#!/bin/bash -e # build # Simple wiringPi build and install script # # Copyright (c) 2012-2015 Gordon Henderson ################################################################################# # This file is part of wiringPi: # A "wiring" library for the Raspberry Pi # # wiringPi is free software: you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # wiringPi is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU Lesser General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with wiringPi. If not, see . ################################################################################# # # wiringPi is designed to run on a Raspberry Pi only. # However if you're clever enough to actually look at this script to # see why it's not building for you, then good luck. # # To everyone else: Stop using cheap alternatives. Support the # Raspberry Pi Foundation as they're the only ones putting money # back into education! ################################################################################# check_make_ok() { if [ $? != 0 ]; then echo "" echo "Make Failed..." echo "Please check the messages and fix any problems. If you're still stuck," echo "then please email all the output and as many details as you can to" echo " projects@drogon.net" echo "" exit 1 fi } select_boards() { local cnt=0 local choice local call=${1} boards=("orangepir1" "orangepizero" "orangepizero-lts" "orangepipc" "orangepipch5" "orangepipcplus" "orangepiplus2e" "orangepione" "orangepioneh5" "orangepilite" "orangepiplus" "orangepizeroplus2h3" "orangepizeroplus" "orangepipc2" "orangepiprime" "orangepizeroplus2h5" "orangepiwin" "orangepiwinplus" "orangepi3" "orangepi3-lts" "orangepilite2" "orangepioneplus" "orangepi4" "orangepi4-lts" "orangepirk3399" "orangepi800" "orangepizero2" "orangepizero2-lts" "orangepizero2-b" "orangepizero3" "orangepir1plus-lts" "orangepir1plus" "blueberry") if [[ -f /etc/orangepi-release ]]; then source /etc/orangepi-release elif [[ -f /etc/armbian-release ]]; then source /etc/armbian-release [[ $BOARD == orangepi-r1 ]] && BOARD=orangepir1 [[ $BOARD == orangepi-rk3399 ]] && BOARD=orangepirk3399 [[ $BOARD == orangepizeroplus2-h3 ]] && BOARD=orangepizeroplus2h3 [[ $BOARD == orangepizeroplus2-h5 ]] && BOARD=orangepizeroplus2h5 else printf "All available boards:\n" for var in ${boards[@]} ; do printf "%4d. %s\n" $cnt ${boards[$cnt]} ((cnt+=1)) done while true ; do read -p "Choice: " choice if [ -z "${choice}" ] ; then continue fi if [ -z "${choice//[0-9]/}" ] ; then if [ $choice -ge 0 -a $choice -lt $cnt ] ; then export BOARD="${boards[$choice]}" break fi fi printf "Invalid input ...\n" done fi [[ $BOARD == orangepir1 ]] && BOARD=orangepir1-h2 [[ $BOARD == orangepizero ]] && BOARD=orangepizero-h2 [[ $BOARD == orangepizero-lts ]] && BOARD=orangepizero-h2 [[ $BOARD == orangepipc ]] && BOARD=orangepipc-h3 [[ $BOARD == orangepipch5 ]] && BOARD=orangepipc-h3 [[ $BOARD == orangepipcplus ]] && BOARD=orangepipcplus-h3 [[ $BOARD == orangepiplus2e ]] && BOARD=orangepiplus2e-h3 [[ $BOARD == orangepione ]] && BOARD=orangepione-h3 [[ $BOARD == orangepioneh5 ]] && BOARD=orangepione-h3 [[ $BOARD == orangepilite ]] && BOARD=orangepilite-h3 [[ $BOARD == orangepiplus ]] && BOARD=orangepiplus-h3 [[ $BOARD == orangepizeroplus ]] && BOARD=orangepizeroplus-h5 [[ $BOARD == orangepipc2 ]] && BOARD=orangepipc2-h5 [[ $BOARD == orangepiprime ]] && BOARD=orangepiprime-h5 [[ $BOARD == orangepiwin ]] && BOARD=orangepiwin-a64 [[ $BOARD == orangepiwinplus ]] && BOARD=orangepiwinplus-a64 [[ $BOARD == orangepi3 ]] && BOARD=orangepi3-h6 [[ $BOARD == orangepi3-lts ]] && BOARD=orangepi3-h6 [[ $BOARD == orangepilite2 ]] && BOARD=orangepilite2-h6 [[ $BOARD == orangepioneplus ]] && BOARD=orangepioneplus-h6 [[ $BOARD == orangepizero2 ]] && BOARD=orangepizero2-h616 [[ $BOARD == orangepizero2-lts ]] && BOARD=orangepizero2-h616 [[ $BOARD == orangepizero2-b ]] && BOARD=orangepizero2-h616 [[ $BOARD == orangepizero3 ]] && BOARD=orangepizero2-h616 [[ $BOARD == orangepir1plus ]] && BOARD=orangepir1plus-rk3328 [[ $BOARD == orangepir1plus-lts ]] && BOARD=orangepir1plus-rk3328 [[ $BOARD == blueberry ]] && BOARD=blueberry export BOARD="${BOARD}" } sudo=${WIRINGPI_SUDO-sudo} if [ x$1 = "xclean" ]; then cd wiringPi echo -n "wiringPi: " ; make V=1 clean cd ../devLib echo -n "DevLib: " ; make V=1 clean cd ../gpio echo -n "gpio: " ; make V=1 clean cd ../examples echo -n "Examples: " ; make V=1 clean cd Gertboard echo -n "Gertboard: " ; make V=1 clean cd ../PiFace echo -n "PiFace: " ; make V=1 clean cd ../q2w echo -n "Quick2Wire: " ; make V=1 clean cd ../PiGlow echo -n "PiGlow: " ; make V=1 clean cd ../scrollPhat echo -n "scrollPhat: " ; make V=1 clean cd ../.. echo -n "Deb: " ; rm -f debian-template/wiringpi*.deb echo exit fi if [ x$1 = "xuninstall" ]; then cd wiringPi echo -n "wiringPi: " ; $sudo make V=1 uninstall cd ../devLib echo -n "DevLib: " ; $sudo make V=1 uninstall cd ../gpio echo -n "gpio: " ; $sudo make V=1 uninstall exit fi # Only if you know what you're doing! if [ x$1 = "xdebian" ]; then here=`pwd` echo "removing old libs" cd debian-template/wiringPi rm -rf usr echo "building wiringPi" cd $here/wiringPi make V=1 install-deb echo "building devLib" cd $here/devLib make V=1 install-deb INCLUDE='-I. -I../wiringPi' echo "building gpio" cd $here/gpio make V=1 install-deb INCLUDE='-I../wiringPi -I../devLib' LDFLAGS=-L../debian-template/wiringPi/usr/lib echo "Building deb package" cd $here/debian-template fakeroot dpkg-deb --build wiringPi mv wiringPi.deb wiringpi-`cat $here/VERSION`-1.deb exit fi if [ x$1 != "x" ]; then echo "Usage: $0 [clean | uninstall]" exit 1 fi select_boards echo "wiringPi Build script" echo "=====================" echo hardware=`fgrep Hardware /proc/cpuinfo | head -1 | awk '{ print $3 }'` # if [ x$hardware != "xBCM2708" ]; then # echo "" # echo " +------------------------------------------------------------+" # echo " | wiringPi is designed to run on the Raspberry Pi only. |" # echo " | This processor does not appear to be a Raspberry Pi. |" # echo " +------------------------------------------------------------+" # echo " | In the unlikely event that you think it is a Raspberry Pi, |" # echo " | then please accept my apologies and email the contents of |" # echo " | /proc/cpuinfo to projects@drogon.net. |" # echo " | - Thanks, Gordon |" # echo " +------------------------------------------------------------+" # echo "" # exit 1 # fi echo echo "WiringPi Library" cd wiringPi $sudo make V=1 uninstall if [ x$1 = "xstatic" ]; then make V=1 -j5 static check_make_ok $sudo make V=1 install-static else make V=1 -j5 check_make_ok $sudo make V=1 install fi check_make_ok echo echo "WiringPi Devices Library" cd ../devLib $sudo make V=1 uninstall if [ x$1 = "xstatic" ]; then make V=1 -j5 static check_make_ok $sudo make V=1 install-static else make V=1 -j5 check_make_ok $sudo make V=1 install fi check_make_ok echo echo "GPIO Utility" cd ../gpio make V=1 -j5 check_make_ok $sudo make V=1 install check_make_ok # echo # echo "wiringPi Daemon" # cd ../wiringPiD # make V=1 -j5 # check_make_ok # $sudo make V=1 install # check_make_ok # echo # echo "Examples" # cd ../examples # make V=1 # cd .. echo echo All Done. echo "" echo "NOTE: To compile programs with wiringPi, you need to add:" echo " -lwiringPi" echo " to your compile line(s) To use the Gertboard, MaxDetect, etc." echo " code (the devLib), you need to also add:" echo " -lwiringPiDev" echo " to your compile line(s)." echo ""