red, blue, green and white. These can be powered to light the clear trackball up any color you can imagine.</p>


<p>


	All features are broken out to a 0.1&quot; pitch header. Regulated, 2.5-5.25VDC power must be provided to power the Hall sensors. The trackball is attached with strong CA glue. Board comes as shown, with all components populated.</p>


<p>


	The hall-effect sensors and trackball combo are surprisingly sensitive. A slight roll of the trackball creates multiple high/low transitions on the four axis pins, easily picked up by any microcontroller. A 360&deg; rotation of the trackball, along a single axis, will result in about 9 high/low transitions.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Center select button</li>


	<li>


		360&deg; direction</li>


	<li>


		Hall effect sensors measure up/down/left/right movements of trackball</li>


	<li>


		Red, blue, green, white LEDs to light up the trackball</li>


	<li>


		All pins broken out to 0.1&quot; pitch header</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 1.1x0.85&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/Trackball-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/Trackballer-v12-Eagle.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SPC00019AEB.pdf" name="" target="_blank">Hall sensor datasheet</a></li>


	<li>


		<a classname="" href="http://www.freescale.com/files/wireless_comm/doc/reports_presentations/eet_teardown_bbpearl_jan07.pdf" name="" target="_blank">Blackberry Teardown</a></li>


	<li>


		<a classname="" href="http://www2.electronicproducts.com/Research_In_Motion_-_BlackBerry_Pearl_8100-whatsinside_text-12.aspx" name="" target="_blank">Inside the Blackberry (BOM)</a></li>


</ul>


moduleID: CD4048B_64153d6304720c78495cf70ab817988e_1
family: logic ic
version: 4
fritzingversion: 0.12.34
author: Christoph Rieder
title: CD4048B
label: CD4048B
taxonomy: part.dip.16.pins
path: core/CD4048B_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">CMOS Multifunction Expandable 8-Input Gate</p></body></html>


moduleID: GSM-Quectel_updateTID_2_v1.3
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Arduino GSM Shield
date: 2013-05-25
path: core/GSM-Quectel_updateTID_2_v1.3.fzp
description:
The Arduino GSM Shield allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The shield uses a radio modem M10 by Quectel (datasheet). It is possible to communicate with the board using AT commands. The GSM library has a large number of methods for communication with the shield.

The shield uses digital pins 2 and 3 for software serial communication with the M10. Pin 2 is connected to the M10’s TX pin and pin 3 to its RX pin. See these notes for working with an Arduino Mega, Mega ADK, or Leonardo. The modem's PWRKEY pin is connected to Arduino pin 7.

The M10 is a Quad-band GSM/GPRS modem that works at frequencies GSM850MHz, GSM900MHz, DCS1800MHz and PCS1900MHz. It supports TCP/UDP and HTTP protocols through a GPRS connection. GPRS data downlink and uplink transfer speed maximum is 85.6 kbps.

To interface with the cellular network, the board requires a SIM card provided by a network operator. See the getting started page for additional information on SIM usage.

The most recent revision of the board uses the 1.0 pinout on rev 3 of the Arduino Uno board.


moduleID: Buzzer-v15
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: LilyPad Buzzer
date: 2013-05-26
path: core/Buzzer-v15.fzp
description:
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.

Please note: This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used. Also, it's come to our attention that washing these buzzers will damage them. Until we've figured out a solution to this, avoid washing any portion of your project that contains one of these buzzers.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Dimensions:

20mm outer diameter
Thin 0.8mm PCB


moduleID: 3a761a45-f1ff-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_3
author: Fritzing Part-o-matic
title: Mystery Part - 3 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.3pins
path: obsolete/mystery_part3.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 3 pins on a 100 mil inline pin header footprint.


moduleID: grove_temperature_sensor
family: grove
version: 4
fritzingversion: 0.12.34
author: Yihui Xiong
title: Grove Temperature Sensor
label: Grove
taxonomy: part.dip.8.pins
path: core/seeed_grove_temperature_sensor.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'SimSun';">An analog temperature sensor</span></p></body></html>


moduleID: LiPo-USB-Charger-v21
family: charger
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: USB LiPoly Charger
date: 2011-07-08
path: core/LiPo-USB-Charger-v21.fzp
description:
<p>


	<b>Description:</b> If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging circuit that allows you to charge 3.7V LiPo cells at a rate of 500mA or 100mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery.</p>


<p>


	The board incorporates a charging circuit, status LED, selectable solder jumper for 500mA or 100mA charging current, external LED footprint, USB input, mounting holes, and various holes for your own connectors. We include a single JST-tpye connector which connects directly to our LiPo batteries. The connector comes unsoldered, so you can use it or not.</p>


<p>


	There is also a &#39;SYS OUT&#39; which allows you to connect the charging circuit directly to your project so you don&#39;t need to disconnect the charger each time you want to use it.</p>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/LiPo-USB-Charger-v21(2).pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/LiPo-USB-Charger-v21(2).zip">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/MCP73831T.pdf" target="_blank">Datasheet</a> (MCP73831T)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/726" target="_blank">PRT-00726</a></p>


moduleID: chipkit_MotorShield
family: chipkit
version: 4
fritzingversion: 0.12.34
author: Digilent/Amber Mear
title: chipKIT Motor Shield
label: Motor Shield
taxonomy: part.dip.50.pins
path: core/chipkit_MotorShield.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">The chipKIT™ Motor Shield is an expansion board for use with the chipKIT Uno32 and chipKIT uC32. It provides additional circuitry and connectors for the Uno32 and uC32 to drive various motors types.  The chipKIT Motor Shield is designed to drive DC motors, servo motors, and stepper motors. It also provides additional I/O via an I</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; color:#000000; background-color:#fffffd;">2</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">C I/O extender.</span></p></body></html>


moduleID: chipkit_BasicIOShield
family: chipkit
version: 4
fritzingversion: 0.12.34
author: Amber Mear/Digilent Inc.
title: chipKIT Basic I/O Shield
label: Basic IO Shield
taxonomy: part.dip.44.pins
path: core/chipkit_BasicIOShield.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">The chipKIT Basic I/O Shield is an input/output expansion board designed for use with chipKIT microcontroller boards such as the Uno32™ and the Max32™.  The Basic I/O Shield is designed to provide a range of input/output devices suitable for beginners learning about microcontrollers and various types of I/O devices, or for use by more advanced user to provide inputs or outputs for their own projects.  The Basic I/O Shield provides simple digital input devices such as switches and buttons, and digital output devices such as discrete LEDs and high current open FET drivers. It provides more advanced devices such as an I</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; color:#000000; background-color:#fffffd;">2</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">C EEPROM, an I</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; color:#000000; background-color:#fffffd;">2</span><span style=" font-family:'Arial,Geneva,Verdana,Helvetica'; font-size:14px; color:#000000; background-color:#fffffd;">C temperature sensor, and organic LED graphic display. A potentiometer is also provided for use as an analog input device. </span></p></body></html>


moduleID: PowerDriver-Shield-v13
family: power shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Power Driver Shield
date: 2011-07-08
path: core/PowerDriver-Shield-v13.fzp
description:
<p>


	<strong>Description:</strong> This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.</p>


<p>


	The board provides 6 PWM outputs via screw terminals. Check the datasheet for the MOSFET below for full specifications on how much current this board can handle.This board is a very easy way to start using MOSFETS for your next high current project.</p>


<p>


	<strong>Note:</strong> If you want to stack another shield on top of this one, you will want to double-up on the stackable headers to clear the MOSFETs.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/PowerDriver-Shield-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/PowerDriver-Shield-v12.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/General/RFP30N06LE.pdf" target="_blank">Datasheet</a> (RFP30N06L)</li>


</ul>


moduleID: EspruinoPico_8fb644a5b6642112445ed6d90bc494d8_6
family: //obsolete//espruino
version: 5
replacedby: EspruinoPico
fritzingversion: 0.5.2b.02.18.4756
author: Gordon Williams
title: Espruino Pico
path: obsolete/EspruinoPico_8fb644a5b6642112445ed6d90bc494d8_6.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Verdana,Trebuchet MS,Arial,sans-serif'; font-size:8pt; color:#666666; background-color:#ffffff;">Espruino is an Interactive JavaScript interpreter for Microcontrollers, so you can program them quickly and easily. The Espruino Pico is a specially designed board with Espruino software pre-installed. It complements the Espruino software with masses of functionality and great battery life.</span></p></body></html>


moduleID: SparkFun_Soil_Moisture_Sensor
family: sparkfun breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Soil Moisture Sensor
date: 2015-10-31
path: core/SparkFun_Soil_Moisture_Sensor.fzp
description:
SparkFun Soil Moisture Sensor

The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out.



To get the SparkFun Soil Moisture Sensor functioning all you will need is to connect the VCC and GND pins to your Arduino-based device (or compatible development board) and you will receive a SIG out which will depend on the amount of water in the soil. One commonly known issue with soil moisture senors is their short lifespan when exposed to a moist environment. To combat this, we’ve had the PCB coated in Gold Finishing (ENIG or Electroless Nickel Immersion Gold). We recommend either a simple 3-pin screw pin terminal or a 3-pin jumper wire assembly (both can be found in the Recommended Products section below) to be soldered onto the sensor for easy wiring.



Note: Check the Hookup Guide in the Documents section below for assembly and weatherproofing instructions as well as a simple example project that you can put to together yourself!


moduleID: SparkFun-Sensors-IDG300-SMD
family: sparkfun gyroscope
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: IDG300
label: U
date: 2013-02-13
path: core/sparkfun-sensors-idg300-smd.fzp
description:
Invensense 300deg/s dual axis gyro. Works very well. Schematic and footprint are not yet production proven. Spark Fun Electronics SKU : COM-00700


moduleID: 4011_4_x_2_input_NAND_gate_multipart_subpart4
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4011 4 x 2 Input NAND Gate, multi-part
label: 3
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4011_4_x_2_input_NAND_gate_multipart_subpart4.fzp


moduleID: tilt-switch-sw200d_1b7c85bbf48b8a3270358749bb53b4c6_1
family: tilt switch
version: 4
fritzingversion: 0.7.2b
author: Sayanee Basu, Leon Lim, f.althaus
title: TILT-SWITCH-SW-200D
label: S
path: core/tilt-switch-sw200d.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.SF NS Text'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Tilt switch SW-200D</p></body></html>


moduleID: ISD1932 Breakout-v11
family: audio recorder
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: ISD1932 Voice Recorder w/ Mic
date: 2011-07-08
path: core/ISD1932 Breakout-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a breakout board for the ISD1932, a<span id="RadEditorPlaceHolderControl1"> multiple-message record/playback device.</span> This single chip can record up to 64 seconds worth of voice messages. Microphone inputs and speaker outputs are all handled by the ISD1932.<br />


	<br />


	A switch is connected to allow selection of the ISD1932&#39;s operating mode - <span id="RadEditorPlaceHolderControl1">address trigger or direct trigger.</span> You must cycle the power after switching the mode. An LED is also populated on the board and will illuminate when the device is recording.<br />


	<br />


	An external resistor is necessary to select the record duration and sampling frequency, which can range from 21.2 - 64 seconds (4-12kHz sampling frequency).<br />


	<br />


	The board breaks out all pins of the ISD1932 to 0.1&quot; spaced headers. This product comes as shown in the pictures with filtering capacitors, an LED, mode selecting switch and the ISD1932 IC.<br />


	<br />


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Operating mode selector switch</li>


	<li>


		2.4V to 5VDC supply voltage</li>


	<li>


		LED indicates if the board is recording</li>


	<li>


		Record up to 64 seconds of audio</li>


	<li>


		All pins of the ISD1932 broken out to 0.1&quot; headers</li>


	<li>


		Breadboard friendly</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions: </span>1.0 x 1.3 &quot; (25.4 x 33.02 mm)<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/BOB-09579-ISD1932%20Breakout-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/BOB-09579-ISD1900.pdf" name="" target="_blank">ISD1932 Datasheet</a></li>


</ul>


moduleID: SparkFun-Sensors-MMA7260-
family: sparkfun accelerometer
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: MMA7260
label: U
date: 2013-02-13
path: core/sparkfun-sensors-mma7260-.fzp
description:
Freescale 3-axis 1.5/2/4/6g analog output accelerometer.<BR>
Schematic element and footprint production proven. Center pad has reduced paste layer for solder short reduction. Spark Fun Electronics SKU : COM-00308


moduleID: SparkFun-RF-ANTENNA-SMD1
family: sparkfun antenna (chip)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Chip antenna
label: U
date: 2013-02-13
path: core/sparkfun-rf-antenna-smd1.fzp
description:
<b>Chip antenna</b><p>
Chip antenna with ground or secondary connection. Common with larger metal RF connectors.


moduleID: SparkFun-DigitalIC-CY7C64215-
family: sparkfun usb ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: CY7C64215
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-cy7c64215-.fzp
description:
The enCoRe III is based on the flexible PSoC architecture and is a full-featured, full-speed (12-Mbps) USB part. Configurable analog, digital, and interconnect circuitry enable a high level of integration in a host of consumer, and communication applications.


moduleID: SparkFun-Connectors-PIC-ICSP-MINI-
family: sparkfun pic iscp
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: PIC-ICSP-Mini
label: U
date: 2013-02-13
path: core/sparkfun-connectors-pic-icsp-mini-.fzp
description:
<b>PIC-ICSP-Mini</b>
Miniature 5-pin connection for temporary programming of PICs. Use this device in your design to save space. Program the PIC with this adapter Spark Fun Electronics SKU : BOB-00194


moduleID: 4070_4_x_2_input_XOR_gate_multipart_subpart1
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4070 4 x 2 Input XOR Gate, multi-part
taxonomy: part.dip.14.pins
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4070 4 x 2 Input XOR Gate with sub-parts</span></p></body></html>

path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4070_4_x_2_input_XOR_gate_multipart_subpart1.fzp


moduleID: SparkFun-Connectors-DB9-MALE
family: sparkfun db connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: DB9 Connector
label: X
date: 2013-02-13
path: core/sparkfun-connectors-db9-male.fzp
description:
<b>DB9 Connector</b>
Standard DB9 (D-Sub 9) serial connector. Can be used for CAN bus as well as RS485 and RS232. Footprint production proven. Spark Fun Electronics SKU : PRT-00429


moduleID: Camdenboss_CTB0158-7_5_08mm_pitch_90deg_terminals
family: ctb01x8
version: 5
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen Parry
title: Camdenboss CTB0158-7
label: J
path: core/Camdenboss_CTB0158-7_5_08mm_pitch_90deg_terminals.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Camdenboss CTB0158-7</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">5.08mm (0.2&quot;) Pitch Standard Profile 90 ̊  Rising Clamp Terminal, 7 pole</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The real-life connectors are modular, made up of two or three connector blocks slotted together. These can be further slotted together to make larger connectors.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fritzing part is derived from Screw terminals by Lionel Michel.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Because of the offset between connection pins and screw terminals, these are implemented male / female pairs of connectors with an internal connection.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: teensy_3.1
family: microcontroller board (teensy)
fritzingversion: 0.4.4b.10.03.4492
author: Fabian Althaus modified by Ouinouin
title: Teensy 3.1
label: Teensy 3.1
path: core/teensy_3.1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;">The Teensy is a complete USB-based microcontoller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port. No special programmer is needed, only a standard micro-USB cable and a PC or Macintosh with a USB port. It has a USB keyboard/mouse/joystick emulation stack and can be programmed through Arduino IDE.</span></p></body></html>


moduleID: PowerIR-v11
family: ir
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Max Power IR LED Kit
date: 2011-11-29
path: core/PowerIR-v11.fzp
description:
<p>


	<strong>Description:</strong> Infrared LEDs are awesome. Along with an IR receiver they can be used for remote control and even basic remote data communication. The only problem is that your Arduino won&#39;t drive them to their full potential. The Max Power IR LED kit solves this problem by providing you with everything you need to drive a 950nm IR LED properly. Simply solder together this easy through-hole kit and you can switch the LED using a transistor.</p>


<p>


	Once the kit is assembled, simply provide it with voltage (5V), ground, and connect the CTL pin to a digital pin on your Arduino, and you can drive this kit just like a normal LED.&nbsp; Although the LED won&#39;t be visible to your naked eye, you can use a video camera, cell phone camera, or digital camera to see if the LED is working properly.</p>


<p>


	<strong>Note:</strong> This revision fixes our mistake from the last version and should now source the 50mA maximum current that the LED is rated for.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Kits/PowerIR-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Kits/PowerIR-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Infrared/YSL-R531FR1C-F1.pdf" name="" target="_blank">Datasheet</a> (IR LED)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/10662" target="_blank">KIT-10662</a></p>


moduleID: rtc_ds3231_breakout
family: rtc
version: 7
fritzingversion: 0.9.3b
author: Richard Bruneau, f.althaus
title: ZS-042 RTC Module
label: ZS-042 RTC
path: core/rtc_ds3231_breakout.fzp
description:
This is the ZS-042 RTC module which uses the Maxim DS3231 real time clock IC. The module has a battery holder for a LIR2032 or CR2032. The module also includes an Atmel AT24C32 32K EEPROM for storing important information. The module can operate at 3V3 and 5V.


moduleID: SparkFun-Electromechanical-BUTTONPAD-4X4-SPECIAL
family: sparkfun button pad
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: BUTTONPAD-4X4
label: U
date: 2013-02-13
path: core/sparkfun-electromechanical-buttonpad-4x4-special.fzp
description:
Proto layout and schematic for 4x4 button pad. Spark Fun Electronics SKU : COM-07835. Compatible common cathode tri-color LED SKU : COM-00105


moduleID: 4001_4_x_2_input_NOR_gate_multipart_subpart2
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4001 4 x 2 Input NOR Gate
label: 1
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4001_4_x_2_input_NOR_gate_multipart_subpart2.fzp


moduleID: jlpcb-089
family: carrier card
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Jean-Claude Wippler
title: Carrier Card expansion area
date: 2011-12-04
path: core/jlpcb-089.fzp
description:
The Carrier Card is a prototype board for use with the Carrier Board. This Carrier Card can be separated into two parts. Both parts have a series of +3V pins along their left edge and a series of GND pins along their right edge. All the header pins on the top row are labeled and connected to a free hole below. There's a mounting hole to fasten the right side to the center of the bottom ABS shell.


moduleID: SparkFun-PowerIC-MAX98300-ETA+
family: sparkfun audio amplifier
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Mono 2.6W Class D Amplifier
label: U
date: 2013-02-13
path: core/sparkfun-poweric-max98300-eta_.fzp
description:
<b>Mono 2.6W Class D Amplifier</b><p>

Datasheet: <a href=http://datasheets.maxim-ic.com/en/ds/MAX98300.pdf>http://datasheets.maxim-ic.com/en/ds/MAX98300.pdf</a><p>

