Danger-alarm/SOFTWARE/Source/ZC13.cpp

173 lines
4.9 KiB
C++
Raw Normal View History

2024-06-03 16:27:41 +08:00
#include "ZC13.hpp"
#include "common.h"
int ZC13_INIT()
{
uint tx_offset = pio_add_program(ZC13_PIO, &uart_tx_program);
uart_tx_program_init(ZC13_PIO, ZC13_PIO_SM_TX, tx_offset, ZC13_PIO_TX_PIN, ZC13_PIO_SERIAL_BAUD);
uint rx_offset = pio_add_program(ZC13_PIO, &uart_rx_program);
uart_rx_program_init(ZC13_PIO, ZC13_PIO_SM_RX, rx_offset, ZC13_PIO_RX_PIN, ZC13_PIO_SERIAL_BAUD);
return 0;
}
2024-06-04 09:54:09 +08:00
int ZC13_PIO_UART_TX_DATA(PIO pio, uint sm, uint8_t * DATA, int DATA_LEN)
{
for (int i = 0; i < DATA_LEN; i++) {
2024-06-03 16:27:41 +08:00
uart_tx_program_putc(pio, sm, DATA[i]);
sleep_ms(3);
}
2024-06-04 09:54:09 +08:00
return 0;
2024-06-03 16:27:41 +08:00
}
2024-06-04 09:54:09 +08:00
int ZC13_PIO_UART_RX_DATA(PIO pio, uint sm, uint8_t * DATA, int DATA_LEN)
{
2024-06-03 16:27:41 +08:00
char c = '\0';
int received_count = 0;
2024-06-04 09:54:09 +08:00
int timeout_ms = 100; // 设置较长的超时时间
2024-06-03 16:27:41 +08:00
while (received_count < DATA_LEN && timeout_ms > 0) {
if (uart_rx_program_available(pio, sm)) {
c = uart_rx_program_getc(pio, sm);
DATA[received_count++] = c;
2024-06-04 09:54:09 +08:00
printf("0x%X ", c);
2024-06-03 16:27:41 +08:00
if (c == '\n') {
// 接收到换行符,停止接收数据
break;
}
} else {
// 没有接收到数据,继续等待
sleep_ms(1);
timeout_ms--;
}
}
if (received_count == 0) {
// 没有接收到有效数据,可以进行相应的处理
return -1;
}
return received_count;
}
int ZC13(const char *model)
{
uint8_t CH4_DATA[270] = { 0 };
int CH4_DATA_LEN = 0;
// 发送指令
uint8_t CH4_CMD[9] = { 0xFF, 0x01, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79 };
2024-06-04 09:54:09 +08:00
ZC13_PIO_UART_TX_DATA(ZC13_PIO, ZC13_PIO_SM_TX, CH4_CMD, sizeof(CH4_CMD));
2024-06-03 16:27:41 +08:00
sleep_ms(200);
2024-06-04 09:54:09 +08:00
// 接收指令
CH4_DATA_LEN = ZC13_PIO_UART_RX_DATA(ZC13_PIO, ZC13_PIO_SM_RX, CH4_DATA, 9);
2024-06-03 16:27:41 +08:00
printf("\n");
2024-06-04 09:54:09 +08:00
printf("%d\n", CH4_DATA_LEN);
2024-06-03 16:27:41 +08:00
uint8_t highByte = CH4_DATA[2]; // 假设这是气体浓度高位字节
uint8_t lowByte = CH4_DATA[3]; // 假设这是气体浓度高位字节
// 判断最高位是否为 1
if (highByte & 0x80) {
// 最高位是 1表示传感器故障
printf("CH4 sensor malfunction!\n");
} else {
if (CH4_DATA[1] == 0X86) {
2024-06-04 09:54:09 +08:00
if (0 == strcasecmp(model, "ZC05")) {
// 计算气体浓度值
uint16_t gasConcentration = (highByte & 0x3F) * 256 + lowByte;
// 输出气体浓度值
printf("CH4 Concentration: %uppm\n", gasConcentration);
return gasConcentration;
}
if (0 == strcasecmp(model, "ZC13")) {
// 计算气体浓度值
uint16_t gasConcentration = (highByte & 0x1F) * 256 + lowByte;
// 输出气体浓度值
printf("CH4 Concentration: %uppm\n", gasConcentration);
return gasConcentration;
}
2024-06-03 16:27:41 +08:00
}
}
2024-06-04 09:54:09 +08:00
2024-06-03 16:27:41 +08:00
return -1;
}
/*
int ZC13(const char *model)
{
char CH4_DATA[9] = { 0 };
int CH4_DATA_index = 0;
// 发送指令
char CH4_CMD[9] = { 0xFF, 0x01, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79 };
for (int i = 0; i < 9; i++) {
uart_tx_program_putc(ZC13_PIO, ZC13_PIO_SM_TX, CH4_CMD[i]);
sleep_ms(1);
}
sleep_ms(200);
// 接收数据,直到收到换行符或达到缓冲区大小限制
char c = '\0';
int timeout_ms = 100; // 设置超时时间为100ms
int received_count = 0;
while (received_count < 9 && timeout_ms > 0) {
if (uart_rx_program_available(ZC13_PIO, ZC13_PIO_SM_RX)) {
c = uart_rx_program_getc(ZC13_PIO, ZC13_PIO_SM_RX);
CH4_DATA[CH4_DATA_index++] = c;
received_count++;
timeout_ms = 100; // 重置超时时间
} else {
sleep_ms(1);
timeout_ms--; // 减少超时时间
}
}
// 处理接收到的数据
for (int i = 0; i < 9; i++) {
printf("0x%X ", CH4_DATA[i]);
}
printf("\n");
uint8_t highByte = CH4_DATA[2]; // 假设这是气体浓度高位字节
uint8_t lowByte = CH4_DATA[3]; // 假设这是气体浓度高位字节
// 判断最高位是否为 1
if (highByte & 0x80) {
// 最高位是 1表示传感器故障
printf("CH4 sensor malfunction!\n");
} else {
if (CH4_DATA[1] == 0X86) {
if ( 0 == strcasecmp(model, "ZC05")) {
// 计算气体浓度值
uint16_t gasConcentration = (highByte & 0x3F) * 256 + lowByte;
// 输出气体浓度值
printf("CH4 Concentration: %uppm\n", gasConcentration);
return gasConcentration;
}
if ( 0 == strcasecmp(model, "ZC13")) {
// 计算气体浓度值
uint16_t gasConcentration = (highByte & 0x1F) * 256 + lowByte;
// 输出气体浓度值
printf("CH4 Concentration: %uppm\n", gasConcentration);
return gasConcentration;
}
}
}
return -1;
}
2024-06-04 09:54:09 +08:00
*/