build/patch/kernel/archive/rockchip64-6.1/add-board-nanopi-r2s.patch

915 lines
22 KiB
Diff

From f051544daa4dd8039b30f9a10ee509a65ba26147 Mon Sep 17 00:00:00 2001
From: Paolo Sabatino <paolo.sabatino@gmail.com>
Date: Sat, 7 Jan 2023 11:59:47 +0000
Subject: [PATCH] rockchip64: consolidate nanopi r2s device trees
---
.../dts/rockchip/rk3328-nanopi-r2-rev00.dts | 126 +++++
.../dts/rockchip/rk3328-nanopi-r2-rev20.dts | 39 ++
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 493 ++++++++++++------
3 files changed, 490 insertions(+), 168 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2-rev00.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2-rev20.dts
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2-rev00.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2-rev00.dts
new file mode 100644
index 00000000000..8ba95189c03
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2-rev00.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3328-nanopi-r2s.dts"
+
+/ {
+ model = "FriendlyElec NanoPi R2S";
+ compatible = "friendlyelec,nanopi-r2", "rockchip,rk3328";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key1>;
+
+ button@0 {
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "reset";
+ linux,code = <BTN_1>;
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
+ };
+ };
+
+ vcc_rtl8153: vcc-rtl8153-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_en_drv>;
+ regulator-always-on;
+ regulator-name = "vcc_rtl8153";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ off-on-delay-us = <5000>;
+ enable-active-high;
+ };
+};
+
+&mach {
+ hwrev = <0>;
+ model = "NanoPi R2S";
+};
+
+&emmc {
+ status = "disabled";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&leds {
+ status = "okay";
+
+ led@2 {
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ label = "lan_led";
+ };
+
+ led@3 {
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+ label = "wan_led";
+ };
+};
+
+&rk805 {
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PD0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&vccio_sd {
+ status = "okay";
+};
+
+&io_domains {
+ vccio3-supply = <&vccio_sd>;
+};
+
+&sdmmc {
+ vqmmc-supply = <&vccio_sd>;
+ max-frequency = <150000000>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc_ext {
+ status = "disabled";
+};
+
+&sdio_pwrseq {
+ status = "disabled";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ rockchip-key {
+ gpio_key1: gpio-key1 {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb30_en_drv: usb30-en-drv {
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2-rev20.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2-rev20.dts
new file mode 100644
index 00000000000..ad327ca5685
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2-rev20.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ */
+
+/dts-v1/;
+#include "rk3328-nanopi-r2s.dts"
+
+/ {
+ model = "FriendlyElec NanoPi R2";
+ compatible = "friendlyelec,nanopi-r2", "rockchip,rk3328";
+};
+
+&mach {
+ hwrev = <0x20>;
+ model = "NanoPi R2";
+};
+
+&gmac2io {
+ pinctrl-0 = <&rgmiim1_pins>, <&phy_intb>, <&phy_rstb>;
+};
+
+&rtl8211e {
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PD0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pinctrl {
+ phy {
+ phy_intb: phy-intb {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ phy_rstb: phy-rstb {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 1445b879ac7..7fff7ef89d9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -1,118 +1,166 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
*/
/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "rk3328-dram-default-timing.dtsi"
#include "rk3328.dtsi"
/ {
- model = "FriendlyElec NanoPi R2S";
- compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+ model = "FriendlyElec boards based on Rockchip RK3328";
+ compatible = "friendlyelec,nanopi-r2",
+ "rockchip,rk3328";
aliases {
- ethernet1 = &rtl8153;
- mmc0 = &sdmmc;
+ ethernet1 = &r8153;
};
chosen {
+ bootargs = "swiotlb=1 coherent_pool=1m consoleblank=0";
stdout-path = "serial2:1500000n8";
};