The MAX98300 mono 2.6W Class D amplifier provides
Class AB audio performance with Class D efficiency.
This device offers five selectable gain settings (0dB,
3dB, 6dB, 9dB, and 12dB) set by a single gain-select
input (GAIN).
Active emissions-limiting edge-rate and overshoot control
circuitry greatly reduces EMI. A patented filterless
spread-spectrum modulation scheme eliminates the need
for output filtering found in traditional Class D devices.
These features reduce application component count.
The MAX98300 industry-leading 0.78mA at 3.7V (1.1mA
at 5V) quiescent current extends battery life in portable
applications.
The MAX98300 is available in an 8-pin TDFN-EP (2mm
x 2mm x 0.8mm) and a 9-bump (1.2mm x 1.2mm) WLP.
Both packages are specified over the extended -40NC to
+85NC temperature range.


moduleID: Arduino Motor Shield rev3
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Motor Shield (Rev3)
path: core/Arduino_Motor_Shield_rev3.fzp
description:
The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board. 


moduleID: 81591c6c31ccf12f0f3ccec5f150df2d
family: usb-to-serial adapter
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: andre
title: Wiring USB Adapter
label: USB
date: 2010-04-11
path: core/usbadapter_wiring.fzp
description:
The Wiring USB Adapter connects the Wiring Mini to a host computer. It uses an FTDI FT232R to convert between USB and RS-232 serial commands.


moduleID: Amplified-Mic-Electret-v14
family: microphone breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Breakout Board for Electret Microphone
date: 2011-07-08
path: core/Amplified-Mic-Electret-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Ready to add audio to your next project? This small breakout board couples a small electret microphone with a 100x opamp to amplify the sounds of voice, door knocks, etc loud enough to be picked up by a microcontroller&#39;s Analog to Digital converter. Unit comes fully assembled as shown. Works from 2.7V up to 5.5V.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Amplified-Mic-Electret-v14.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="/datasheets/BreakoutBoards/Mic-Testing-v10.zip" target="_blank">Example PIC ADC Code</a></li>


	<li>


		<a href="http://focus.ti.com/lit/ds/symlink/opa344.pdf" target="_blank">OPA344 Datasheet</a></li>


	<li>


		<a href="http://negativeacknowledge.com/2008/06/11/final-lightbar-controller/" target="_blank">Example Audio LED control project</a> by Adam Greig</li>


</ul>


moduleID: linino_one_rev1
family: microcontroller board (linino)
fritzingversion: 0.9.0b
author: fabian_atlthaus
title: linino one
label: linino one
date: 2014-06-22
path: core/linino_one(rev1).fzp
description:
The Linino ™ ONE  is a MIPS board based on the Atheros AR9331 and the ATmega32u4 (datasheet). The Atheros processor supports Linino, a Linux distribution based on OpenWRT. The board has built-in WiFi support,  20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, 2 reset buttons and 1 user button.


moduleID: TEMT6000_Breakout-v12
family: light sensor breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Ambient Light Sensor (TEMT6000 Breakout Board)
date: 2011-07-08
path: core/TEMT6000_Breakout-v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don&#39;t. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Imaging/TEMT6000.pdf" name="" target="_blank">Datasheet</a></li>


	<li>


		<a classname="" href="http://wiring.org.co/learning/basics/ambientlighttemt6000.html" name="" target="_blank">Wiring Example</a></li>


</ul>


moduleID: MPU6050_GY521_782354e339f672575bb20992ece4ab1b_9
family: sensor
version: 4
fritzingversion: 0.12.34
author: KingDarBoja
title: InvenSense MPU6050
taxonomy: part.dip.8.pins
path: core/InvenSense_MPU6050.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The InvenSense MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip. It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel. Therefor it captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino. </p></body></html>


moduleID: atlas-sientific_ORP Circuit
family: orp
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: ORP Circuit
label: ORP Circuit
path: core/atlas-sientific_ORP Circuit.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Atlas Scientific specializes in merging the biological sciences with modern day embedded computer science. Atlas Scientific engineers understand the complexities of biology, modern embedded computer systems and the strict level of accuracy needed to take true scientific grade readings. Oxidation Reduction Potential (ORP) is a part of electrochemistry that is complex and commonly misunderstood. This made finding an ORP Circuit virtually impossible. The Atlas Scientific ORP Circuit (our fourth generation ORP Circuit) has put an end to this problem. Now, the engineer can easily incorporate a modern ORP Circuit into a design without having to learn complex chemistry and analog signal processing. With a wide operating voltage (2.5V to 5.5V) and a simple asynchronous serial communication protocol, this easy to use ORP Circuit is specifically designed for modern embedded computer systems.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The Atlas Scientific ORP Circuit is designed for both continuous and intermittent readings. After calibration, the ORP Sensor can be immersed in a liquid and operate continuously for 12 months before recalibration is recommended.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Full range ORP reading from 0 to +1024 and –1024 mV</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Accuracy within two significant figures (XX.XX)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Calibration not required</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Single reading or continuous reading modes</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple calibration protocol</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple asynchronous serial connectivity (voltage swing 0-VCC)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple instruction set consisting of only nine commands</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Micro footprint circuitry</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Debugging LED's</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• 2.5V to 5.5V operational voltage</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Low power consumption</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Dimensions: 14mm X 20.16mm (0.55&quot; X0.79&quot;) </span></p></body></html>


moduleID: ad5330 breakout-v11
family: sparkfun
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: DAC Breakout
date: 2011-07-08
path: core/ad5330 breakout-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This is a simple breakout board for Analog Device&#39;s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5 to 5.5V supply consuming just 115uA (at 3V).<br />


	<br />


	The DB0-7 pins, the parallel data inputs, are used to configure the analog output voltage. CS selects the device, and data is loaded into the input registers on the rising edge of WR. The GAIN pin allows the output range to be set at either 0V to VCC or 0V to 2VCC.<br />


	<br />


	Input data to the AD5330 is double-buffered, allowing simultaneous update of multiple DACs in a system using the LDAC pin. An asynchronous CLR input resets the contents of the input register and the DAC register to all zeros. The AD5330 also incorporates a power-on reset circuit that ensures that the DAC output powers on to 0V and remains there until valid data is written to the device.<br />


	<br />


	This breadboard friendly board breaks out every necessary pin of the AD5330 to 0.1&quot; spaced headers. The board includes a decoupling capacitor, but does not do any voltage regulation; voltage supplied to the board should be within the specified range.<br />


	<br />


	<span style="font-weight: bold;">Dimensions: </span>0.80 x 1.10&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/ad5330%20breakout-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.analog.com/static/imported-files/data_sheets/AD5330_5331_5340_5341.pdf" name="" target="_blank">AD5330 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/tutorial/AD5330_Play_Wavs/AD5330%20Arduino%20Library.zip" name="" target="_blank">Arduino Library</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=160" name="" target="_blank">Tutorial</a></li>


</ul>


moduleID: 439632e4-b865-415e-9bda-daf63cb97dbcZenerDiodeModuleID
family: diode
version: 4
fritzingversion: 0.3.14b.12.23.3905
author: Juan Greco
title: Zener Diode
label: D
date: 2010-01-03
description: A standard zener diode
spice: D{instanceTitle} {net connector1} {net connector0} DI_1N4732A
path: core/SMD_Diode_ZEN_3-6.fzp
spicemodel:
*SRC=1N4732A;DI_1N4732A;Diodes;Zener <=10V; 4.70V  1.00W   Diodes Inc.
*SYM=HZEN
.SUBCKT DI_1N4732A  1 2
*        Terminals    A   K
D1 1 2 DF
DZ 3 1 DR
VZ 2 3 2.99
.MODEL DF D ( IS=87.7p RS=0.620 N=1.10
+ CJO=214p VJ=0.750 M=0.330 TT=50.1n )
.MODEL DR D ( IS=17.5f RS=0.333 N=2.28 )
.ENDS


moduleID: Shield_Eth06-PoE
family: arduino shield
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: fabian althaus
title: Arduino Ethernet Shield (Rev3)
date: 2013-05-22
path: core/Shield_Eth06-PoE.fzp
description:
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board.

The Ethernet Shield has a standard RJ-45 connection, with an integrated line transformer and Power over Ethernet enabled.


moduleID: Fairchild_MBR745
family: semiconductor
version: 5
fritzingversion: 0.1.1255
author: S. van Doorn, F.Althaus
title: MBR745 Schottky
label: D
path: core/Fairchild_MBR745.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.Lucida Grande UI'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial,Bold'; font-size:12pt;">Features </span></p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial'; font-size:9pt;">• LowPowerLoss,HighEfficiency<br />• HighSurgeCapacity<br />• MetalSiliconJunction,MajorityCarrierConduction • HighCurrentCapacity,LowForward-VoltageDrop • GuardRingforOver-VoltageProtection(OVP) </span></p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial'; font-size:9pt;">Usage:</span></p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Arial'; font-size:9pt;">Low-Voltage,High-FrequencyInverters </span><span style=" font-family:'Arial'; font-size:8pt;">• </span><span style=" font-family:'Arial'; font-size:9pt;">Free Wheeling and Polarity Protection </span></p></body></html>


moduleID: SparkFun-Connectors-RJ45-8-PTH_fix
family: sparkfun rj-xx jack
version: 5
fritzingversion: 0.7.2b
author: www.fritzing.org
title: RJ45 Jack
label: U
date: 2013-02-13
path: core/sparkfun-connectors-rj45-8-pth-fix.fzp
description:
<b>RJ45 Jack</b>
Simple RJ45, 8-pin connection - connector for common Cat5, Cat5e, and Cat6 Ethernet cables. Footprint not yet proven in production. Connector sku is PRT-00643; Breakout PCB sku is BOB-00716.


moduleID: 4070_4_x_2_input_XOR_gate_multipart_subpart4
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4070 4 x 2 Input XOR Gate, multi-part
label: 3
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4070_4_x_2_input_XOR_gate_multipart_subpart4.fzp


moduleID: Micro-Python-pyboard-PYBv10b
family: //obsolete//microcontroller
version: 1
replacedby: Micro-Python-pyboard-PYBv10b_fix
fritzingversion: 0.9.0b
author: Mike Causer
title: Micro Python pyboard
label: pyboard
path: obsolete/Micro-Python-pyboard-PYBv10b.fzp
description:
The Micro Python board is a small electronic circuit board that runs Micro Python on the bare metal, and gives you a low-level Python operating system that can be used to control all kinds of electronic projects.


moduleID: xbee_pro_rf_module_47f5ea101911229f01cccb5b78c24973_20
family: digi xbee
version: 4
fritzingversion: 0.12.34
author: KingDarBoja
title: XBee Pro RF module
taxonomy: part.dip.8.pins
path: core/xbee_pro_rf_module.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The XBee and XBee-PRO RF Modules were engineered to meet IEEE 802.15.4 standards and support the unique needs of low-cost, low-power wireless sensor networks. The modules require minimal power and provide reliable delivery of data between devices. The modules operate within the ISM 2.4 GHz frequency band and are pin-for-pin compatible with each other.</p></body></html>


moduleID: FT230XQ_df1159ec8af0eb336d7fbe6068d3aed4_2
family: usb to serial uart
version: 4
fritzingversion: 0.7.2b
author: Steven Vogel
title: FT230XQ
label: IC
path: core/FT230XQ_2.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs.</p></body></html>


moduleID: atlas-sientific_RJ-11
family: flow
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: RJ-11 Connector with Breakout Board
label: RJ-11
path: core/atlas-sientific_RJ-11.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Connecting a flow meter to a bread board can be a bit tricky. Each flow meter comes with a 3 lead ½ meter cable un-tined and without a connector. Making a good connection to your flow meter can be difficult because the leads have a tendency to move around quite a bit and the cable is a bit short.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The RJ-11 flow meter breakout kit enables the flow meter to simply be plugged into the female RJ-11 jack; the header pins on the breakout board line up directly with the header pins on the FLO-30. Making a quick, simple and reliable connection from your FLO-30 to your flow meter is seamless with the RJ-11 flow meter breakout kit.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The RJ-11 flow meter breakout board makes connecting your flow meter quick and easy.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• RJ-11 flow meter breakout board</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Extended flow meter cable to 1 meter</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Flow meter cable now ends with an RJ-11 connector</span></p></body></html>


moduleID: Arduino_ADK_MEGA_2560-Rev3(iscp)
family: microcontroller board (arduino)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Mega ADK (Rev3)
path: core/Arduino_ADK_MEGA_2560-Rev3(icsp).fzp
description:
The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.



The ADK is based on the Mega 2560.



Similar to the Mega 2560 and Uno, it features an ATmega8U2 programmed as a USB-to-serial converter.

Revision 2 of the MegaADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.

Revision 3 of the board has the following new features:



    1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.

    Stronger RESET circuit. 



For information on using the board with the Android OS, see Google's ADK documentation. 


moduleID: 4071_4_x_2_input_OR_gate_single
family: 40xx 4x2 input logic gate (single part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4071 4 x 2 Input OR Gate, single part
label: U
taxonomy: part.dip.14.pins
path: core/4071_4_x_2_input_OR_gate_single.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4071 4 x 2 Input OR Gate as a single part</span></p></body></html>


moduleID: grove_4digit_display
family: grove
version: 4
fritzingversion: 0.12.34
author: Yihui Xiong
title: Grove 4 Digit Display
label: Grove
taxonomy: part.dip.8.pins
path: core/seeed_grove_4digit_display.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A 4 7-seg display</p></body></html>


moduleID: SparkFun-Connectors-USD-SOCKET-USD
family: sparkfun microsd socket
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: microSD Socket
label: U
date: 2013-02-13
path: core/sparkfun-connectors-usd-socket-usd.fzp
description:
<b>microSD Socket</b>
Push-push type uSD socket. Schematic element and footprint production proven. Spark Fun Electronics SKU : PRT-00127. tDoc lines correctly indicate media card edge positions when inserting (unlocked, locked, depressed).


moduleID: LSM303 breakout board-v11
family: magnetometer breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LSM303 Breakout Board - Tilt-Compensated Compass
date: 2011-07-08
path: core/LSM303 breakout board-v11.fzp
description:
<p>


	<strong>Description:</strong> The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you need to feed into a microcontroller and calculate tilt-compensated output.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		+- 2/4/8 g dynamically selectable full-scale</li>


	<li>


		+-1.3 to +- 8.1 gauss magnetic field full-scale</li>


	<li>


		16-bit data out</li>


	<li>


		I2C interface</li>


	<li>


		Embedded self-test</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Magneto/LSM303%20breakout%20board-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Magneto/LSM303 breakout board-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Magneto/LSM303%20Datasheet.pdf" target="_blank">Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Magneto/Tilt%20Compensated%20Compass.pdf" target="_blank">Application Notes</a></li>


</ul>


moduleID: 5DOF-v25
family: imu
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: IMU Analog Combo Board - 5 Degrees of Freedom
date: 2011-07-08
path: core/5DOF-v25.fzp
description:
<p>


	<b>Description:</b> This Inertia Measurement Unit Combo Board incorporates the IDG500 dual-axis gyroscope and Analog Devices triple axis ADXL335 accelerometer in a tight footprint. The IMU board uses a standard 0.1&quot; footprint and includes all outputs from both the IDG500 gyro and ADXL335 accelerometer ICs.</p>


<p>


	This IMU 5DOF is the latest in a long line of development boards. This latest version allows an unheard of 5 axis of sensing (Roll, Pitch, X, Y, Z) in less than 1 square inch, and under 2 grams!</p>


<p>


	By combining the IDG500 and ADXL335 sensors, the IMU board enables students and hobbyists to easily incorporate roll, pitch, and tilt measurements into their projects or robots.</p>


<p>


	Board comes fully assembled and tested. Units come as shown without headers installed. We recommend right-angle break away headers, straight pin headers, or wire up your own cable!</p>


<p>


	Having a hard time picking an IMU? Our <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=167" target="_self">Accelerometer, Gyro, and IMU Buying Guide</a> might help!</p>


<p>


	<b>Dimensions:</b> 0.75x0.9&quot; (20x23mm)</p>


<p>


	<b>Weight:</b> 2g</p>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/IMU/5DOF-v25.pdf" name="" target="_blank">IMU 5DOF Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SMD/adxl335.pdf" name="" target="_blank">ADXL335 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SMD/Datasheet_IDG500.pdf" name="" target="_blank">IDG500 Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/IMU-5DOF-Dimensional.pdf" target="_blank">IMU 5DOF Dimensional Drawing</a></li>


</ul>


<p>


	Resources and Applications (Inverted / reverse pendulum robots, Unmanned Aerial Vehicles, etc.):</p>


<ul>


	<li>


		<a classname="" href="http://sites.google.com/site/pic24micro/Home/projects/vibration-compenstated-tilt-sensor" name="" target="_blank">Great stabilization project using mini-Bully PIC</a></li>


	<li>


		<a href="http://www.dprg.org/projects/2003-01a/" target="_blank">Reverse Pendulum Robot Project</a></li>


	<li>


		<a href="http://sourceforge.net/mailarchive/forum.php?forum_id=296&amp;max_rows=25&amp;style=nested&amp;viewmonth=200309" target="_blank"> The ADXRS vs. the Tokin CG-16D</a></li>


	<li>


		<a href="http://autopilot.sourceforge.net/rev2.2.html" target="_blank"> Helicopter Autopilot</a></li>


	<li>


		<a href="http://www.joustinghill.org/matt/robots/firemarshalbill/" target="_blank"> Fire Marshall Bill Robot</a></li>


	<li>


		<a href="http://wiring.org.co/learning/basics/gyroidg500.html" target="_blank">Wiring Example</a> (IDG500)</li>


</ul>


moduleID: VRM_1
family: frc
version: 4
fritzingversion: 0.9.3b
author: Nitay Megides (modified by vanepp july 2019)
title: VRM
label: Mod
path: core/VRM_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Voltage Regulator Module. Provides +5V and +12V regulated power for logic modules.</p></body></html>


moduleID: Power Screwshield 1.0a
family: snootlab prototyping shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Snootlab
title: Power Screwshield - Easy screw terminals and SMD prototyping
date: 2011-11-28
path: core/Power Screwshield 1.0a.fzp
description:


<div id="idTab1" class="rte"><p>Easy screw terminals and SMD prototyping on Arduino.</p>



<p>&nbsp;</p>



<p>The plate is adapted to the dimensions of the Arduino Duemilanove Uno, it has a pads area allowing you to easily add additional components necessary to your circuits.</p>



<p>&nbsp;</p>



<p>The pads area can also receive a mini breadboard for initial testing of your prototypes. The pads are square to facilitate the achievement of solder bridges.</p>



<p>&nbsp;</p>



<p>The stackable connectors include all such signals from the arduino making them available for your prototypes. The signals are clearly indicated by the silkscreen on the top and bottom.</p>



<p>&nbsp;</p>



<p>A specific area allows you to solder a SMD component directly on the plate.</p>



<p>&nbsp;</p>



<p>A molex connector allows power supplies to your installation and your Arduino with a simple ATX PC power supply, your Arduino easily becomes autonomous.</p>



<p>&nbsp;</p>



<p>For advanced users, when the Arduino is powered by molex plug, a specific pads area receive 12V (if selected by solder bridge located on the shield). It allows you to controle 12V equipments, perfect to controle transistor fans, motors, lamps, LED ribbon, relays, ...</p>



