wiringPi_Blueberry/examples/PiFace/reaction.c
2023-08-11 15:53:17 +08:00

195 lines
4.0 KiB
C

/*
* reaction.c:
* Simple test for the PiFace interface board.
*
* Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
***********************************************************************
* This file is part of wiringPi:
* https://projects.drogon.net/raspberry-pi/wiringpi/
*
* wiringPi is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* wiringPi is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with wiringPi. If not, see <http://www.gnu.org/licenses/>.
***********************************************************************
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <wiringPi.h>
#include <piFace.h>
int outputs [4] = { 0,0,0,0 } ;
#define PIFACE 200
/*
* light:
* Light up the given LED - actually lights up a pair
*********************************************************************************
*/
void light (int led, int value)
{
led *= 2 ;
digitalWrite (PIFACE + led + 0, value) ;
digitalWrite (PIFACE + led + 1, value) ;
}
/*
* lightAll:
* All On or Off
*********************************************************************************
*/
void lightAll (int onoff)
{
light (0, onoff) ;
light (1, onoff) ;
light (2, onoff) ;
light (3, onoff) ;
}
/*
* waitForNoButtons:
* Wait for all buttons to be released
*********************************************************************************
*/
void waitForNoButtons (void)
{
int i, button ;
for (;;)
{
button = 0 ;
for (i = 0 ; i < 4 ; ++i)
button += digitalRead (PIFACE + i) ;
if (button == 4)
break ;
}
}
void scanButton (int button)
{
if (digitalRead (PIFACE + button) == LOW)
{
outputs [button] ^= 1 ;
digitalWrite (PIFACE + button, outputs [button]) ;
}
while (digitalRead (PIFACE + button) == LOW)
delay (1) ;
}
int main (void)
{
int i, j ;
int led, button ;
unsigned int start, stop ;
printf ("Raspberry Pi PiFace Reaction Timer\n") ;
printf ("==================================\n") ;
if (piFaceSetup (PIFACE) == -1)
exit (1) ;
// Enable internal pull-ups
for (i = 0 ; i < 8 ; ++i)
pullUpDnControl (PIFACE + i, PUD_UP) ;
// Main game loop:
// Put some random LED pairs up for a few seconds, then blank ...
for (;;)
{
printf ("Press any button to start ... \n") ; fflush (stdout) ;
for (;;)
{
led = rand () % 4 ;
light (led, 1) ;
delay (10) ;
light (led, 0) ;
button = 0 ;
for (j = 0 ; j < 4 ; ++j)
button += digitalRead (PIFACE + j) ;
if (button != 4)
break ;
}
waitForNoButtons () ;
printf ("Wait for it ... ") ; fflush (stdout) ;
led = rand () % 4 ;
delay (rand () % 500 + 1000) ;
light (led, 1) ;
start = millis () ;
for (button = -1 ; button == -1 ; )
{
for (j = 0 ; j < 4 ; ++j)
if (digitalRead (PIFACE + j) == 0) // Pushed
{
button = j ;
break ;
}
}
stop = millis () ;
button = 3 - button ; // Correct for the buttons/LEDs reversed
light (led, 0) ;
waitForNoButtons () ;
light (led, 1) ;
if (button == led)
{
printf ("You got it in %3d mS\n", stop - start) ;
}
else
{
printf ("Missed: You pushed %d - LED was %d\n", button, led) ;
for (;;)
{
light (button, 1) ;
delay (100) ;
light (button, 0) ;
delay (100) ;
i = 0 ;
for (j = 0 ; j < 4 ; ++j)
i += digitalRead (PIFACE + j) ;
if (i != 4)
break ;
}
waitForNoButtons () ;
}
light (led, 0) ;
delay (4000) ;
}
return 0 ;
}