113 lines
3.2 KiB
C
113 lines
3.2 KiB
C
/*
|
|
* piFace.:
|
|
* This file to interface with the PiFace peripheral device which
|
|
* has an MCP23S17 GPIO device connected via the SPI bus.
|
|
*
|
|
* Copyright (c) 2012-2013 Gordon Henderson
|
|
***********************************************************************
|
|
* This file is part of wiringPi:
|
|
* https://projects.drogon.net/raspberry-pi/wiringpi/
|
|
*
|
|
* wiringPi is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as
|
|
* published by the Free Software Foundation, either version 3 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* wiringPi is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with wiringPi.
|
|
* If not, see <http://www.gnu.org/licenses/>.
|
|
***********************************************************************
|
|
*/
|
|
|
|
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
|
|
#include <wiringPi.h>
|
|
#include <mcp23s17.h>
|
|
|
|
#include "piFace.h"
|
|
|
|
|
|
/*
|
|
* myDigitalWrite:
|
|
* Perform the digitalWrite function on the PiFace board
|
|
*********************************************************************************
|
|
*/
|
|
|
|
void myDigitalWrite (struct wiringPiNodeStruct *node, int pin, int value)
|
|
{
|
|
digitalWrite (pin + 16, value) ;
|
|
}
|
|
|
|
|
|
/*
|
|
* myDigitalRead:
|
|
* Perform the digitalRead function on the PiFace board
|
|
* With a slight twist - if we read from base + 8, then we
|
|
* read from the output latch...
|
|
*********************************************************************************
|
|
*/
|
|
|
|
int myDigitalRead (struct wiringPiNodeStruct *node, int pin)
|
|
{
|
|
if ((pin - node->pinBase) >= 8)
|
|
return digitalRead (pin + 8) ;
|
|
else
|
|
return digitalRead (pin + 16 + 8) ;
|
|
}
|
|
|
|
|
|
/*
|
|
* myPullUpDnControl:
|
|
* Perform the pullUpDnControl function on the PiFace board
|
|
*********************************************************************************
|
|
*/
|
|
|
|
void myPullUpDnControl (struct wiringPiNodeStruct *node, int pin, int pud)
|
|
{
|
|
pullUpDnControl (pin + 16 + 8, pud) ;
|
|
}
|
|
|
|
|
|
/*
|
|
* piFaceSetup
|
|
* We're going to create an instance of the mcp23s17 here, then
|
|
* provide our own read/write routines on-top of it...
|
|
* The supplied PiFace code (in Pithon) treats it as an 8-bit device
|
|
* where you write the output ports and read the input port using the
|
|
* same pin numbers, however I have had a request to be able to read
|
|
* the output port, so reading 8..15 will read the output latch.
|
|
*********************************************************************************
|
|
*/
|
|
|
|
int piFaceSetup (const int pinBase)
|
|
{
|
|
int i ;
|
|
struct wiringPiNodeStruct *node ;
|
|
|
|
// Create an mcp23s17 instance:
|
|
|
|
mcp23s17Setup (pinBase + 16, 0, 0) ;
|
|
|
|
// Set the direction bits
|
|
|
|
for (i = 0 ; i < 8 ; ++i)
|
|
{
|
|
pinMode (pinBase + 16 + i, OUTPUT) ; // Port A is the outputs
|
|
pinMode (pinBase + 16 + 8 + i, INPUT) ; // Port B inputs.
|
|
}
|
|
|
|
node = wiringPiNewNode (pinBase, 16) ;
|
|
node->digitalRead = myDigitalRead ;
|
|
node->digitalWrite = myDigitalWrite ;
|
|
node->pullUpDnControl = myPullUpDnControl ;
|
|
|
|
return 0 ;
|
|
}
|