<p>Finally, the status LED can be used (X) into your prototypes with a cutting track on the bottom (SJ2)</p>



<p>&nbsp;</p>



<p>The shield can be mounted on the Arduino Mega however, pins 14 (TX3) and A7 are difficult to use because partially covered by the shield.</p>



<p>Pins A8 to A15, Digital 22 to 53 and Com 15 to 21 (rear part of the Mega) are not included on the shield.</p>



<p>&nbsp;</p>



<p style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px;"><a style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #5d717e; list-style-type: none; list-style-position: initial; list-style-image: initial; background-image: none; background-attachment: initial; background-origin: initial; background-clip: initial; background-color: initial; text-decoration: none; outline-style: none; outline-width: initial; outline-color: initial; background-position: initial initial; background-repeat: initial initial; padding: 0px; margin: 0px;" title="Assembly guide" href="http://shop.snootlab.com/attachment.php?id_attachment=23" target="_blank"><img style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; outline-style: none; outline-width: initial; outline-color: initial; text-decoration: none; padding: 0px; margin: 0px; border: 0px none initial;" title="Guide de montage" src="https://shop.snootlab.com/img/p/55-288.jpg" alt="Guide de montage" width="169" height="80" /></a></p>



<p style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px;">Documentation and installation guide&nbsp;: <a title="Assembly guide" href="http://shop.snootlab.com/attachment.php?id_attachment=23" target="_blank">direct link</a></p>



<p>&nbsp;</p>



<p>The official support forum: forum.snootlab.com</p>



<p>&nbsp;</p>



<p style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px;"><img style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px; border: 0px initial initial;" src="http://shop.snootlab.com/themes/matrice/img/logos_ext/RoHS-Logo.jpg" alt="Logo RoHS" width="45" height="60" /></p></div>



					<ul id="idTab9">



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=18">Power ScrewShield diagram.pdf</a><br />Operating diagram of the Power ScrewShield</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=19">Power ScrewShield topside.pdf</a><br />Power ScrewShield implementation of  the components </li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=20">Eagle PowerScrewShield.zip</a><br />Eagle files of the Power ScrewSchield (schema and board)</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=22">Power ScrewShield guide FR.pdf</a><br />Power ScrewShield assembly guide FR</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=23">Power ScrewShield guide EN.pdf</a><br />Power ScrewShield Assembly guide EN</li>



				</ul>



moduleID: 2d505f861194750183f944ba86c13b44_28
family: infrared
version: 4
fritzingversion: 0.2.2.b.03.04.2550
author: Stefan Hermann
title: TSOP312.., 314..
label: IR
path: core/tsop312.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The TSOP312.., TSOP314.. series are miniaturized receivers for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame, the epoxy package acts as an IR filter.</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The demodulated output signal can be directly decoded by a microprocessor. The TSOP312.. is compatible with all common IR remote control data formats. The TSOP314.. is optimized to suppress almost all spurious pulses from</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">energy saving fluorescent lamps but will also suppress some data signals. </p></body></html>


moduleID: SparkFun-RF-WLANMODULE-
family: sparkfun wi-fi module
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: DPAC WiFi Module
label: U
date: 2013-02-13
path: core/sparkfun-rf-wlanmodule-.fzp
description:
<b>DPAC WiFi Module</b>
Footprint for DPAC wireless module. Not fully tested so double check it. Spark Fun Electronics SKU : (Module) WRL-00665, (Connector) WRL-00673


moduleID: 22b3bd892734fe28cfbcd54edd4c2a6a
family: ic
version: 4
fritzingversion: 0.7.0b.02.01.5801
author: jonathan
title: STM32F103
label: U
date: 2011-04-06
path: core/STM32F103.fzp
description:
Medium density Cortex-M3 microcontroller. http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00161566.pdf


moduleID: roborio_1
family: robot controller
version: 4
fritzingversion: 0.9.3b
author: Peter Van Epp (vanepp in Fritzing forums)
title: roboRIO
label: cntl
path: core/roborio_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">National Instruments roboRIO robotics controller</p></body></html>


moduleID: Arduino-Pro-Mini-v13
family: //obsolete//microcontroller board (arduino)
version: 4
replacedby: Arduino-Pro-Mini-v13-a4+5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Pro Mini v13
date: 2013-04-03
path: obsolete/Arduino-Pro-Mini-v13.fzp
description:
It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.

The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.


moduleID: PowerSupply-Lipo-v15
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LilyPad LiPower
date: 2013-05-26
path: core/PowerSupply-Lipo-v15.fzp
description:
A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single cell LiPo battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 150mA. Short circuit protected.



This board has a JST connector, which will connect to our JST terminated single cell 3.7V LiPo batteries. It also has terminals for charging the LiPo battery with one of our LiPo chargers.



LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!



Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.



Dimensions:



18mm outer diameter

Thin 0.8mm PCB


moduleID: 4077_4_x_2_input_XNOR_gate_multipart_subpart3
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4077 4 x 2 Input XNOR Gate, multi-part
label: 2
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4077_4_x_2_input_XNOR_gate_multipart_subpart3.fzp


moduleID: DENSO 174917 ECU socket 48pin_c9a68151309697733439e70b6fbd83fd_1
family: denso
version: 4
fritzingversion: 0.7.2b
author: Old Grey
title: 174917_DENSO-ECU-socket_48pin-040-070
path: core/174917_DENSO-ECU-socket_48pin-040-070.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">174917_DENSO-ECU-socket_48pin-040-070</p></body></html>


moduleID: 4081_4_x_2_input_AND_gate_multipart_subpart4
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4081 4 x 2 Input AND Gate, multi-part
label: 3
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4081_4_x_2_input_AND_gate_multipart_subpart4.fzp


moduleID: LilyPad_LED-v14
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LilyPad LED
date: 2013-05-25
path: core/LilyPad_LED-v14.fzp
description:
A simple, very bright, 250mcd, white LED LilyPad. Light up the night!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Dimensions:

5x11mm
Thin 0.8mm PCB


moduleID: SparkFun-RF-NRF24L01-SMD
family: sparkfun 2.4ghz tranceiver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: 2.4GHz Low Power Transceiver
label: U
date: 2013-02-13
path: core/sparkfun-rf-nrf24l01-smd.fzp
description:
<b>2.4GHz Low Power Transceiver</b>
This is the very popular, low cost, very low power RF transceiver from Nordic Semiconductor. Simple SPI interface. SKU: COM-00690


moduleID: hx711_weightsensor
family: weighing sensor breakout
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: Richard Bruneau fixed: f.althaus
title: HX711 Weighing Sensor Module
path: core/hx711_weightsensor.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">HX711 is a precision 24-bit analog-to-digital converter (ADC) designed for weigh scales and industrial control applications to interface directly with a bridge sensor.</span></p></body></html>


moduleID: SparkFun-Sensors-MLX90609-SMD
family: sparkfun gyroscope
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: MLX90609
label: U
date: 2013-02-13
path: core/sparkfun-sensors-mlx90609-smd.fzp
description:
Single axis 150 deg/s analog and SPI MEMs gyroscope. Spark Fun Electronics SKU: COM-08336 and others


moduleID: SparkFun-Sensors-ADXL330-SMD
family: sparkfun accelerometer
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Triple Axis Accelerometer
label: U
date: 2013-02-13
path: core/sparkfun-sensors-adxl330-smd.fzp
description:
<b>Triple Axis Accelerometer</b>
Analog Devices ADXL330 +/-3g 2.4V-5.25V Analog output. Spark Fun Electronics SKU : COM-00730. Center pad paste layer has been reduced to avoid shorting.


moduleID: Si470x-Eval-v11
family: radio breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Digital FM Radio Receiver
date: 2011-07-08
path: core/Si470x-Eval-v11.fzp
description:
<p>


	<strong>Description:</strong> This is a breakout board for the Silicon Laboratories Si4703 FM tuner chip. Beyond being a simple FM radio, the Si4703 is also capable of detecting and processing both Radio Data Service (RDS) and Radio Broadcast Data Service (RBDS) information. The Si4703 even does a very good job of filtering and carrier detection. It also enables data such as the station ID and song name to be displayed to the user.</p>


<p>


	Using this board we are able to pick up multiple stations just as well as with a standard FM radio. The board breaks out all major pins and makes it easy to incorporate this great chip into your next radio project. Also, by plugging headphones into the 3.5mm audio jack, you effectively use the cable in your headphones as an antenna! Therefore, this board does not require an external antenna if using headphones or a 3.5mm audio cable longer than 3 feet.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si470x-Eval-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si470x-Eval-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si4702-03-C19-1.pdf">Datasheet</a> (Si4703)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/tpa6111a2.pdf" target="_blank">Datasheet</a> (TPA6111A2)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si4703_Example.pde" target="_blank">Arduino Example Code</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/AN230_0.61.pdf" target="_blank">Programming Guide</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/8972" target="_blank">WRL-08972</a></p>


moduleID: LM239_383e0df5e7311423c672919352eb812d_8_subpart3
family: lm2xx 4x4 input quad comparator
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by Chad Braham april 2019) (vanepp cleaned up added subparts april 2019)
title: Quad Comparator
label: 3
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/LM239_383e0df5e7311423c672919352eb812d_8_subpart3.fzp


moduleID: LM239_383e0df5e7311423c672919352eb812d_8_subpart4
family: lm2xx 4x4 input quad comparator
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by Chad Braham april 2019) (vanepp cleaned up added subparts april 2019)
title: Quad Comparator
label: 4
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/LM239_383e0df5e7311423c672919352eb812d_8_subpart4.fzp


moduleID: 4001_4_x_2_input_NOR_gate_single
family: 40xx 4x2 input logic gate (single part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4001 4 x 2 Input NOR Gate, single part
label: U
taxonomy: part.dip.14.pins
path: core/4001_4_x_2_input_NOR_gate_single.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4001 4 x 2 Input NOR Gate as a single part</span></p></body></html>


moduleID: c4256c251d53ee723058f86aa6d016a2
family: microcontroller board (gogoboard)
fritzingversion: 0.4.0b.06.21.4282
author: Lionel Michel
title: GogoBoard 4.0
label: GogoBoard 4.0
date: 2010-06-23
path: core/gogoboard 4.0.fzp
description:
The GoGo board framework is a collection of open-source hardware platforms mainly aimed for educational projects.


moduleID: router_1
family: frc
version: 4
fritzingversion: 0.9.3b
author: Nitay Megides (modified by vanepp July 2019)
title: Rounter OpenMesh
label: Router
path: core/router_1.fzp
description:
Open-Mesh OM5P-AC Dual Band 1.17 Gbps Access Point aka: FRC Radio. Note pcb view is supressed as this device will not fit on a pcb.


moduleID: grove_button
family: grove
version: 4
fritzingversion: 0.12.34
author: Yihui Xiong
title: Grove Button
label: Grove
taxonomy: part.dip.8.pins
path: core/seeed_grove_button.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'SimSun';">A button</span></p></body></html>


moduleID: bmp180_breakout
family: pressure sensor breakout
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: Richard Bruneau fixed by f.althaus
title: Barometric Pressure Sensor - BMP180 Breakout (GY-68)
path: core/bmp180_breakout.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This is a simple breakout board for the BMP180, a high-precision, low-power barometric pressure sensor made by Bosch Sensortec. The range of measurement is from 300hPa to 1100hPa. The sensor can be supplied with voltage ranging from 1.8V to 3.6V. Operating temperature range is -40 to +85 °C.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This particular breakout board (or perhaps the configuration) is produced by Shenzhen Keep Power Electronic Co., Ltd., and is commonly found on eBay, AliExpress, and many other online stores.</p></body></html>


moduleID: SparkFun-Sensors-SHT1X-SMD
family: sparkfun humidity sensor
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: SHT1x Humdity Sensor
label: U
date: 2013-02-13
path: core/sparkfun-sensors-sht1x-smd.fzp
description:
<b>SHT1x Humdity Sensor</b>
Sensirion humdity sensor. Schematic element and footprint proven. Spark Fun Electronics SKU : COM-08227


moduleID: Arduino-Pro-Mini3.3V
family: microcontroller board (arduino)
version: 14
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Arduino Pro Mini (3.3V)
date: 2015-10-04
path: core/Arduino-Pro-Mini_3.3v-v14.fzp
description:
It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.

The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.


moduleID: PowerCell-v13
family: power cell lipo charger/booster
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SFE and Fritzing
title: Power Cell LiPo Charger/Booster
date: 2014-11-03
path: core/PowerCell Lipo Charger Booster v13.fzp
description:
The PowerCell board is a single cell LiPo boost converter (to 3.3V and 5V) and micro-USB charger in one. The board comes with a JST connector for a single cell LiPo battery, a micro-USB connector for the 5V charge input, and selectable 3.3V and 5V output pins (labeled ‘out’). There are also two charge pins broken out (labeled ‘charge’), so you can use another 5V power source to charge the batteries, if you don’t have a micro-USB cable.
We’ve also broken out the power-save and enable pins, so that you can have full control of the switching regulator. Keep in mind, if you keep your battery connected to the Powercell, it is recommended that you disable the switching regulator (pull EN low) in order to prevent the battery from discharging and reaching the under voltage cutoff on the battery itself. There is also an under-voltage lockout on the Powercell board which is tied to a solder jumper so that you can disable it if you like.
The micro-USB charger uses the MCP73831 and allows you to charge 3.7V LiPo cells at a rate of 100mA max. If you want to charge at a faster rate, you will need to connect a separate power supply to the pins labeled ‘5V’ and ‘GND’ under the label ‘charge’.
The boost converter is based on the TPS61200 from TI and has solder jumper selectable 5V and 3.3V output, and an under voltage protection of 2.6V (which can be disabled via solder jumper on the back of the PCB).
Note: This board does not have reverse polarity protection, so please be sure to recognize the polarity of your connections!

Dimensions: 1.03 x 0.95"

Features:

- MCP73831 Single Cell LiPo charger at 500mA
- TPS61200 Boost Converter
- Selectable output voltage 3.3 or 5V
- 5V @ 600mA max
- 3.3V @ 200mA max
- Undervoltage lock out at 2.6V (with disable jumper)
- Quiescent current, less than 55uA
- JST connector for LiPo battery
- micro-USB connector for charge power source
- Inductor: 4.7uH, 1.2A Sumida CDRH2D18
- Over temperature protection


moduleID: audiojack_breakout-v11
family: audio breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Audio Jack Breakout
date: 2011-07-08
path: core/audiojack_breakout-v11.fzp
description:
<p>


	<strong>Replacement:</strong> <a href="http://www.sparkfun.com/products/10588" target="_blank">PRT-10588</a>. The new revision corrects the silkscreen so that the pins are now labeled correctly. This page is for reference only.</p>


<p>


	<span style="font-weight: bold;">Description:</span> Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.<br />


	<br />


	<strong><span style="font-weight: bold;">Note: </span></strong>This is for the bare PCB only.</p>


<p>


	<strong>Note:</strong> The silkscreen is incorrect. We are working on a revision. However, the board is still usable, but the labeling isn&#39;t even close to correct. Here is the correct pin labeling (from top to bottom):</p>


<ul>


	<li>


		GND (Ground)</li>


	<li>


		RNG (Ring)</li>


	<li>


		RSH (Ring Shunt)</li>


	<li>


		TIP (Tip)</li>


	<li>


		TSH (Tip Shunt)</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span> <a href="http://www.sparkfun.com/datasheets/BreakoutBoards/audiojack_breakoutsch.pdf" target="_blank">Schematic</a></p>


moduleID: 4011_4_x_2_input_NAND_gate_multipart_subpart2
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4011 4 x 2 Input NAND Gate, multi-part
label: 1
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4011_4_x_2_input_NAND_gate_multipart_subpart2.fzp


moduleID: AnalogDevices_AD8561ANZ
family: adi-comp
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: AD8561 - Ultrafast 7ns Single Supply Comparator
label: U
path: core/ADI_AD8561.AnalogDevices_AD8561ANZ.fzp
spice:
X{instanceTitle} {net connector1} {net connector2} {net connector0} {net connector3} {net connector4} {net connector5} {net connector6} {net connector7} AD8561


moduleID: Taiway-100-SP-X-T1-X-X-B1-M2_SPDT_miniature_toggle_switch
family: taiway 100 series switch
version: 4
fritzingversion: 0.1.1255
author: Stephen Parry
title: Taiway 100-SP-X-T1 SPDT Miniature Toggle Switch
label: S
path: core/Taiway-100-SP-X-T1-X-X-B1-M2_SPDT_miniature_toggle_switch.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">

<html><head><meta name="qrichtext" content="1" /><style type="text/css">

p, li { white-space: pre-wrap; }

</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">

<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Taiway SP1-T1 SPDT Miniature Toggle Switch.</p>

<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This switch has two or three positions, the function of which varies depending on the exact model:</p>

<table border="1" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0">

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p></td>

<td colspan="3">

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Position</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Model</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">\_</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">_|_</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">_/</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-1</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">None</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-2</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">None</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-3</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Off</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-4</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Off</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SP-5</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">On</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Off</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">(On)</p></td></tr></table>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This part will suffice for all 5 model variations, but is important the designer specifies clearly which model is intended.</p>

<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The breadboard view is rendered as non-perspective top projection for layout on stripboard or similar.</p>

<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">There are four Fritzing variants of this part:</p>

<table border="1" style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px;" cellspacing="2" cellpadding="0">

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Variant</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Part Suffix</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Description</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">-M1</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Solder lug terminals mounted through hole</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">2</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">-M2</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">PC terminals mounted through hole</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">3</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">n/a</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Switch mounted through board , upper actuator part, no electrical connections.</p></td></tr>

<tr>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">4</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">-M1 or -M5</p></td>

<td>

<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Switch mounted through board, lower body part, with solder lug or wire wrap electrical connections.</p></td></tr></table>

<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A complete through board switch can be made using a combination of variants 3 and 4. This variant is variant 2.</p></body></html>


moduleID: SparkFun-Connectors-RJ11-6-PTH
family: //obsolete//sparkfun rj-xx jack
version: 4
replacedby: SparkFun-Connectors-RJ11-6-PTH_fix
fritzingversion: 0.7.2b
author: www.fritzing.org
title: RJ11 Jack
label: J
date: 2013-02-13
path: obsolete/sparkfun-connectors-rj11-6-pth.fzp
description:
<b>RJ11 Jack</b>
Simple 6 pin RJ11 jack. Commonly found on CAT3 devices and Microchip programmers. SKU: PRT-00132


moduleID: Camdenboss_CTB0158-4_5_08mm_pitch_90deg_terminals
family: ctb01x8
version: 5
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen Parry
title: Camdenboss CTB0158-4
label: J
path: core/Camdenboss_CTB0158-4_5_08mm_pitch_90deg_terminals.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Camdenboss CTB0158-4</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">5.08mm (0.2&quot;) Pitch Standard Profile 90 ̊  Rising Clamp Terminal, 4 pole</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The real-life connectors are modular, made up of two or three connector blocks slotted together. These can be further slotted together to make larger connectors.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fritzing part is derived from Screw terminals by Lionel Michel.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Because of the offset between connection pins and screw terminals, these are implemented male / female pairs of connectors with an internal connection.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: FINALWEIO_ff7656622014dbb325626f2fefde52eb_1
family: microcontroller board
version: 1
fritzingversion: 0.9.0b
author: Drasko DRASKOVIC
title: WeIO
path: core/WeIO.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-windent:0px;">WeIO is an innovative open source hardware and software platform for rapid prototyping and creation of wirelessly connected interactive objects using only popular Web languages such as HTML5 or Python.</p></body></html>


moduleID: pinoccio_board
family: pinocc.io
version: 4
fritzingversion: 0.9.0b.02.18.4756
author: f.althaus
title: pinocc.io scout
date: 2014-09-10
path: core/pinoccio.fzp
description:
The Arduino-compatible atomic unit of Pinoccio: Every Field Scout can talk to any other Field Scout via radio (up to about 100m away). The built-in temperature sensor and RGB LED are perfect for starter projects.