- gmac_clk: gmac-clock {
+ gmac_clkin: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac_clkin";
#clock-cells = <0>;
};
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&reset_button_pin>;
- pinctrl-names = "default";
-
- key-reset {
- label = "reset";
- gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <50>;
- };
+ mach: board {
+ compatible = "friendlyelec,board";
+ machine = "NANOPI-R2";
+ hwrev = <255>;
+ model = "NanoPi R2 Series";
+ nvmem-cells = <&efuse_id>, <&efuse_cpu_version>;
+ nvmem-cell-names = "id", "cpu-version";
};
- leds {
+ leds: gpio-leds {
compatible = "gpio-leds";
- pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
pinctrl-names = "default";
+ pinctrl-0 =<&leds_gpio>;
+ status = "disabled";
- lan_led: led-0 {
- gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
- label = "nanopi-r2s:green:lan";
- };
-
- sys_led: led-1 {
+ led@1 {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
- label = "nanopi-r2s:red:sys";
- default-state = "on";
- };
-
- wan_led: led-2 {
- gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
- label = "nanopi-r2s:green:wan";
+ label = "status_led";
+ linux,default-trigger = "heartbeat";
+ linux,default-trigger-delay-ms = <0>;
};
};
- vcc_io_sdio: sdmmcio-regulator {
- compatible = "regulator-gpio";
- enable-active-high;
- gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&sdio_vcc_pin>;
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk805 1>;
+ clock-names = "ext_clock";
pinctrl-names = "default";
- regulator-name = "vcc_io_sdio";
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-settling-time-us = <5000>;
- regulator-type = "voltage";
- startup-delay-us = <2000>;
- states = <1800000 0x1>,
- <3300000 0x0>;
- vin-supply = <&vcc_io_33>;
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+ };
+
+ sdmmc_ext: dwmmc@ff5f0000 {
+ compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff5f0000 0x0 0x4000>;
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT>,
+ <&cru SCLK_SDMMC_EXT_DRV>, <&cru SCLK_SDMMC_EXT_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&sdmmc0m1_pin>;
+ gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- regulator-name = "vcc_sd";
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-boot-on;
+ regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_io_33>;
+ vin-supply = <&vcc_io>;
};
- vdd_5v: vdd-5v {
+ vccio_sd: sdmmcio-regulator {
+ compatible = "regulator-gpio";
+ gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ regulator-name = "vccio_sd";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_io>;
+ startup-delay-us = <2000>;
+ regulator-settling-time-us = <5000>;
+ enable-active-high;
+ status = "disabled";
+ };
+
+ vcc_sys: vcc-sys {
compatible = "regulator-fixed";
- regulator-name = "vdd_5v";
+ regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
- vdd_5v_lan: vdd-5v-lan {
+ vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&lan_vdd_pin>;
- pinctrl-names = "default";
- regulator-name = "vdd_5v_lan";
+ regulator-name = "vcc_phy";
regulator-always-on;
regulator-boot-on;
- vin-supply = <&vdd_5v>;
+ };
+
+ vcc_host_vbus: host-vbus-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_host_vbus";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /delete-node/ dmc-opp-table;
+
+ dmc_opp_table: dmc_opp_table {
+ compatible = "operating-points-v2";
+
+ opp-786000000 {
+ opp-hz = /bits/ 64 <786000000>;
+ opp-microvolt = <1075000 1075000 1200000>;
+ };
+ opp-798000000 {
+ opp-hz = /bits/ 64 <798000000>;
+ opp-microvolt = <1075000 1075000 1200000>;
+ };
+ opp-840000000 {
+ opp-hz = /bits/ 64 <840000000>;
+ opp-microvolt = <1075000 1075000 1200000>;
+ };
+ opp-924000000 {
+ opp-hz = /bits/ 64 <924000000>;
+ opp-microvolt = <1100000 1100000 1200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <1175000 1175000 1200000>;
+ };
};
};
@@ -120,34 +168,57 @@ &cpu0 {
cpu-supply = <&vdd_arm>;
};
-&cpu1 {
- cpu-supply = <&vdd_arm>;
+&dfi {
+ status = "okay";
};
-&cpu2 {
- cpu-supply = <&vdd_arm>;
+&dmc {
+ center-supply = <&vdd_logic>;
+ ddr_timing = <&ddr_timing>;