moduleID: SparkFun-PowerIC-MCP73833-
family: sparkfun battery charger ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Unproven!
label: U
date: 2013-02-13
path: core/sparkfun-poweric-mcp73833-.fzp
description:
Stand-alone Linear Li-ion/Li-polymer Charge Management Controller<br>
Packages: DFN-10, MSOP-10<br>
<br>
Last modified: 8/17/10<br>
<b>Unproven!</b>


moduleID: AnalogDevices_ADTL082ARZ_subpart2
family: adi-opamp-dual
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: ADTL082 - Dual JFET Input Op Amps
label: 2
spice:
X{instanceTitle}A {net connector3} {net connector2} {net connector8} {net connector4} {net connector1} ADTL082
X{instanceTitle}B {net connector5} {net connector6} {net connector8} {net connector4} {net connector7} ADTL082

path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/AnalogDevices_ADTL082ARZ_subpart2.fzp


moduleID: OpenLog
family: data logger
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Andre Knoerig
title: OpenLog
date: 2012-02-02
path: core/OpenLog.fzp
description:
OpenLog is an open source data logger. Simple to use, simple to change. We wanted to create a serial logger that just worked. Power up this device and it will start logging any received serial data at 9600bps.


moduleID: Adafruit_HUZZAH_ESP8266_Breakout_c78691c8aa42e23bb46af61759de99b8_1
family: //obsolete//breakout boards
version: 4
replacedby: huzzah_esp8266
fritzingversion: 0.7.12b.02.13.6882
author: pkurtans
title: Adafruit HUZZAH ESP8266 Breakout
label: Adafruit HUZZAH ESP8266 Breakout
path: obsolete/Adafruit_HUZZAH_ESP8266_Breakout_c78691c8aa42e23bb46af61759de99b8_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:</p>
<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Reset button,</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">User button that can also put the chip into bootloading mode,</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Red LED you can blink</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Level shifting on the UART and reset pin</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">3.3V out, 500mA regulator (you'll want to assume the ESP8266 can draw up to 250mA so budget accordingly)</li>
<li style=" margin-top:0px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Two diode-protected power inputs (one for a USB cable, another for a battery) </li></ul></body></html>

spice:
X{instanceTitle} {net connector1} {net connector2} {net connector3} {net connector4} {net connector5} {net connector6} {net connector7} {net connector8} AD8210


moduleID: Lilypad_PowerSupply-v16
family: //obsolete//microcontroller board (lilypad)
version: 4
replacedby: Lilypad_PowerSupply-v18
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: LilyPad Power Supply
date: 2013-05-26
path: obsolete/Lilypad_PowerSupply-v16.fzp
description:
A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 100mA. Short circuit protected.

This board has AAA battery clips but can use an input from 1.2V to 5V. Our lithium polymer batteries are a good, rechargable alternative.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!


moduleID: SparkFun-Connectors-M10-2MMSMD
family: sparkfun pin header
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Header 10
label: JP
date: 2013-02-13
path: core/sparkfun-connectors-m10-2mmsmd.fzp
description:
<b>Header 10</b>
Standard 10-pin 0.1 header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).


moduleID: SparkFun-Sensors-L3G4200D-
family: sparkfun gyroscope
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Package:
label: U
date: 2013-02-13
path: core/sparkfun-sensors-l3g4200d-.fzp
description:
<h3>L3G4200D Three-axis, digital output gyroscope</h3>
The L3G4200D is a low-power three-axis angular rate sensor, has a full scale of ±250/±500/±2000 dps and is capable of measuring rates with a user-selectable bandwidth.<br><br>
It includes a sensing element and an IC interface capable of providing the measured angular rate to the external world through a digital interface (I2C/SPI).
<hr>
<b>Package:</b> 4x4x1.1 LGA-16 (LGA16-4x4.PAC)<br>


moduleID: PCM_1
family: frc pcm
version: 4
fritzingversion: 0.9.3b
author: Nitay Megides(Modified by vanepp July 2019)
title: PCM
label: PCM
path: core/PCM_1.fzp
description:
VEX Pneumatic Control Module CAN bus control of pneumatic valves for the First Robotics. As all connections are to connectors PCB view has been supressed as unneeded.


moduleID: MP3 Shield-v13
family: music shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino MP3 Player Shield
date: 2011-07-08
path: core/MP3 Shield-v13.fzp
description:
<p>


	<strong>Description: </strong>This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now you can pull MP3 files from an SD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone&nbsp; MP3 player! The MP3 Shield still utilizes the <a href="http://www.sparkfun.com/products/8892">VS1053B</a> MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.</p>


<p>


	The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1&quot; pitch header.</p>


<p>


	This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed. We recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3 Shield-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3 Shield-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/SMD/vs1053.pdf" target="_blank">Datasheet</a> (VS1053B)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3_Player_Example.pde" target="_blank">MP3 Player Example Code</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3_Player_Files.zip" target="_blank">Sample MP3 Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3_Player_Example_Control.pde" target="_blank">MP3 Player Control Example</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3_Shield_Example.zip" target="_blank">MP3 Decoding Example Sketch</a></li>


</ul>


moduleID: PWM-Shield-v12
family: pwm
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: PWM Shield
date: 2011-11-29
path: core/PWM-Shield-v12.fzp
description:
<p>


	<strong>Description:</strong> This is the Arduino shield version of our TLC5940 Breakout. The PWM Shield will allow you to generate up to 16 PWM signals from your Arduino by utilizing the power of the TLC5940 IC. All 16 PWM channels are broken out to standard 0.1&quot; headers, which run alongside convenient voltage and ground rails. Because the IC can be daisy-chained, output headers are broken out on one side of the shield and can be connected to our TLC5940 Breakout to further expand your PWM capabilities.&nbsp;</p>


<p>


	Use this board to increase the number of PWM pins available to your microcontroller for applications such as monocolor, multicolor or full-color LED displays, LED signboards, display backlighting, servo control, or any other project where a large number of PWM drivers are necessary.</p>


<p>


	<strong>Note: </strong>While each 3-pin PWM header is 0.1&quot; spaced, the space between each header is slightly larger in order to accommodate servo connections. In order to make this board suitable for use with servos, 2.2k pull-up resistors have been included on each output as well. Finally, the 2.2k resistor on the Iref pin sets the output current to 17.8mA but a parallel through-hole connection is provided for an additional resistor to increase the current if necessary. To determine the resistor value you need for a given output check the equations provided on the schematic below.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/PWM-Shield-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/PWM-Shield-v12.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/General/tlc5940.pdf" target="_blank">Datasheet</a> (TLC5940)</li>


	<li>


		<a href="http://code.google.com/p/tlc5940arduino/" target="_blank">Arduino Library</a></li>


	<li>


		<a href="http://www.arduino.cc/playground/Learning/TLC5940" target="_blank">Arduino Example</a></li>


</ul>


moduleID: bf73a00d2ecd04be25675ebfb2d130c0
family: humidity breakout
fritzingversion: 0.7.0b.02.01.5801
author: wreutz
title: Humidity Temperature Sensor SHT15
date: 2012-02-20
path: core/Humidity_Sensor_SHT15.fzp
description:
<p><b>Description:</b></p>
      <p>This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technology integrates two sensors and readout circuitry on one single chip.

      These sensors are really impressive! Very sensitive and straight forward to use. Board comes assembled and tested with the SHT15.</p>

      <p><b>Features:</b></p>

<ul>
	<li>2 factory calibrated sensors for relative humidity & temperature</li>
	<li>Digital 2-wire interface</li>
	<li>Precise dewpoint calculation possible</li>
	<li>Measurement range: 0-100% RH</li>
	<li>Absolute RH accuracy: +/- 2% RH (10...90% RH)</li>
	<li>Repeatability RH: +/- 0.1% RH</li>
	<li>Temp. accuracy: +/- 0.3°C @ 25°C</li>
	<li>Fast response time < 4 sec.</li>
	<li>Low power consumption (typ. 30 µW)</li>
	<li>Low cost</li>
	<li>High precision sensor at low cost</li>
	<li>Leading CMOSens Technology for superior long-term stability</li>
</ul>

<p><b>Applications:</b></p>

<ul>
	<li>Precise data logging</li>
	<li>Transmitters</li>
	<li>Automation & process control</li>
	<li>Building control and HVAC</li>
	<li>Test & Measurement</li>
	<li>Medical</li>
</ul>

<p><b>Documents:</b></p>

<ul>
  <li>
    <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Pressure/SHT1x-Breakout-v13.pdf" name="" target="_blank">Schematic</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Pressure/SHT1x-Breakout-v13.zip" name="" target="_blank">Eagle Files</a></li>
  </li>
  <li>
    <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Datasheet-humidity-sensor-SHT1x.pdf" name="" target="_blank"> SHT1x Datasheet</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/SHT15-Testing-v11.zip" name="" target="_blank">Example C Code (PIC 16F88)</a></li>
  </li>
  <li>
     <a classname="" href="http://wiring.org.co/learning/basics/humiditytemperaturesht15.html" name="" target="_blank">Wiring Example</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sensirion.com/en/02_sensors/03_humidity/00_humidity_temperature_sensor/03_humidity_sensor_sht15.htm" name="" target="_blank">Application Notes</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sensirion.com/images/getFile?id=11" name="" target="_blank">Calibration Certificate</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sensirion.com/images/getFile?id=123" name="" target="_blank">RoHS Certificate</a></li>
  </li>
</ul>


moduleID: SparkfunIMUBreakoutMPU-9250
family: imu sensor
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: fredrmag
title: SparkFun IMU Breakout - MPU-9250
label: MPU9250,MPU-9250
path: core/Sparkfun_IMU_Breakout_MPU-9250.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The SparkFun MPU-9250 IMU Breakout features the latest 9-axis MEMS sensor from InvenSense. Each of these 9DoF breakouts feature an MPU-9250 with a System in Package (SiP) that combines two chips: the MPU-6500, which contains a 3-axis gyroscope as well as a 3-axis accelerometer, and the AK8963, which features a 3-axis magnetometer. This breakout has been designed to be smaller than some of our other offerings to fit in smaller projects. However, if you plan to use a breadboard, or secure the IMU board to a project with something like epoxy, the mounting holes can be easily snapped off. </p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">To achieve its smaller size, the MPU-9250 Breakout features PTH pins that have been wrapped around the border of the PCB in three rows of three or four. The top row (J1) is all one needs to get the most functionality out of the IMU. These include the I<span style=" vertical-align:super;">2</span>C and power interface. The second most likely to be used set of PTHs are found along the bottom (J3). This includes the address pin, the interrupt pin, and the IO voltage supply for easy interface with a more modern 1.8V processor. The third, a non-breadboard-compatible row (J2), is used for features like running other I<span style=" vertical-align:super;">2</span>C devices as slaves to this one. For prototyping with these connections, throw your connections on top as you would with an Arduino Pro mini or similar product. </p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The MPU-9250 replaces the popular EOL MPU-9150 and decreases power consumption by 44 percent. According to InvenSense, “Gyro noise performance is 3x better, and compass full-scale range is over 4x better than competitive offerings.” The MPU-9250 uses 16-bit Analog-to-Digital Converters (ADCs) for digitizing all nine axes, making it a very stable 9 Degrees of Freedom board.</p></body></html>


moduleID: SparkFun-Connectors-USB_AB-
family: sparkfun usb connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: USB_AB
label: U
date: 2013-02-13
path: core/sparkfun-connectors-usb_ab-.fzp
description:
This is a USB AB connector that is compatible with USB OTG. i.e. this connector can serve as a host or device


moduleID: MonsterMoto-Shield-v12
family: motor controller
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Monster Moto Shield
date: 2011-11-29
path: core/MonsterMoto-Shield-v12.fzp
description:
<p>


	<strong>Description:</strong> This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we&#39;ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We&#39;ve also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.</p>


<p>


	<strong>Note:</strong> When using this board in extreme high-demand applications it may be necessary to improve thermal performance with a heat-sink or fan and to solder the wires directly to the board instead of using a screw terminal (in addition to the myriad other complications present in a 30A system) However, when using the board at currents up to 6A the chips will barely become noticeably warm.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Voltage max: 41V</li>


	<li>


		Maximum current rating: 30 A</li>


	<li>


		Current sensing available to Arduino analog pin</li>


	<li>


		MOSFET on-resistance: 19 m&Omega; (per leg)</li>


	<li>


		Maximum PWM frequency: 20 kHz</li>


	<li>


		Thermal Shutdown</li>


	<li>


		Undervoltage and Overvoltage shutdown</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MonsterMoto-Shield-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MonsterMoto-Shield-v12.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/10832.pdf" target="_blank">Datasheet</a> (VNH2SP30)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MonsterMoto_Shield_Example.pde" target="_blank">Example Code</a></li>


</ul>


moduleID: mega_pro-v13
family: sparkfun microcontroller
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Arduino Mega Pro 3.3V
date: 2015-10-31
path: core/mega_pro-v13.fzp
description:
Mega Pro 3.3V

It’s powerful, it’s portable, it’s Pro! We’re continuing our Pro series of Arduino-compatible micro-controllers with the addition of the Mega Pro. This is a 3.3V microcontroller running a version of the stk500v2 bootloader at 8MHz. Just like the other Pro-series boards this board is built with all SMD components and comes with no headers populated in order to minimize the cost and the board profile. Of course this board has the same pin-configuration as the Arduino Mega so it is dimensionally shield compatible (but do keep in mind that this is a 3.3V board unlike the Arduino Mega).



The Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board. This board connects directly to the FTDI Basic Breakout board and supports auto-reset and the DC power jack footprint is available, but not populated.



Note: If you are using Arduino, modifications were made to the bootloader to support the 3.3V system, you will need to download and install a new board definition so that the Mega Pro can be programmed in the Arduino environment. The .zip archive below contains all of the files that you’ll need including a “readme” file with simple instructions for how to install them. OR you can use Wiring and not worry about this since the board is officially supported. You will need to download the board definition files here.


moduleID: RFID_USB_Reader-v14
family: rfid
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: RFID USB Reader
date: 2011-07-08
path: core/RFID_USB_Reader-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer.</p>


<p>


	This new revision uses SMD headers for the RFID module, and has a solder jumper which allows you to disable or enable the buzzer.<br />


	<br />


	<strong>Note: </strong>This product does not come with the RFID reader. Check below for compatible readers.<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span> 1.4x1.2x0.57&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/ID/RFID_USB_Reader-v14.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/ID/RFID_USB_Reader-v14Eagl.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.ftdichip.com/FTDrivers.htm" name="" target="_blank">USB FTDI Drivers for Linux, MAC, and PC</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/8852" target="_blank">SEN-08852</a></p>


<p>


	&nbsp;</p>


<p>


	&nbsp;</p>


<p>


	<object height="300" width="560"><param name="movie" value="http://www.youtube.com/v/2ioDBOOAFvM&amp;hl=en_US&amp;fs=1&amp;rel=0" /><param name="allowFullScreen" value="true" /><param name="allowscriptaccess" value="always" /><embed allowfullscreen="true" allowscriptaccess="always" height="300" src="http://www.youtube.com/v/2ioDBOOAFvM&amp;hl=en_US&amp;fs=1&amp;rel=0" type="application/x-shockwave-flash" width="560"></embed></object></p>


moduleID: AnalogDevices_ADTL082ARZ_subpart1
family: adi-opamp-dual
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: ADTL082 - Dual JFET Input Op Amps
label: 1
spice:
X{instanceTitle}A {net connector3} {net connector2} {net connector8} {net connector4} {net connector1} ADTL082
X{instanceTitle}B {net connector5} {net connector6} {net connector8} {net connector4} {net connector7} ADTL082

path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/AnalogDevices_ADTL082ARZ_subpart1.fzp


moduleID: sodaq_mbili_rev4 (4)
family: microcontroller board (sodaq)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: fabian althaus
title: sodaq mbili
date: 2015-01-12
path: core/sodaq_mbili_rev4 (4).fzp
description:
We have designed the new SODAQ Mbili (which means Two in Swahili) with all the input we got from our early adopters.



What’s so great about the Mbili?



1284P Microcontroller



The Atmega 1284P is the ‘big brother’ of the 328P. It has all the memory and program space you have been hoping for.



128kB flash for your programs (that’s 4x more than the 328P)

16kB memory (that’s 8x more!)

It’s still a picopower chip, so it is ideal for low (solar) power applications. You can still program it with the Arduino IDE. The bootloader has been patched and the hardware files are available. Just recompile your sketches and you are ready to go.


moduleID: NRF24L01_22e0249967228a8065b800b57589b75e_25
family: //obsolete//radio
version: 4
replacedby: NRF24L01_fix
fritzingversion: 0.5.2b.02.18.4756
author: Doume
title: NRF24L01
path: obsolete/NRF24L01_22e0249967228a8065b800b57589b75e_25.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.Lucida Grande UI'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">2.4 Ghz NRF24L01 </p></body></html>


moduleID: Level-Converter-v11
family: level shifter
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Logic Level Converter
date: 2011-07-08
path: core/Level-Converter-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> If you&#39;ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side. Two inputs and two outputs are provided for each side.<br />


	<br />


	Bread board friendly! Can be used with normal serial, I2C, SPI, and any other digital signal. Does not work with an analog signal.<br />


	<br />


	The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the &#39;HV&#39; pin, low voltage (2.8V for example) to &#39;LV&#39;, and ground from the system to the &#39;GND&#39; pin.<br />


	<br />


	Pins are labeled as <span style="font-weight: bold;">I</span>nputs and <span style="font-weight: bold;">O</span>utputs. These are relative to the board. A digital one going into the RXI pin on the 5V side will show up on the RXO pin on the 3.3V side as 3.3V. A digital one going into the TXI pin on the 3.3V side will show up on the TXO pin on the 5V side as 5V.<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span> 0.5x0.6&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span> <a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Level-Converter-v10.pdf" target="_blank">Schematic</a></p>


moduleID: EasyDriver_v44
family: motor driver
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: EasyDriver_v44
date: 2011-07-10
path: core/EasyDriver_v44.fzp
description:
<p>

	<strong>Replacement:</strong> <a href="http://www.sparkfun.com/products/10267" target="_blank">ROB-10267</a>. The new version fixes the silkscreen error. This page is for reference only.</p>

<p>

	<span style="font-weight: bold;">Description:</span> The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse. EasyDriver requires a 7V to 30V supply to power the motor, and has an on board voltage regulator for the digital interface. Connect a 4-wire stepper motor and a microcontroller and you&#39;ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.</p>

<p>

	This is the newest version of EasyDriver V4 co-designed with <a classname="" href="http://www.schmalzhaus.com/" name="" target="_blank">Brian Schmalz</a>. It provides much more flexibility and control over your stepper motor, when compared to older versions.&nbsp;The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.<br />

	<br />

	<span style="font-weight: bold;">Caution:</span> Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.</p>

<p>

	<strong>Note:</strong> Version 4.3 of the PCB has an error on the Current Adjustment silkscreen. The Min/Max labels are reversed. The correct direction for maximum current is counter-clockwise.<br />

	<br />

	<span style="font-weight: bold;">Features:</span></p>

<ul>

	<li>

		A3967 microstepping driver</li>

	<li>

		MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eigth steps</li>

	<li>

		Compatible with 4, 6, and 8 wire stepper motors</li>

	<li>

		Adjustable current control from 150mA/phase to 750mA/phase</li>

	<li>

		Power supply range from 7V to 30V. The higher the voltage, the higher the torque.</li>

</ul>

<p>

	<span style="font-weight: bold;">Documents:</span></p>

<ul>

	<li>

		<a classname="" href="http://www.sparkfun.com/datasheets/Robotics/EasyDriver_v43.pdf" name="" target="_blank">Schematic</a></li>

	<li>

		<a href="http://www.sparkfun.com/datasheets/Robotics/A3967.pdf" target="_blank">A3967 Datasheet</a></li>

	<li>

		<a classname="" href="http://schmalzhaus.com/EasyDriver/" name="" target="_blank">EasyDriver Website</a></li>

	<li>

		Example <a classname="" href="http://www.tigoe.net/pcomp/code/circuits/motors/controlling-dc-motors" target="_blank">Stepper Motor Control</a></li>

	<li>

		Example <a classname="" href="http://lusorobotica.com/index.php/topic,106.0.html" name="" target="_blank">Arduino Tutorial</a> in Portuguese</li>

</ul>

<p>

	&nbsp;</p>

<ul>

</ul>


moduleID: monacor_ltr_110_linetransformer
family: transformator
fritzingversion: 0.9.2b
author: Fabian Althaus
title: Monacor line transformer
label: LTR 110
date: 2015-11-15
path: core/monacor_ltr_110_linetransformer.fzp
description:
Monacor Line Transformator LTR-110.
            Frequency range: 15-30000 Hz
            Transmission ratio: 1: 1/2: 1
            Input Impedance: 600 Ohm
            Output Impedance: 600 Ohm / 300 Ohm
            Optimum source impedance: 50-600 Ohm
            Optimum load impedance:> = 5 kOhm
            Max. Input Voltage (1% THD / 40Hz): 5 V
            Dimensions: 25x19x19,5 mm
            Weight: 28 g


moduleID: LilyPad-Button-v12
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: LilyPad Button Board
date: 2013-05-26
path: core/LilyPad-Button-v12.fzp
description:
We designed this board to give the user a very discrete button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Dimensions:

8x16mm
Thin 0.8mm PCB


moduleID: Sony_Spresense_ext_board_1
family: spresense ext board
version: 5
fritzingversion: 0.9.3b
author: Peter Van Epp (vanepp in forums)
title: Spresense ext board
label: M
path: core/Sony_Spresense_ext_board_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Spresense extension board provides pin compatibility with selected Arduino shields along with an SD card slot, a headphone jack and multiple microphone pins.</p></body></html>


moduleID: TE_RELAY
family: te general purpose relays
version: 5
fritzingversion: 0.7.2b
author: www.squarewolf.nl, f.althaus
title: RELAY
label: U
path: core/TE_RELAY.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.SF NS Text'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">SPST relay</p></body></html>


moduleID: SI4735 Shield-v13
family: radio
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Si4735 AM & FM Receiver Shield
date: 2011-11-29
path: core/SI4735 Shield-v13.fzp
description:
<p>


	<strong>Description:</strong> The Si4735 is the first digital CMOS AM/FM radio receiver IC that integrates the complete tuner function from antenna input to audio output. This feature-rich solution includes advanced seek algorithms, soft mute, auto-calibrated digital tuning, and FM stereo processing. The chip also incorporates a digital processor for the European Radio Data System (<a href="http://en.wikipedia.org/wiki/Radio_Data_System" target="_blank">RDS</a>) and the North American Radio Broadcast Data System (<a href="http://en.wikipedia.org/wiki/RBDS" target="_blank">RBDS</a>), including all required symbol decoding, block synchronization, error detection, and error correction functions. Basically it&#39;s an entire AM/FM, LW/SW radio in a single chip.</p>


<p>


	Now that we&#39;ve mounted it on a shield, you can harness all of that sweet radio-playing power right from your Arduino. Simply stack the shield onto your Arduino board, plug in some speakers (headphones don&#39;t seem to work as well without a preamp) and use the library below to control the volume, channel selection, etc. The library also allows you to send a variety of other commands constructed by consulting the Si4735 Programmers Guide.</p>


<p>


	This board seems to get decent reception compared to other stereos around the office even using a simple wire antenna. If you happen to have an antenna that you&#39;d like to use it can be soldered right to the via marked &quot;antenna&quot;.</p>


<p>


	<strong>Documents: </strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/SI4735 Shield-v13.pdf" target="_blank">Schematic </a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/SI4735 Shield-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Si4735 Datasheet.pdf" target="_blank">Datasheet</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Si4735.zip" target="_blank">Arduino Library</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Si4735 Programming Guide.pdf" target="_blank">Programming Guide</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/RBDS Standard.pdf" target="_blank">RBDS Standard</a></li>


</ul>


moduleID: linino_dogrj45
family: microcontroller board (linino)
fritzingversion: 0.9.0b
author: fabian_atlthaus
title: linino dogRJ45
label: linino dogRJ45
date: 2014-06-22
path: core/linino_dogrj45(01).fzp
description:
Designed to meet IEEE 802.3 Fast Ethernet switch with auto-crossover, auto-polarity, and auto-negotiation.
10/100 Mbps Fast Ethernet port basic switch feature including port mirroring, broadcast storm support, flow control in full-duplex, and back pressure in half duplex.


moduleID: SparkFun-DigitalIC-WS2801-
family: sparkfun led driver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: WS2801
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-ws2801-.fzp
description:
<h3>WS2801</h3>
3 Channel Constant Current LED Driver with programmable PWM outputs.
<br>
<br>
Datasheet:  http://www.sparkfun.com/datasheets/Components/LED/WS2801.pdf


moduleID: MPR121-Breakout-v13
family: sparkfun
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: fabian althaus
title: MPR121 Breakout
date: 2014-06-14
path: core/MPR121-Breakout-v13.fzp
description:
This is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs.

There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don’t require the pull-up resistors you can open the jumpers by cutting the trace connecting them.

There is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC. The VREG pin is connected through a 0.1uF capacitor to ground, which means, unless you modify the board, you can’t operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).


moduleID: Gizwits_WiFi_Witty_ESP_12F
family: gizwits wifi witty esp-12f
version: 1
fritzingversion: 0.9.3b
author: Mike Causer
title: Gizwits WiFi Witty ESP-12F
label: Gizwits WiFi Witty ESP-12F
path: core/Gizwits_WiFi_Witty_ESP_12F.fzp
description:
A breadboard friendly two part WiFi development board by Gizwits, powered by an ESP8266 ESP-12F SoC, featuring twin micro-usb ports, a photoresistor, a WS2812 RGB-LED and three buttons. The board comes in two parts. The bottom half has reset and flash buttons, a micro-usb with CH340 UART and 2x 1x08 female headers. The top half has the ESP-12F, LDR, RGB-LED, micro-usb (for power only), an input button and 2x 1x08 male headers which fill an entire breadboard (12 pins wide).


moduleID: 1e03b5a5-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_7
author: Fritzing Part-o-matic
title: Mystery Part - 7 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.7pins
path: obsolete/mystery_part7.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 7 pins on a 100 mil inline pin header footprint.


moduleID: Arduino DUE V02b
family: microcontroller board (arduino)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Due (Rev2b)
path: core/Arduino_DUE_V02b.fzp
description:
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.



Warning: Unlike other Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board.



The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.



The Due follows the 1.0 pinout:



    TWI: SDA and SCL pins that are near to the AREF pin.

    The IOREF pin which allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V.

    An unconnected pin, reserved for future use. 



The Due has a dedicated forum for discussing the board.


moduleID: ArduinoBluetoothMatev13
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Bluetooth Mate Silver
date: 2011-07-08
path: core/ArduinoBluetoothMatev13.fzp
description:
<p>


	<b>Description: </b>The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_self">Arduino Pros</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9266" name="" target="_self">LilyPad Arduinos</a>. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.</p>


<p>


	Bluetooth Mate has the same pin out as the FTDI Basic, and is meant to plug directly into an Arduino Pro, Pro Mini, or LilyPad Mainboard. Because we&#39;ve arranged the pins to do this, you cannot directly plug the Bluetooth Mate to an FTDI Basic board (you&#39;ll have to swap TX and RX).</p>


<p>


	The RN-42 is perfect for short range, battery powered applications.&nbsp; The RN-42 uses only 26uA in sleep mode while still being discoverable and connectable.&nbsp; Multiple user configurable power modes allow the user to dial in the lowest power profile for a given application. If you need longer range, check out the Bluetooth Mate Gold.</p>


<p>


	The Bluetooth Mate has on-board voltage regulators, so it can be powered from any 3.3 to 6VDC power supply. We&#39;ve got level shifting all set up so the RX and TX pins on the remote unit are 3-6VDC tolerant. <span style="font-weight: bold;">Do not</span> attach this device directly to a serial port. You will need an <a href="http://www.sparkfun.com/products/449" target="_blank">RS232 to TTL converter circuit</a> if you need to attach this to a computer.</p>


<p>


	Unit comes without a connector; if you want to connect it to an Arduino Pro, we&#39;d suggest the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9429" name="" target="_self">6-pin right-angle female header</a>.</p>


<p>


	<strong>Note: </strong>The hardware reset pin of the RN-42 module is broken out on the bottom side of the board. This pin is mislabeled as &#39;PIO6&#39;, it is actually PIO4. Should you need to reset the Mate, pull this pin high upon power-up, and then toggle it 3 times.</p>


<p>


	<span style="font-weight: bold;">Features</span><b>:</b></p>


<ul>


	<li>


		Designed to work directly with Arduino Pro&#39;s and LilyPad main boards</li>


	<li>


		FCC Approved Class 2 Bluetooth<sup><font face="Tahoma, sans-serif"><b>&reg; </b></font></sup>Radio Modem!</li>


	<li>


		Low power consumption : 25mA avg</li>


	<li>


		Hardy frequency hopping scheme - operates in harsh RF environments like WiFi, 802.11g, and Zigbee</li>


	<li>


		Encrypted connection</li>


	<li>


		Frequency: 2.4~2.524 GHz</li>


	<li>


		Operating Voltage: 3.3V-6V</li>


	<li>


		Serial communications: 2400-115200bps</li>


	<li>


		Operating Temperature: -40 ~ +70C</li>


	<li>


		Built-in antenna</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions: </span></p>


<ul>


	<li>


		Board: 1.75x0.65&quot;<br />


		<span style="font-weight: bold;"> </span></li>


</ul>


<p>


	<b>Documents:</b> <a href="http://www.sparkfun.com/datasheets/RF/BlueSMiRF_v1.pdf" target="_blank"><br />


	</a></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/ArduinoBluetoothMatev13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/ArduinoBluetoothMatev13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/rn-bluetooth-um.pdf" name="" target="_blank">RN-42 AT Command Set</a><a href="http://www.sparkfun.com/datasheets/RF/RN_BlueportII-ref-guide.pdf" id="Roving Networks Bluetooth Command Set" name="Roving Networks Bluetooth Command Set" target="_blank"></a></li>


	<li>


		<a classname="" href="http://www.rovingnetworks.com/documents/RN-41.pdf" name="Roving Networks Bluetooth module datasheet" target="_blank">Roving Networks Bluetooth<sup><font face="Tahoma, sans-serif"><b>&reg;</b></font></sup> module datasheet</a><br />


		<a href="http://www.sparkfun.com/datasheets/RF/RN-24-guide.pdf" id="Roving Networks RN-24 Usage Guide" name="Roving Networks RN-24 Usage Guide" target="_blank"></a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/67" target="_blank">Check out our Bluetooth Tutorial</a></li>


</ul>


moduleID: prefix0000_642e08dceb3d1de4c31ea2bcfb635c6f_1
family: ph sensor
version: 4
fritzingversion: 0.9.3b
author: Peter Van Epp (vanepp in forums)
title: PH meter
label: S
path: core/DFRobot-PH-sensor.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">DFrobot PH meter (SKU SEN0161)</p></body></html>


moduleID: PocketBeagle
family: computer
version: 4
fritzingversion: 0.9.3
author: Jason Kridner + F.Althaus
title: PocketBeagle
path: core/PocketBeagle.fzp
description:
PocketBeagle® is an ultra-tiny-yet-complete Linux-enabled, community-supported, open-source USB-key-fob computer. PocketBeagle features an incredible low cost, slick design and simple usage, making PocketBeagle® the ideal development board for beginners and professionals alike. You develop directly in a web browser and PocketBeagle® can easily be set back to factory conditions, leaving you free to experiment.
 512MB DDR3 RAM integrated
Integrated power management
2×32-bit 200-MHz programmable real-time units (PRUs)
ARM Cortex-M3


moduleID: Arduino Nano3
family: //obsolete//microcontroller board (arduino)
version: 5
replacedby: Arduino Nano3(fix)
fritzingversion: 0.5.2b.02.18.4756
author: Althaus
title: Arduino Nano (Rev3.0)
date: 2013-04-11
path: obsolete/Arduino Nano3.fzp
description:
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.



moduleID: SparkFun-DigitalIC-W5100-
family: sparkfun ethernet controller
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: LQFP-80
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-w5100-.fzp
description:
<h3>WIZnet W5100</h3>
TCP/IP PHY Embedded Chip<br>
See SparkFun catalog # COM-09471<br>
<br>
Package: <b>LQFP-80</b>,10x10mm,  0.4mm pitch


moduleID: JST-B3P-VH
family: jst vh pin header
version: 4
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen G. Parry
title: JST-B3P-VH
label: J
path: core/JST-B3P-VH.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">JST-B3P-VH</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">Male 3 pin header from JST VH series.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">The female partner connector (JST-VHR-3N) to this is used on Dagu motors in their robots. This part is not breadboard or stripboard friendly - the pin spacings are not properly compatible. However, you can make the part fit by drilling between the tracks for the outer connectors and soldering a trace across them. This can be represented in Frtizing using additional wires. This has the secondary benefit of increasing current carrying capacity.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Oxygen-Sans'; font-size:10pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">When plugging the female connector onto this, ensure that the correct connectors on the female have located.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Oxygen-Sans'; font-size:10pt;"><br /></p></body></html>


moduleID: HIH-4030_Breakout-v10
family: humidity breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Humidity Sensor - HIH-4030 Breakout
date: 2011-07-08
path: core/HIH-4030_Breakout-v10.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a breakout board for Honeywell&#39;s HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensor&#39;s near linear voltage output, the data is very easy to process.<br />


	<br />


	Voltage applied to the supply pins should be within 4-5.8VDC, and optimally at 5V. The sensor will typically only consume about 200&mu;A.<br />


	<br />


	This product comes as shown in the picture, with the HIH-4030 soldered onto the breakout board. The pins of the 3-pin header are spaced by 0.1&quot;.<br />


	<br />


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Near linear, analog output</li>


	<li>


		4-5.8VDC voltage supply</li>


	<li>


		All pins broken out to a 0.1&quot; pitch header</li>


	<li>


		Laser trimmed interchangeability</li>


	<li>


		Low power design, typical current draw of only 200&mu;A</li>


	<li>


		Enhanced accuracy</li>


	<li>


		Fast response time</li>


	<li>


		Stable, low drift performance</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 0.75 x 0.30 &quot; (19.05 x 7.62 mm)<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Weather/HIH-4030_Breakout-v10.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Weather/SEN-09569-HIH-4030-datasheet.pdf" name="" target="_blank">HIH-4030 Humidity Sensor Datasheet</a></li>


</ul>


moduleID: Memoire-1.0
family: snootlab shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Snootlab
title: Memoire 1.0 - SD card log shield
date: 2011-11-28
path: core/Memoire-1.0.fzp
description:
	<div id="idTab1" class="rte"><p>SD log shield with RTC and a square pads prototyping area for Arduino</p>



<p>&nbsp;</p>



<p><strong>SD Card support</strong></p>



<ul>



<li>Allows backup of a large amount of data on SD card and PC retrieval</li>



<li>Support SdFat library for SD FAT16/FAT32 SC/HC cards</li>



<li>3V3 regulator on the shield</li>



</ul>



<p>&nbsp;</p>



<p><strong>Real Time Clock</strong></p>



<ul>



<li>Adding date and time data based on the component I2C DS1307</li>



<li>Support the standard library DS1307</li>



<li>Date accessed using the format year / month / day of week / hour / minute / seconds</li>



<li>Time adjustable 12h with info AM / PM or 24H</li>



<li>Backup Time on lithium battery (lasting 10 years if 48mAh)</li>



<li>Corrections leap years, months with less than 31 days</li>



<li>SQW output signal (square wave) Programmable 1Hz (for pulse every second, or 4kHz or 8kHz or 32kHz)</li>



<li>Clock not subject to bug date before 100 years</li>



</ul>



<p>&nbsp;</p>



<p><strong>And more ...</strong></p>



<ul>



<li>Square pads prototyping area&nbsp;to add sensors, actuators, RF, ...</li>



<li>5V and GND lines available on the sides of the prototyping area</li>



<li>Arduino reset button on top</li>



<li>LED display available on pin D9</li>



<li>Simple modification provided for adapting the shield to an Arduino Mega</li>



</ul>



<p>&nbsp;</p>



<p>Compatible with Arduino Uno, Uno CMS and Duemilanove</p>



<p>Compatible with Arduino Mega with a simple modification</p>



<p>&nbsp;</p>



<p><img style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px; border: 0px initial initial;" title="Guide de montage" src="https://shop.snootlab.com/img/p/86-324.jpg" alt="Guide de montage" width="168" height="79" /></p>



<p>Documentation and installation guide : on going</p>



<p>&nbsp;</p>



<p>The official support forum: <a href="http://forum.snootlab.com" target="_blank">forum.snootlab.com</a></p>



<p>&nbsp;</p></div>



					<ul id="idTab9">



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=26">Assembly guide M&eacute;moire FR.pdf</a><br />Assembly guide of M&eacute;moire shield FR</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=28">Topside M&eacute;moire.pdf</a><br />Topside M&eacute;moire</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=29">Schema M&eacute;moire.pdf</a><br />Schema M&eacute;moire</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=30">Eagle M&eacute;moire.zip</a><br />Eagle files of M&eacute;moire</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=42">Manual M&eacute;moire EN.pdf</a><br />Assembly guide of M&eacute;moire shield EN</li>



				</ul>





<p>&nbsp;</p>





moduleID: AlphaNumericDisplay-v13
family: display
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Serial Alphanumeric Display Driver
date: 2011-07-08
path: core/AlphaNumericDisplay-v13.fzp
description:
<p>


	<strong>Description:</strong> The Serial Alphanumeric Display Driver allows you to communicate with alphanumeric displays over a simple SPI interface. Based on the A6282 IC, these boards work well with all of our alphanumeric displays and we have even provided a library listed below.</p>


<p>


	You can daisy-chain as many displays as you would like to create scrolling messages. Each board has both input and output headers that connect to each other. All you need to do is define the number of displays and your message. Check the example code below.</p>


<p>


	<strong>Note:</strong> This product includes only the carrier board. You will need to provide your own alphanumeric display. Check the related products below for ones that will work.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumericDisplay-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumericDisplay-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/SMD/A6282.pdf" target="_blank">Datasheet</a> (A6282)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumeric_Driver.pde">Example Arduino Code</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumeric_Driver-v13.zip">Arduino Library</a></li>


</ul>


moduleID: ludusProtoShieldWireless
family: sparkfun shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Ludus ProtoShield Wireless
date: 2015-11-04
path: core/ludusProtoShieldWireless.fzp
description:
SparkFun Ludus Protoshield Wireless

The SparkFun Ludus Protoshield Wireless is an Arduino compatible shield designed to make connecting motors and sensors to your Arduino-based development board as fast and easy as possible. This wireless Ludus is incredibly handy for throwing together remote control rovers and small autonomous robots. Simply attach this shield to your Arduino, attach an XBee, and you will be up and running in no time. The SparkFun Ludus Protoshield Wireless was developed by our Education department to help teach any interested individual the dynamics of wireless motor control through the Arduino IDE and was lovingly named after their very own mascot.



The heart of the Ludus ProtoShield Wireless is an H-Bridge Motor Driver. This allows the ProtoShield to drive two DC motors at once in both directions and brake electronically. The TB6612FNG H-Bridge Driver is rated up to 1.2A per channel at 13V which means it will drive a fair variety of hobby motors ranging in power. This Ludus board also features PWR and GND rails alongside the GPIO pins. Not only does this help you to avoid the common inconvenience of running out of GND and PWR pins, but because the pins are arranged with PWR in the center, plugging in servos is a snap! The PWR rail can even be switched between 5V (from the Arduino’s voltage regulator) and Vin using the on board slide switches. These features make the SparkFun Ludus Protoshield ideal for small rover-style robots.



This specific Ludus Protoshield includes an I2C pin-out and a built in XBee socket, making the Ludus ProtoShield Wireless perfect for setting up XBee based remote control. Simply plug an XBee module into the socket on the shield and you’re ready to transmit wireless data!


moduleID: 4071_4_x_2_input_OR_gate_multipart_subpart4
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4071 4 x 2 Input OR Gate, multi-part
label: 3
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4071_4_x_2_input_OR_gate_multipart_subpart4.fzp


moduleID: 4001_4_x_2_input_NOR_gate_multipart_subpart5
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4001 4 x 2 Input NOR Gate
label: 4
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4001_4_x_2_input_NOR_gate_multipart_subpart5.fzp


moduleID: 4070_4_x_2_input_XOR_gate_single
family: 40xx 4x2 input logic gate (single part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4070 4 x 2 Input XOR Gate, single part
label: U
taxonomy: part.dip.14.pins
path: core/4070_4_x_2_input_XOR_gate_single.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">4070 4 x 2 Input XOR Gate as a single part</span></p></body></html>


moduleID: A4950_f96ca75d4706a24394f9603716d558ed_37
family: motor driver
version: 4
fritzingversion: 0.7.2b
author: Steven Vogel
title: A4950
label: IC
path: core/A4950_37.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Full-Bridge DMOS PWM Motor Driver</p></body></html>


moduleID: 10x2-Epaper-Breakout-Board-v11
family: e-paper
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: E-Paper Eval Board
date: 2011-07-08
path: core/10x2-Epaper-Breakout-Board-v11.fzp
description:
<p>


	<strong>Description:</strong> E-paper displays are rad. But those 26-pin SMD connectors can be a real pain to solder, so we put together a breakout board to help you integrate this very cool technology into your next project. This board breaks out all of the major pins from the e-paper ribbon connector to a 0.1&quot; pitch header. Because the e-paper display requires a 35V supply, the breakout also includes a voltage step-up so that you can power the display using either 3.3V or 5V.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/10x2-Epaper-Breakout-Board-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/10x2-Epaper-Breakout-Board-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/LCD/Monochrome/WATN001002BFW00000000.pdf">Datasheet</a> (E-paper display)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Connectors/08630.pdf">Datasheet</a> (SMD Connector)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/LCD/Monochrome/ePaperDriver.zip" target="_blank">Example Code</a></li>


	<li>


		<a href="http://bildr.org/2011/06/epaper-arduino/" target="_blank">bildr Tutorial</a></li>


</ul>


moduleID: SparkFun-Connectors-ZUNE_CONNECTOR_MALE-
family: sparkfun zune connector
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: ZUNE_CONNECTOR_MALE
label: U
date: 2013-02-13
path: core/sparkfun-connectors-zune_connector_male-.fzp
description:
Male connector for the Zune media player.  UNPROVEN FOOTPRINT!  This connector must be used only with a 1.2mm PCB thickness.


moduleID: OBD-II-UART-v13
family: obd ii
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: OBD II UART
date: 2011-07-08
path: core/OBD-II-UART-v13.fzp
description:
<p>


	<strong>Description:</strong> This board allows you to interface with your car&#39;s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a footprint which mates directly to our FTDI Basic or a Bluetooth Mate. The DB9 connector mates with our DB9 to OBD-II cable listed below.</p>


<p>


	On-Board Diagnostics, Second Generation (OBD-II) is a set of standards for implementing a computer based system to control emissions from vehicles. It was first introduced in the United States in 1994, and became a requirement on all 1996 and newer US vehicles. Other countries, including Canada, parts of the European Union, Japan, Australia, and Brazil adopted similar legislation. A large portion of the modern vehicle fleet supports OBD-II or one of its regional flavors.</p>


<p>


	Among other things, OBD-II requires that each compliant vehicle be equipped with a standard diagnostic connector (DLC) and describes a standard way of communicating with the vehicle&rsquo;s computer, also known as the ECU (Electronic Control Unit). A wealth of information can be obtained by tapping into the OBD bus, including the status of the malfunction indicator light (MIL), diagnostic trouble codes (DTCs), inspection and maintenance (I/M) information, freeze frames, VIN, hundreds of real-time parameters, and more.</p>


<p>


	STN1110 is an OBD to UART interpreter that can be used to convert messages between any of the OBD-II protocols currently in use, and UART. It is fully compatible with the de facto industry standard ELM327 command set. Based on a 16-bit processor core, the STN1110 offers more features and better performance than any other ELM327 compatible IC.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Fully compatible with the ELM327 AT command set</li>


	<li>


		Extended ST command set</li>


	<li>


		UART interface (baud rates from 38 bps to 10 Mbps)</li>


	<li>


		Secure bootloader for easy firmware updates</li>


	<li>


		Support for all legislated OBD II protocols:


		<ul>


			<li>


				ISO 15765-4 (CAN)</li>


			<li>


				ISO 14230-4 (Keyword Protocol 2000)</li>


			<li>


				ISO 9141-2 (Asian, European, Chrysler vehicles)</li>


			<li>


				SAE J1850 VPW (GM vehicles)</li>


			<li>


				SAE J1850 PWM (Ford vehicles)</li>


		</ul>


	</li>


	<li>


		Support for non-legislated OBD protocols:


		<ul>


			<li>


				ISO 15765</li>


			<li>


				ISO 11898 (raw CAN)</li>


		</ul>


	</li>


	<li>


		Support for SAE J1939 OBD protocol</li>


	<li>


		Superior automatic protocol detection algorithm</li>


	<li>


		Large memory buffer</li>


	<li>


		Voltage input for battery monitoring</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/OBD-II-UART-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/OBD-II-UART-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/stn1110-ds.pdf" target="_blank">Datasheet</a> (STN1110)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MCP2551.pdf" target="_blank">Datasheet </a>(MCP2551)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/ELM327_AT_Commands.pdf" target="_blank">ELM327 Command Set</a></li>


	<li>


		<a href="http://scantool.imechatronics.com/downloads.htm" target="_blank">Compatible Software List</a></li>


</ul>


moduleID: SparkFun-DigitalIC-SCANTOOL-
family: sparkfun uart ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: SCANTOOL
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-scantool-.fzp
description:
<h1>STN1110 - Multiprotocol OBD II to UART Interpreter, QFN Package</h1>

<p>
<table>
  <tr><td><h2>Change Log</h2></td></tr>
  <tr>
    <th>Date</th><th>Author</th><th>Change</th>
  <tr>
    <td>Aug 23, 2010</td><td>vit@scantool.net</td><td>Created device</td>
  </tr>
 </tr>
</table>
</p>

<br />


moduleID: d63bf67236bb974ced6c30c1d9f152a9_18
family: motorola
fritzingversion: 0.7.0b.02.01.5801
author: Andre van Ooijen
title: MPX2010 pressure sensor
label: MPX2010
path: core/MPX2010 pressure sensor.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Sans Serif'; font-size:9pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">MPX2010 - MPXV2010G SERIES Motorola Preferred Device</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">10 kPa On-Chip Temperature Compensated &amp; Calibrated Silicon Pressure Sensors.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The MPX2010/MPXV2010G series silicon piezoresistive pressure sensors provide a very</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">accuate and linearvoltage output — directly proportional to the applied pressure.</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">These sensors house a single monolithic silicon die with the strain gauge and thin–film resistor network integrated on each chip.</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The sensor is laser trimmed for precise span, offset calibration and temperature compensation.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Features</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">• Temperature Compensated over 0°C to +85°C</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">• Ratiometric to Supply Voltage</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">• Differential and Gauge Options</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Application Examples</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">• Respiratory Diagnostics</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">• Air Movement Control</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">• Controllers</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">• Pressure Switching</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: 4077_4_x_2_input_XNOR_gate_multipart_subpart4
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4077 4 x 2 Input XNOR Gate, multi-part
label: 3
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4077_4_x_2_input_XNOR_gate_multipart_subpart4.fzp


moduleID: Camdenboss_CTB0158-3_5_08mm_pitch_90deg_terminals
family: ctb01x8
version: 5
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen Parry
title: Camdenboss CTB0158-3
label: J
path: core/Camdenboss_CTB0158-3_5_08mm_pitch_90deg_terminals.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Camdenboss CTB0158-3</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">5.08mm (0.2&quot;) Pitch Standard Profile 90 ̊  Rising Clamp Terminal, 3 pole</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The real-life connectors are modular, made up of two or three connector blocks slotted together. These can be further slotted together to make larger connectors.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fritzing part is derived from Screw terminals by Lionel Michel.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Because of the offset between connection pins and screw terminals, these are implemented male / female pairs of connectors with an internal connection.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: XBee-Regulated-v12
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: XBee Explorer Regulated
date: 2011-07-08
path: core/XBee-Regulated-v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with Arduino Pro boards for <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=122" name="" target="_blank">wireless bootloading</a> and USB based configuration.<br />


	<br />


	This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions. Plug an XBee into this breakout and you will have direct access to the serial and programming pins on the XBee unit and will be able to power the XBee with 5V.<br />


	<br />


	This board comes fully populated with 3.3V regulator (16V max input), XBee socket, four status LEDs, and a diode to allow 5V systems to communicate safely with the 3.3V XBees. This board does not include and XBee module. XBee modules sold below.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Zigbee/XBee-Regulated-v10.pdf" name="" target="_blank">Schematic<br />


		</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Zigbee/XBee-Regulated-v12.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.digi.com/support/kbase/kbaseresultdetl.jsp?kb=125" target="_blank">X-CTU Software</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/257" target="_blank">XBee Introduction and Buying Guide</a></li>


</ul>


moduleID: 4071_4_x_2_input_OR_gate_multipart_subpart1
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4071 4 x 2 Input OR Gate, multi-part
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4071_4_x_2_input_OR_gate_multipart_subpart1.fzp


moduleID: AnalogDevices_SSM2220S_subpart2
family: adi-transistor
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: SSM2220 - Audio Dual Matched PNP Transistor
label: 2
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/AnalogDevices_SSM2220S_subpart2.fzp


moduleID: Op Amp Breakout-v16
family: amplifier breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: OpAmp Breakout
date: 2011-07-08
path: core/Op Amp Breakout-v16.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/OpAmp_Breakout-v16.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://focus.ti.com/lit/ds/symlink/lmv324.pdf" target="_blank">LMV358 datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/OpAmp_Breakout-v16.zip" target="_blank">Eagle Files</a></li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8704">BOB-08704</a></p>


moduleID: 1e03b59c-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_11
author: Fritzing Part-o-matic
title: Mystery Part - 11 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.11pins
path: obsolete/mystery_part11.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 11 pins on a 100 mil inline pin header footprint.


moduleID: SparkFun-RF-EM408_OUTLINE-
family: sparkfun gps
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: EM408_OUTLINE
label: U
date: 2013-02-13
path: core/sparkfun-rf-em408_outline-.fzp
description:
This device is only the outline of the EM408 GPS receiver.  The device is intended to give the
designer an idea of what how the receiver will fit on the board.  THIS DEVICE DOES NOT PROVIDE ANY ELECTRICAL CONNECTION TO THE BOARD!  Include the EM408_CON device in order to connect the EM408 to your design.


moduleID: xbeeshield-v13
family: wireless shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino XBee Shield
date: 2011-07-08
path: core/xbeeshield-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This new revision fixes some minor spacing and labeling issues, but functionality remains the same.The XBee Shield simplifies the task of interfacing an XBee with your Arduino. This board mates directly with an <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_blank">Arduino Pro</a> or <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9950" target="_self">USB board</a>, and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. This is SparkFun&#39;s own design and is a distant relative to the official XBee Shield from Arduino.<br />


	<br />


	The serial pins (DIN and DOUT) of the XBee are connected through an SPDT switch, which allows you to select a connection to either the UART pins (D0, D1) or any digital pins on the Arduino (D2 and D3 default). Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN pin of the XBee.<br />


	<br />


	The board also includes LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee. The Arduino&#39;s reset button is brought out on the shield, and a 12x11 grid of 0.1&quot; holes are available for prototyping. The shield does not come with headers installed; we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>. The XBee module is also not included.<br />


	<br />


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Mounts directly onto your Arduino</li>


	<li>


		DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)</li>


	<li>


		3.3V power regulation and level shifting on-board</li>


	<li>


		12x11 grid of 0.1&quot; spaced prototyping holes</li>


	<li>


		Reset button brought out</li>


	<li>


		Power, DIN, DOUT, RSSI and DIO5 indicator LEDs</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/xbeeshield-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/xbeeshield-v13.zip" target="_blank">Eagle Files</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/9841">WRL-09841</a></p>


moduleID: Arduino_Micro_Rev03(fix)
family: microcontroller board (arduino)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Micro (Rev3)
date: 2013-04-03
path: core/Arduino_Micro_Rev03(fix).fzp
description:
The Arduino Micro is a microcontroller board based on the ATmega32u4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.



The Micro is similar to the Arduino Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page. 


moduleID: Dagu_DGServo_9g_Pan_and_tilt
family: dagu dgservo 9g
version: 4
fritzingversion: 0.12.34
author: Stephen Parry
title: Dagu DGServo 9g (Pan and tilt)
label: M
taxonomy: discreteParts.servo
path: core/Dagu DGServo 9g (Pan and tilt).fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Oxygen-Sans'; font-size:10pt;">Dagu DGServo 9g (Pan and tilt)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The breadboard view is rendered as non-perspective top projection for layout on stripboard or similar.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The inner circle indicates the turning circle of the base of the pan and tilt frame at about 16mm above board level if you fully recess the motor, 33mm if not.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The outer circle indicates the turning circle of the tilt part of the frame when at its greatest extent (41mm) at about 50mm if recessed, 67mm if not.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Further allowances will need to be made for any electronics mounted to the tilt frame.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The female header connector normally attached to end of the servo wires, exists in Fritzing as a separate part in the Dagu bin. Simply plug the connector onto whichever header pins you are using, then attach the wires to the connector.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: fc-51_85d98481ce3be6f2e9b641181c0f798b_1
family: line sensor
version: 4
fritzingversion: 0.9.3b
author: Peter Van Epp (vanepp in forums)
title: fc-51
label: M
path: core/fc-51-IR-Sensor.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fc-51 Infrared Obstacle Avoidance Proximity Sensor module. IR transmitter led, receiver LED, lm393 compaitor and a pot. 3.3 V to 5V power.</p></body></html>


moduleID: SparkFun-FreqCtrl-RESONATOR-PTH
family: sparkfun resonator
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Resonator
label: Y
date: 2013-02-13
path: core/sparkfun-freqctrl-resonator-pth.fzp
description:
<b>Resonator</b>
Small SMD resonator. This is the itty bitty 10/20MHz resonators with built in caps. CSTCE10M0G55 and CSTCE20M0V53. Footprint has been reviewed closely but hasn't been tested yet.


moduleID: SparkFun-DigitalIC-CP2103_USB_UART-
family: sparkfun usb ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Single-Chip USB to UART Bridge
label: IC
date: 2013-02-13
path: core/sparkfun-digitalic-cp2103_usb_uart-.fzp
description:
<b>Single-Chip USB to UART Bridge</b>
Source: www.silabs.com .. CP2103.pdf. Spark Fun Electronics SKU : COM-00309


moduleID: Rotary_Switch_12x1_6ea97bf52c0dd3f7e91820cbb831579b_2
family: switch
version: 2
fritzingversion: 0.4.1b.07.17.4356
author: gijs - Old Grey mod
title: Rotary_Switch_12x1
label: switch
path: core/Rotary_Switch_12x1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Rotary Switch 12 position 1 pole</p></body></html>


moduleID: AnalogDevices_OP27GPZ
family: adi-opamp
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: OP27 - Low Noise, Precision Op Amp
label: U
path: core/ADI_OP27.AnalogDevices_OP27GPZ.fzp
spice:
X{instanceTitle} {net connector3} {net connector2} {net connector7} {net connector4} {net connector6} OP27G


moduleID: MIDI_Shield-v13
family: music shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Midi Shield
date: 2011-07-08
path: core/MIDI_Shield-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The MIDI Shield board gives your Arduino access to the powerful <a classname="" href="http://en.wikipedia.org/wiki/Musical_Instrument_Digital_Interface" name="" target="_blank">MIDI communication protocol</a>, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI&#39;s event messages.<br />


	<br />


	The MIDI Shield provides an opto-isolated MIDI-IN port as well as a MIDI-OUT port. The MIDI Shield can be mounted directly on top of an Arduino, connecting the MIDI-IN to the Arduino&#39;s hardware RX pin and the MIDI-OUT to TX. Potentiometers are connected to analog pins 1 and 2, and can be used to control volume, pitch, tone or anything else you&#39;d like. Also connected on the shield are three momentary push buttons (connected to D2-4), a reset button, and green and red stat LEDs. The RUN/PROG switch allows you to program the Arduino over serial without having to remove the shield.<br />


	<br />


	<strong>Note:</strong> The MIDI Shield does not come with the through-hole MIDI connectors or trimpots soldered on. All of these components (2 MIDI connectors and 2 trimpots) are included with the product, however.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MIDI_Shield-v13.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Midi_Shield.zip" name="" target="_blank">Example Arduino Sketch</a></li>


	<li>


		<a classname="" href="http://arduino.cc/en/Tutorial/Midi" name="" target="_blank">Arduino MIDI Tutorial</a></li>


</ul>


moduleID: screwshield-v15
family: prototype shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino ProtoScrew Shield Kit
date: 2011-07-08
path: core/screwshield-v15.fzp
description:
<p>


	<strong>Description: </strong>The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=7914" target="_self">Arduino Protoshield</a>, including: a large prototyping space of both connected and unconnected 0.1&quot; spaced through-holes, a couple 5V and GND busses, a reset button, general use push button, and a 5mm yellow LED.</p>


<p>


	This product includes all the parts shown and comes in kit form and must be soldered together by the end user.</p>


<p>


	<strong>Kit Includes:</strong></p>


<ul>


	<li>


		1x ScrewShield PCB</li>


	<li>


		1x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9594" target="_self">5mm Yellow LED</a></li>


	<li>


		1x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8377" target="_self">330&Omega; Resistor</a></li>


	<li>


		2x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" target="_self">6-pin Stackable Headers</a></li>


	<li>


		2x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" target="_self">8-pin Stackable Headers</a></li>


	<li>


		2x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=97" target="_self">Momentary Push Buttons</a></li>


	<li>


		6x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8084" target="_self">2-pin 3.5mm Screw Terminals</a></li>


	<li>


		8x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8235" target="_self">3-pin 3.5mm Screw Terminals</a></li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/screwshield-v15.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://blog.makezine.com/archive/2011/04/blendophone-project-build-part-1.html" target="_blank">Maker Faire Project</a></li>


</ul>


moduleID: Calliope_mini_18e1f312913c8c9c43b618584bd40d02_10
family: calliope
version: 1
fritzingversion: 0.9.3b
author: Calliope gGmbH
title: Calliope Mini V 1.0
label: M
path: core/Calliope_mini_V_1_0.fzp
description:
Der Calliope mini ist ein Einplatinencomputer, der für Bildungszwecke entwickelt wurde und an deutschen Grundschuleneingesetzt werden soll. Ziel ist es, alle Schueler ab der dritten Klasse kostenlos mit einem Calliope mini auszustatten. Bei der Version 1.0 handelt es sich um eine nicht mehr erhältliche Version. Sie umterscheidet sich unter anderem durch den PIN-Header mit nur 5 Anschlüssen.


moduleID: AnalogDevices_OP37GPZ
family: adi-opamp
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: OP37 - Low Noise, Precision, High Speed Op Amp
label: U
path: core/ADI_OP37.AnalogDevices_OP37GPZ.fzp
spice:
X{instanceTitle} {net connector3} {net connector2} {net connector7} {net connector4} {net connector6} OP37G


moduleID: 145b5412a0ffbe91a876166139419e15
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2sx
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2sx.fzp
description:
The BASIC Stamp 2sx serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: SparkFun-PowerIC-V_REG_LD1085-D2
family: sparkfun voltage regulator
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: V_REG_LD1085
label: U
date: 2013-02-13
path: core/sparkfun-poweric-v_reg_ld1085-d2.fzp
description:
<h3>LD1085 3A low-drop positive voltage regulator, adjustable</h3>

The LD1085xx is a low drop voltage regulator able to provide up to 3 A of output current. Dropout is guaranteed at a maximum of 1.2 V at the maximum output current, decreasing at lower loads. The LD1085xx is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance.<br>
<br>
<B>Available Packages</b>
<ul><li>D<sup>2</sup>PAK/A - 3-pin w/ tabs, SMD


moduleID: 4081_4_x_2_input_AND_gate_multipart_subpart1
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4081 4 x 2 Input AND Gate, multi-part
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4081_4_x_2_input_AND_gate_multipart_subpart1.fzp


moduleID: Arduino_Leonardo_Rev3(fix)
family: microcontroller board (arduino)
version: 5
fritzingversion: 0.5.2b.02.18.4756
author: althaus
title: Arduino Leonardo (Rev3b)
date: 2013-04-03
path: core/Arduino_Leonardo_Rev3(fix).fzp
description:
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.



The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page. 


moduleID: SparkFun Load Sensor Combinator
family: sparkfun breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: joev.noise
title: SparkFun Load Sensor Combinator
date: 2015-10-31
path: core/SparkFun Load Sensor Combinator.fzp
description:
SparkFun Load Sensor Combinator

The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard 4-wire wheatstone configuration. If you open up an electronic bathroom scale you’ll find a large rats nest of wires. The Load Sensor Combinator was created to combine the 12 wires found in a bathroom scale into the standard 4-wire wheatstone bridge configuration.



You can either use four individual load sensors or simply purchase an off-the-shelf bathroom scale and hacking the combinator into it rather than trying to design a base to properly mount four load sensors.



This board works great with our Load Cell Amplifier breakout board; the five pins on the edge of the combinator line up directly to the five pins on the amplifier.



If your amplifier and supporting electronics are more than a few inches away from the scale an RJ45 footprint is provided. The four wheatstone pins (E+/E-/S+/S-) as well as the shield pin are connected to twisted pairs within a standard cheap Ethernet cable. This allows the amplifier board to be placed many feet away from the scale itself.



The combinator board also includes a footprint for the DS18B20 one wire temperature sensor. This allows the user to gather the temperature of the scale in case there is a large variance between the scale and the amplifier. These three pins are accessed through the RJ45 connection as well allowing remote temperature readings to be gathered over one twisted pair Ethernet cable.


moduleID: RFM23BP_83dca743edce69d8624555bae587be66_7
family: //obsolete//lehoop
version: 4
replacedby: RFM23BP
fritzingversion: 0.5.2b.02.18.4756
author: le hoop
title: RFM23BP
path: obsolete/RFM23BP_83dca743edce69d8624555bae587be66_7.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Description: </span><span style=" font-family:'sans-serif'; font-size:15px;">HopeRF's RFM23BP are highly integrated, low cost,433/868/915MHZ </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">wireless ISM transceivers module. </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">The low receive sensitivity</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif';">(–120dBm) </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">coupled with industry leading +30dBm output power ensures </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif';">extended </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">range and </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">improved link performance. Built-in antenna diversity and </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">support for frequency hopping can be us</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">ed to further extend range and enhance </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">performance. </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">Additional system features such as </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">an automatic </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">wake-up </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">timer, low </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">battery detector, 64 byte TX/RX FIFOs, </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">automatic packet handling, and preamble </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">detection reduce overall current consum</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">ption and allow the use of lower-cost </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">system MCUs. An integrated temperatur</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">e sensor, general purpose ADC, power- </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">on-reset (POR), and GPIOs further reduce overall system cost and size. </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">The RFM23BP digital receive archit ec</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">ture features a high-performance ADC </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">and DSP based modem which performs dem</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">odulation, filtering, and packet </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">handling for increased flexibility and performance. The direct digital transmit </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">modulation and automatic PA power rampin</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">g ensure precise transmit modulation </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">and reduced spectral spreading ensuring compliance with global regulations </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">including FCC, ETSI. </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">An easy-to-use calculator is provided </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">to quickly configure the radio settings, </span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'sans-serif'; font-size:15px;">simplifying customer's system design and reducing time to market.</span></p></body></html>


moduleID: onoffshim_85f2f08e565750030faf26f30b4ef33c_1
family: pimoroni shim
version: 1
fritzingversion: 0.9.3b
author: Boris Tékaty
title: Pimoroni OnOffShim
label: onoffshim
path: core/onoffshim_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Tiny yet convenient power switch and control board to Raspberry Pi</p></body></html>


moduleID: c624c0ff7a2eb1ca7994123ee87f58fb
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 1
label: BS
date: 2010-04-12
path: core/BASIC_Stamp_1.fzp
description:
It's amazing what you can accomplish with this well-proven microcontroller and its simple PBASIC 1 language.  All vital components (processor, clock source, memory, power regulator) are provided on the BS1's tiny PCB; just connect power and go!  The BASIC Stamp 1 (BS1-IC) is an ideal fit for applications that don't require the speed, I/O, and memory of the BASIC Stamp 2 series of microcontrollers.


moduleID: SparkFun-RF-ET312-SMD
family: sparkfun gps
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: ET312 GPS Receiver
label: U
date: 2013-02-13
path: core/sparkfun-rf-et312-smd.fzp
description:
<b>ET312 GPS Receiver</b>
Proven layout and schematic for SiRF III ET312 GPS receiver. This footprint has been tweaked significantly to work with the ET312. This footprint has been fully qualified. Spark Fun Electronics SKU : GPS-08268.


moduleID: RGB_matrix_v25
family: display
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LED Matrix - Serial Interface - Red/Green/Blue
date: 2011-07-08
path: core/RGB_matrix_v25.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a large sized RGB LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics you pass it. All the refreshing and communication control is taken care of by the backpack. It&#39;s even reprogrammable! 7 software selectable colors are available!<br />


	<br />


	Unit comes with a Red/Green/Blue LED Matrix assembled with a RGB Matrix Backpack Controller.<br />


	<br />


	Check out the <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=91" name="" target="_blank">LED Coffee Table</a> tutorial!<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/rgbmatrixbackpack_userguide.pdf" name="" target="_blank">Matrix Backpack Controller Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/RGB_Backpack_v4.zip" name="" target="">RGB Serial Matrix Firmware</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/RGB_Sample_Interface_Code.zip" name="" target="">Sample Interface Code</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/RGBMatrixBackpackSketch.zip" name="" target="_blank">Sample Arduino Sketch</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/RGB_matrix_v25.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/YSM-2388CRGBC.pdf" name="" target="_blank">Triple Color LED Matrix Datasheet</a></li>


</ul>


<p>


	<span style="font-weight: bold;">Example Projects:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/LED_MATRIX_CODE.zip" target="_blank">Example Software for older RGB Serial Matrix</a></li>


	<li>


		<a classname="" href="http://wiring.org.co/learning/basics/rbgbackpack.html" name="" target="_blank">Wiring Example</a></li>


	<li>


		<a href="http://www.nokinomo.com/films/films.php?Id=13" target="_blank">Example deployment</a> by Nokinomo</li>


	<li>


		<a classname="" href="http://www.youtube.com/watch?v=hEKEM6ZOsZE" name="" target="_blank">Example Project</a> by Mr. Nick Hall</li>


	<li>


		<a classname="" href="http://www.halfmachine.dk/posts/60" name="" target="_blank">Ladies and Mens Room Mixup</a> by Vanessa Carpenter</li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/44">Ethernet LED Matrix</a> tutorial by Owen Osborn</li>


</ul>


<p>


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		2.38x2.38&quot; square</li>


	<li>


		Max width of backpack including connector pins - 1.1&quot;</li>


</ul>


moduleID: 5cc9de9cdfa593d8e073514cde1c7c77
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2px24
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2px24.fzp
description:
The BASIC Stamp 2px24 serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: MPX4250AP_60bfc397c54bae166e67461339be2ca8_4
family: motorola
fritzingversion: 0.7.0b.02.01.5801
author: Andre van Ooijen - Old Grey mod
title: MPX4250AP pressure sensor
label: MPX4250AP
path: core/MPX4250AP pressure sensor.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">MPX4250AP - MPX4250A SERIES Motorola Preferred Device</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Integrated Silicon Pressure Sensor</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Manifold Absolute Pressure Sensor</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">On-Chip Signal Conditioned,</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Temperature Compensated and</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Calibrated</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">The MPX4250A series piezoresistive transducer is a state-of-the-art</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">monolithic silicon pressure sensor designed for a wide range of applications,</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">particularly those employing a microcontroller or microprocessor with A/D</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">inputs. This transducer combines advanced micromachining techniques, thinfilm</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">metallization and bipolar processing to provide an accurate, high-level</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">analog output signal that is proportional to the applied pressure. The small</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">form factor and high reliability of on-chip integration make the Freescale</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">sensor a logical and economical choice for the automotive system engineer.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Features</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• 1.5% Maximum Error Over 0° to 85°C</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Specifically Designed for Intake Manifold Absolute Pressure Sensing in Engine Control Systems</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Patented Silicon Shear Stress Strain Gauge</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Temperature Compensated Over -40° to +125°C</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Offers Reduction in Weight and Volume Compared to Existing Hybrid Modules</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Durable Epoxy Unibody Element or Thermoplastic Small Outline, Surface Mount Package</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Ideal for Non-Automotive Applications</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">10 kPa On-Chip Temperature Compensated &amp; Calibrated Silicon Pressure Sensors.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">The MPX2010/MPXV2010G series silicon piezoresistive pressure sensors provide a very</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">accuate and linearvoltage output — directly proportional to the applied pressure.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">These sensors house a single monolithic silicon die with the strain gauge and thin–film resistor network integrated on each chip.</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">The sensor is laser trimmed for precise span, offset calibration and temperature compensation.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Features</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Temperature Compensated over 0°C to +85°C</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Ratiometric to Supply Voltage</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Differential and Gauge Options</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">Application Examples</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Respiratory Diagnostics</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Air Movement Control</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Controllers</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Sans Serif'; font-size:9pt;">• Pressure Switching</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:'Sans Serif'; font-size:9pt;"><br /></p></body></html>


moduleID: LM239_383e0df5e7311423c672919352eb812d_8_subpart1
family: lm2xx 4x4 input quad comparator
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by Chad Braham april 2019) (vanepp cleaned up added subparts april 2019)
title: Quad Comparator
label: 1
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/LM239_383e0df5e7311423c672919352eb812d_8_subpart1.fzp


moduleID: SparkFun-Sensors-QRB1114-
family: //obsolete//sparkfun reflective object sensor
version: 4
replacedby: SparkFun-Sensors-QRB1114-2
fritzingversion: 0.7.2b
author: www.fritzing.org
title: PHOTOTRANSISTOR REFLECTIVE OBJECT SENSOR
label: Q
date: 2013-02-13
path: obsolete/sparkfun-sensors-qrb1114-.fzp
description:
<b>PHOTOTRANSISTOR REFLECTIVE OBJECT SENSOR</b>
<p>
The QRB1113/1114 consists of an infrared emitting diode and an NPN silicon phototransistor mounted side by side on a converging
optical axis in a black plastic housing. The phototransistor responds to radiation from the emitting diode only when a reflective
object passes within its field of view. The area of the optimum response approximates a circle .200 in diameter.
<p>Datasheet: http://www.sparkfun.com/datasheets/Sensors/QRB1114.pdf
<p>MAX RATINGS:
<p>EMITTER
<br>Continuous Forward Current (IF) 50 mA
<br>Reverse Voltage (VR) 5 V
<br>Power Dissipation (PD) 100 mW
<p>SENSOR
<br>Collector-Emitter Voltage (VCEO) 30 V
<br>Emitter-Collector Voltage (VECO) 4.5 V
<br>Collector Current 20 mA
<br>Power Dissipation (PD) 100 mW


moduleID: SparkFun-LED-LED_RING-
family: sparkfun led (ring)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: LED_RING
label: LED
date: 2013-02-13
path: core/sparkfun-led-led_ring-.fzp
description:
<h3>16 LED Ring</h3>
COM-10595<br>
http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Components/LED/Top-Up%20LED%20Ring%20LED-CCL-A.pdf


moduleID: TalonSRX_1
family: frc
version: 4
fritzingversion: fritzingVersion=0.9.3b
author: Nitay Megides (modified by vanepp july 2019)
title: Talon SRX
label: Mod
path: core/TalonSRX_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Cross The Road Electronics Talon SRX Motor controller. Input voltage nominal 12 V (6 - 26V) at up to 60A. Drives one motor, and is controlled from the CAN bus.</p></body></html>


moduleID: RioRand_LM2596_94ce9810d0922bc731e2f315085d46ab_1
family: converter
version: 4
fritzingversion: 0.9.3b
author: Jenny Madorsky (modified by Peter Van Epp)
title: RioRand LM2596
label: M
path: core/RioRand_LM2596_94ce9810d0922bc731e2f315085d46ab_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Step-down DC-DC Converter</p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">
(modified to correct all views by Peter Van Epp january 2018)</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Corrected the pins so the part works in all views. Changed the sizes in bb and pcb to match the data sheet. PCB view had a small outline (possibly only for wires), changed it to pads in the same places as the module and added holes in the PCB silkscreen layer where the mounting holes on the module are (you need to check the alignment though as they are not fully specified on the drawing I used and I don't have one ...). so that you could mount the module on standoffs on a board. The mounting holes are only on silksceen, you need to drag a hole of the correct size over them if you want a hole in the actual board.</p><></body></html>


moduleID: LED-SMD_RGB(WS2812)
family: sparkfun led
version: 4
fritzingversion: 0.7.2b
author: fabian althaus
title: SMD RGB LED (WS2812)
label: RGB SMD LED
date: 2013-09-17
path: core/sparkfun-led-WS2812.fzp
description:
The WS2812 is an RGB LED with a WS2811 control IC built right into the LED. This really blew our minds to see the control IC of an individually addressable RGB LED was moved into the actual LED, so we wanted to offer this amazing product to you! They're great when you need a lot of color from not a lot of board space, now more so than ever.


moduleID: SparkFun-DiscreteSemi-TVS-
family: sparkfun diode (tvs)
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: TVS
label: U
date: 2013-02-13
path: core/sparkfun-discretesemi-tvs-.fzp
description:
Transient voltage suppressor- prevents ESD on inputs.<br>
Ignore package description- MBRA140 is NOT this type of part!!!


moduleID: LilyPad-XBee-v15
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: LilyPad XBee
date: 2013-05-25
path: core/LilyPad-XBee-v15.fzp
description:
The LilyPad XBee is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

LilyPad XBee was co-developed by Kate Hartman and Rob Faludi. It works with all the popular XBee module types but does not ship with a module. Please see the related items below.

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and to Rob Faludi and Kate Hartman for product support and continued development.

Dimensions:

50mm outer diameter
Thin 0.8mm PCB


moduleID: 1e03b5a6-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_4
author: Fritzing Part-o-matic
title: Mystery Part - 4 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.4pins
path: obsolete/mystery_part4.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 4 pins on a 100 mil inline pin header footprint.


moduleID: 1e03b59d-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_8
author: Fritzing Part-o-matic
title: Mystery Part - 8 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.8pins
path: obsolete/mystery_part8.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 8 pins on a 100 mil inline pin header footprint.


moduleID: 96boards_CE_fixed
family: cpu board (96boards)
version: 2
fritzingversion: 0.9.0b.04.10.5970
author: Ricardo Salveti fixed by f.althaus
title: 96boards Consumer Edition
label: 96boards CE
path: core/96boards_CE.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Ubuntu'; font-size:11pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">96boards is the first open specification to define a platform for the delivery of compatible low-cost, small footprint 32-bit and 64-bit Cortex-A boards from the range of ARM SoC vendors. Standardized expansion buses for peripheral I/O, display and cameras allow the hardware ecosystem to develop a range of compatible add-on products that will work on any 96Boards product over the lifetime of the platform.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This part includes the low expansion headers for the Consumer Edition specification.</p></body></html>


moduleID: LilyPad-slide-switch13
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Fabian Althaus
title: LilyPad Slide Switch
date: 2013-05-26
path: core/LilyPad-slide-switch13.fzp
description:
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

Dimensions:

7.75x18.1mm
Thin 0.8mm PCB


moduleID: ADXL345-BreakoutBoard-v13
family: accelerometer breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Triple Axis Accelerometer Breakout - ADXL345
date: 2011-07-08
path: core/ADXL345-BreakoutBoard-v13.fzp
description:
<p>


	<b>Description:</b> This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to &plusmn;16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.&nbsp;</p>


<p>


	The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0&deg;.</p>


<p>


	Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		2.0-3.6VDC Supply Voltage</li>


	<li>


		Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V</li>


	<li>


		Tap/Double Tap Detection</li>


	<li>


		Free-Fall Detection</li>


	<li>


		SPI and I2C interfaces</li>


</ul>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345-BreakoutBoard-v13.pdf" target="_blank"> Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345-BreakoutBoard-v13.zip">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345.pdf" name="" target="_blank"> Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/240" target="_blank">Quickstart Guide</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345-talktest.zip" name="" target="_blank">Example Code</a> (ATmega328)</li>


	<li>


		<a href="http://bildr.org/2011/03/adxl345-arduino/" target="_blank">Bildr Tutorial </a></li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/products/9156" target="_blank">SEN-09156</a></p>


moduleID: prefix0000_SFE-SEN-11084_05654ad87c1390d7ff5c5e6a1ba23294_6
family: //obsolete//weather
version: 4
replacedby: MPL3115A2
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun and Fritzing Part-o-matic
title: Altitude/Pressure Sensor - MPL3115A2 Breakout
label: Part
path: obsolete/prefix0000_SFE-SEN-11084_05654ad87c1390d7ff5c5e6a1ba23294_6.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This breakout board makes it easy to prototype using this tiny device by breaking out the necessary pins to a standard 0.1&quot; spaced header. The board also has all of the passive components needed to get the device functioning, so you can simply connect it to something that talks I2C and get to work!</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Features:</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1.95V to 3.6V Supply Voltage, internally regulated by LDO</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1.6V to 3.6V Digital Interface Supply Voltage</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fully Compensated internally</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Direct Reading, Compensated</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Pressure: 20-bit measurement (Pascals)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Altitude: 20-bit measurement (meters)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Temperature: 12-bit measurement (degrees Celsius)</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Programmable Events</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Autonomous Data Acquisition</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Resolution down to 1 ft. / 30 cm</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">32 Sample FIFO</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Ability to log data up to 12 days using the FIFO</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1 second to 9 hour data acquisition rate</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">I2C digital output interface (operates up to 400 kHz)</p></body></html>


moduleID: SparkFun-RF-SI4700-SMD
family: sparkfun fm receiver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: Silicon Labs FM Receiver
label: U
date: 2013-02-13
path: core/sparkfun-rf-si4700-smd.fzp
description:
<b>Silicon Labs FM Receiver</b><p>
76-108 MHz FM band support with integrated VCO, automatic gain control, automatic frequency control and seek tuning.


moduleID: Camdenboss_CTB0158-11_5_08mm_pitch_90deg_terminals
family: ctb01x8
version: 5
fritzingversion: 0.2.2.b.03.04.2550
author: Stephen Parry
title: Camdenboss CTB0158-11
label: J
path: core/Camdenboss_CTB0158-11_5_08mm_pitch_90deg_terminals.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Camdenboss CTB0158-11</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">5.08mm (0.2&quot;) Pitch Standard Profile 90 ̊  Rising Clamp Terminal, 11 pole</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The real-life connectors are modular, made up of two or three connector blocks slotted together. These can be further slotted together to make larger connectors.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Fritzing part is derived from Screw terminals by Lionel Michel.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Because of the offset between connection pins and screw terminals, these are implemented male / female pairs of connectors with an internal connection.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p></body></html>


moduleID: AMPHENOL-ACJS-MHDR
family: jack
version: 4
fritzingversion: 0.12.34
author: Fabian Althaus
title: AMPHENOL - ACJS-MHDR
label: AMPHENOL - ACJS-MHDR - JACK, 6.35MM
taxonomy: part.dip.6.pins
path: core/AMPHENOL-ACJS-MHDR.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-family:'Helvetica Neue,Helvetica,sans-serif'; font-size:13px; color:#222222; background-color:#ffffff;">AMPHENOL - ACJS-MHDR - JACK, 6.35MM, PCB, STEREO)</span></p></body></html>


moduleID: SparkFun-DigitalIC-ATMEGA8U2-AU
family: microcontroller
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: ATMEGA8U2
label: U
date: 2013-02-13
path: core/sparkfun-digitalic-atmega8u2-au.fzp
description:
Atmel 32-pin 8-bit Microcontroller with 8/16/32K Bystes of ISP Flash and USB Controller. ATmega8U2, ATmega16U2, and ATmega32U2


moduleID: IR_Receiver_v14
family: ir
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: IR Receiver Breakout
date: 2011-07-08
path: core/IR_Receiver_v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation built into the unit. Simply point a IR remote at the receiver, hit a button, and you&#39;ll see a stream of 1s and 0s out of the data pin.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Infrared/tsop853.pdf" name="" target="_blank">Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Infrared/IR-Receiver-Schematic.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://en.wikipedia.org/wiki/Consumer_IR" target="_blank">Consumer IR Information</a></li>


</ul>


moduleID: Lilypad_PowerSupply-v18
family: microcontroller board (lilypad)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: f.althaus
title: Lilypad Power Supply
date: 2013-05-26
path: core/Lilypad_PowerSupply-v18.fzp
description:
A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad circuit. Good up to 200mA. Short circuit protected.

This board has AAA battery clips but can use an input from 1.2V to 5V. Our lithium polymer batteries are a good, rechargeable alternative.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.
Dimensions:56x26mm
Thin 0.8mm PCB


moduleID: SparkFun-Electromechanical-AYZ0202-
family: sparkfun slide switch
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: SPDT Slide Switch
label: U
date: 2013-02-13
path: core/sparkfun-electromechanical-ayz0202-.fzp
description:
<b>SPDT Slide Switch</b>
Simple SMD single-pull double-throw slide switch. Good for  less than 350mA power switch, switching UARTs between devices, etc. Spark Fun Electronics SKU : COM-00597


moduleID: Modkit Shield-v1a
family: motor shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Modkit Shield
date: 2011-07-08
path: core/Modkit Shield-v1a.fzp
description:
<p>


	<strong>Description:</strong> The Modkit MotoProto Shield for Arduino that makes it easy to connect up to 4 sensors and control two DC motors as well as a 16X2 character LCD. The sensor jacks accept 2.5mm cables and provide access to VCC, GND, and an analog input.</p>


<p>


	Sensors can be soldered to a 2.5mm cable and you can begin plug-and-play prototyping with a wide assortment of our sensors including line sensors, ultrasonic distance sensors, light sensors, photo interrupter, etc. There is also a large programmable button and a space for an i2c header to connect more advanced sensors such as an accelerometer.</p>


<p>


	The motor driver circuit is based on the L298 H-bridge and can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF.</p>


<p>


	<a href="http://modk.it" target="_blank">Modkit</a> develops a drag-and-drop graphical programming environment inspired by <a href="http://scratch.mit.edu" target="_blank">Scratch</a> for <a href="http://arduino.cc" target="_blank">Arduino</a> and Arduino compatible boards, making it easier than ever to program your physical project. The Modkit MotoProto Shield is well suited for general projects, prototyping, and educational robotics.<br />


	<br />


	For a limited time, purchase a Modkit MotoProto Shield and receive a free invite to try Modkit&#39;s programming environment before it is released to the public. The shield can also be programmed with the Arduino development environment.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Modkit%20Shield-v1a.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Modkit Shield-v1a.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MotoProto_LCD.zip" target="_blank">Example Code</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/General/L298N.pdf" target="_blank">Datasheet</a> (L298)</li>


	<li>


		<a href="http://www.modk.it/software" target="_blank">Modkit Software</a></li>


</ul>


moduleID: AnalogDevices_SSM2212RZ_subpart3
family: adi-transistor
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: SSM2212 - Audio Dual Matched NPN Transistor
label: 3
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/AnalogDevices_SSM2212RZ_subpart3.fzp


moduleID: 1e03b5a2-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_16
author: Fritzing Part-o-matic
title: Mystery Part - 16 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.16pins
path: obsolete/mystery_part16.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 16 pins on a 100 mil inline pin header footprint.


moduleID: Wireless_SD_v3
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Arduino
title: Arduino Wireless SD Shield
date: 2012-03-10
path: core/Wireless_SD_v3.fzp
description:
The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad.

Included on board is a SD card slot. When using the SD Library to access the card, Pin 4 is CS and cannot be used otherwise. SPI also relies on pins 11, 12, and 13 for communication.

Also on board is a switch allowing for control via USB or the microcontroller.


moduleID: 1e03b59e-ed62-11dd-b332-001a4d5c439f
family: //obsolete//mystery part
version: 1
replacedby: mystery_part_9
author: Fritzing Part-o-matic
title: Mystery Part - 9 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.9pins
path: obsolete/mystery_part9.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 9 pins on a 100 mil inline pin header footprint.


moduleID: AnalogDevices_OP482GPZ
family: adi-opamp-quad
version: 1
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: OP482 - Low Power, High Speed JFET Quad Operational Amplifier
label: U
path: core/ADI_OP482.AnalogDevices_OP482GPZ.fzp
spice:
X{instanceTitle}A {net connector3} {net connector2} {net connector4} {net connector11} {net connector1} OP482


moduleID: atlas-sientific_FLO-30 Circuit
family: flow
fritzingversion: 0.4.1b.07.17.4356
author: Atlas Scientific
title: FLO-30 Circuit
label: FLO-30 Circuit
path: core/atlas-sientific_FLO-30 Circuit.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">Reading liquid flow may not appear to be such a challenge to the embedded systems engineer. It certainly seems easy enough to do, however, as the saying goes, 'the devil is in the details'. In order to achieve true scientific grade liquid flow readings you simply cannot just count pulses.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">The FLO-30 Flow Meter Circuit has been designed around quality components. The flow meters that the FLO-30 can interface with are of the highest quality. The firmware on the FLO-30 Flow Meter Circuit is a very fast, real time operating system capable of managing the complex timing events needed to accurately read and report flow rates without ever missing a beat.</span></p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Supports 3 types of flow meter</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• TurboFlow-226000 Polypropylene: 800 ml/min to 7.6 LPM</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">   Accurate to ± 1mL/min</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• RotoFlow-155421 Polypropylene: 15.14 LPM to 75.70  LPM</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">   Accurate to ± 5mL/min</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• RotoFlow-194761 Brass: 11.35 LPM to 113.56 LPM</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">   Accurate to ± 15mL/min</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Scientific grade results</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Food Safe</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Gasoline Safe</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Diesel Safe</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Kerosene Safe</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Calculates total volume flow, L/minute, L/hour</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Enable/disable flow meter</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Flow indicator LED blinks with each turn of the flow meter</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Built in total volume flow alarm</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Single reading or continuous reading modes</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple asynchronous serial connectivity (voltage swing 0-VCC)</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Simple instruction set consisting of only 12 commands</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Micro footprint circuitry</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Debugging LED's</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• 2.5V to 5.5V operational voltage</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Low power consumption</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-size:8pt;">• Dimensions: 14mm X 20.3mm (0.55&quot; X0.79&quot;)</span></p></body></html>


moduleID: AnalogDevices_AD8226ARZ
family: adi-inamp
version: 4
fritzingversion: 0.7.12b.02.13.6882
author: Analog Devices
title: AD8226 - Rail-to-Rail output Instrumentation Amplifier
label: U
path: core/ADI_AD8226.AnalogDevices_AD8226ARZ.fzp
spice:
X{instanceTitle} {net connector1} {net connector2} {net connector3} {net connector4} {net connector5} {net connector6} {net connector7} {net connector8} AD8226


moduleID: 4011_4_x_2_input_NAND_gate_multipart_subpart5
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4011 4 x 2 Input NAND Gate, multi-part
label: 4
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4011_4_x_2_input_NAND_gate_multipart_subpart5.fzp


moduleID: bareconductive_touchboard
family: microcontroller board
version: 5
fritzingversion: 0.9.0b.02.18.4756
author: pedro cushe and fabian althaus
title: Bare Conductive Touch Board
path: core/bareconductive_touchboard.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'.Lucida Grande UI'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Touch Board is a microcontroller board based on the ATmega32u4.</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">Use the Touch Board to change the world around you by turning almost any material or surface into a sensor. Connect anything conductive to one of its 12 electrodes and trigger a sound via its onboard MP3 player, play a MIDI note or do anything else that you might do with an Arduino or Arduino-compatible device.</p>
<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><br /></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The Touch Board is designed as an easy-to-use platform for a huge range of projects, whether it’s painting a lightswitch on your wall, making a paper piano or creating a custom interactive surface.</p></body></html>


moduleID: SparkFun-Connectors-EM406-
family: sparkfun gps receiver
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: EM406 GPS Connector
label: U
date: 2013-02-13
path: core/sparkfun-connectors-em406-.fzp
description:
<b>EM406 GPS Connector</b>
Proven layout and schematic for EM406 connector. Spark Fun Electronics SKU : GPS-00579


moduleID: cellular shield-v12
family: cellular shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Cellular Shield
date: 2011-07-08
path: core/cellular shield-v12.fzp
description:
<p>


	<strong>D</strong><span style="font-weight: bold;">escription: </span>The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9533" name="" target="_self">SM5100B</a> cellular module. This allows you to easily add SMS, GSM/GPRS, and TCP/IP functionalities to your Arduino-based project. All you need to add cellular functionality to your Arduino project is a SIM card (pre-paid or straight from your phone) and an antenna and you can start sending Serial.print statements to make calls, send texts and serve web pages!</p>


<p>


	&nbsp;The main components of the Cellular Shield are a 60-pin <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9535" name="" target="_self">SM5100B connector</a>, a <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=548" name="" target="_self">SIM card socket</a>, and an SPX29302 voltage regulator configured to regulate the Arduino&#39;s raw voltage to 3.8V. The board&#39;s red LED indicates power. The Arduino&#39;s reset button is also brought out on the shield.<br />


	<br />


	Two solder jumpers on the board allow you to select which serial pins interface with the cellular module - software (D2, D3) or hardware (D0, D1). There is also a 5-pin, 0.1&quot; spaced header with connections for microphone inputs and speaker outputs. Headers are not soldered on, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	The SM5100B cellular module <span style="font-style: italic;">is</span> included with this product, however an antenna is not. It is pre-configured to 9600bps.<br />


	<br />


	<span style="font-weight: bold;"><span style="font-weight: bold;">Documents:</span></span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/cellular%20shield-v12.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/Cellular_Shield_Passthrough.zip" name="" target="_blank">Sample Sketch</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/CellularShield/SM5100B%20Datasheet.pdf" name="" target="_blank">SM5100B Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/CellularShield/SM5100B%20AT%20Command%20Set.pdf" name="" target="_blank">SM5100B AT Command Set</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/CellularShield/SM5100B%20SMS%20App%20Note.pdf" name="" target="_blank">SM5100B SMS App Note</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/CellularShield/SM5100B%20TCPIP%20App%20Note.pdf" name="" target="">SM5100B TCP/IP App Note</a></li>


	<li>


		<a href="http://tronixstuff.wordpress.com/2011/01/19/tutorial-arduino-and-gsm-cellular-part-one/" target="_blank">Arduino Tutorial</a></li>


</ul>


moduleID: blueIOT_Rc1-final
family: microcontroller board (blueiot)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: joev
title: blueIOT core
date: 2014-10-03
path: core/blueIOT_Rc1-final.fzp
description:
Painting the Internet of Things Blue. blueIOT is an tiny little board in the size of an SD Card which comes with latest sensors for

measuring acceleration (3 axis), humidity, altitude and temperature. The integrated Bluetooth Low Energy (BLE) module is certified 

and allows easy communication with smartphones and home gateways. All this runs with a single coin cell battery at 3V while consuming

in average 1uA in managed sleep mode. All this is a perfect basis for wearable, fitness tracker, beacons for in door navigation and 

more. Programming is supported with the Arduino IDE using an FTDI cable. For development there is an SD card slot for recording 

sensor data up to 32 GByte. For further extension blueIOT comes with exposed PINs for I2C bus, analog and digital I/Os. OLEDs 

from Adafruit with I2C bus are supported right away. Further details and sample projects can be found on www.Fab-Lab.eu


moduleID: 74HC139N_fa229dffcda5c58d9e589070e2239d6d_1
family: 74xx
version: 4
fritzingversion: 0.12.34
author: Christoph Rieder
title: 74HC139N
label: 74HC139N
taxonomy: part.dip.16.pins
path: core/74HC139N_1.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">A Dual 2 to 4 DEMX / Decoder</p></body></html>


moduleID: SparkFun-Sensors-HMC6352-
family: sparkfun compass ic
version: 4
fritzingversion: 0.7.2b
author: www.fritzing.org
title: HMC6352
label: U
date: 2013-02-13
path: core/sparkfun-sensors-hmc6352-.fzp
description:
Compass module from Honeywell. Works very well. Schematic and footprint are production proven. Spark Fun Electronics SKU : COM-07892


moduleID: 4070_4_x_2_input_XOR_gate_multipart_subpart3
family: 40xx 4x2 input logic gate (multi-part)
version: 4
fritzingversion: 0.9.3b
author: Stephen G. Parry (modified by vanepp jan 2019)
title: 4070 4 x 2 Input XOR Gate, multi-part
label: 2
taxonomy: part.dip.14.pins
path:
C:/Users/niuyuling/AppData/Roaming/Fritzing/partfactory/6495e11ebfdd7c1c6d998375473de502/core/4070_4_x_2_input_XOR_gate_multipart_subpart3.fzp