+ status = "okay";
};
-&cpu3 {
- cpu-supply = <&vdd_arm>;
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <150000000>;
+ mmc-hs200-1_8v;
+ no-sd;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_emmc>;
+ status = "okay";
};
-&display_subsystem {
+&gmac2phy {
+ phy-supply = <&vcc_phy>;
+ clock_in_out = "output";
+ assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
+ assigned-clock-rate = <50000000>;
+ assigned-clocks = <&cru SCLK_MAC2PHY>;
+ assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
status = "disabled";
};
&gmac2io {
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
- assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
clock_in_out = "input";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
phy-handle = <&rtl8211e>;
phy-mode = "rgmii";
- phy-supply = <&vcc_io_33>;
- pinctrl-0 = <&rgmiim1_pins>;
- pinctrl-names = "default";
- rx_delay = <0x18>;
+ phy-supply = <&vcc_phy>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
snps,aal;
+ snps,rxpbl = <0x4>;
+ snps,txpbl = <0x4>;
tx_delay = <0x24>;
+ rx_delay = <0x18>;
status = "okay";
mdio {
@@ -155,13 +226,11 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
- rtl8211e: ethernet-phy@1 {
- reg = <1>;
- pinctrl-0 = <&eth_phy_reset_pin>;
- pinctrl-names = "default";
+ rtl8211e: phy@0 {
+ reg = <0>;
reset-assert-us = <10000>;
- reset-deassert-us = <50000>;
- reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ reset-deassert-us = <30000>;
+ /* reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; */
};
};
};
@@ -169,36 +238,35 @@ rtl8211e: ethernet-phy@1 {
&i2c1 {
status = "okay";
- rk805: pmic@18 {
+ rk805: rk805@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
- interrupt-parent = <&gpio1>;
- interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk805-clkout2";
gpio-controller;
#gpio-cells = <2>;
- pinctrl-0 = <&pmic_int_l>;
pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
- vcc1-supply = <&vdd_5v>;
- vcc2-supply = <&vdd_5v>;
- vcc3-supply = <&vdd_5v>;
- vcc4-supply = <&vdd_5v>;
- vcc5-supply = <&vcc_io_33>;
- vcc6-supply = <&vdd_5v>;
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_io>;
regulators {
- vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-init-microvolt = <1075000>;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1450000>;
- regulator-ramp-delay = <12500>;
-
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
@@ -207,12 +275,11 @@ regulator-state-mem {
vdd_arm: DCDC_REG2 {
regulator-name = "vdd_arm";
- regulator-always-on;
- regulator-boot-on;
+ regulator-init-microvolt = <1225000>;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1450000>;
- regulator-ramp-delay = <12500>;
-
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <950000>;
@@ -223,19 +290,17 @@ vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
-
regulator-state-mem {
regulator-on-in-suspend;
};
};
- vcc_io_33: DCDC_REG4 {
- regulator-name = "vcc_io_33";
- regulator-always-on;
- regulator-boot-on;
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
-
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
@@ -244,11 +309,10 @@ regulator-state-mem {
vcc_18: LDO_REG1 {
regulator-name = "vcc_18";
- regulator-always-on;
- regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
-
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
@@ -257,11 +321,10 @@ regulator-state-mem {
vcc18_emmc: LDO_REG2 {
regulator-name = "vcc18_emmc";
- regulator-always-on;
- regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
-
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
@@ -270,11 +333,10 @@ regulator-state-mem {
vdd_10: LDO_REG3 {
regulator-name = "vdd_10";
- regulator-always-on;
- regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
-
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
@@ -285,84 +347,183 @@ regulator-state-mem {
};
&io_domains {
- pmuio-supply = <&vcc_io_33>;
- vccio1-supply = <&vcc_io_33>;
- vccio2-supply = <&vcc18_emmc>;
- vccio3-supply = <&vcc_io_sdio>;
- vccio4-supply = <&vcc_18>;
- vccio5-supply = <&vcc_io_33>;
- vccio6-supply = <&vcc_io_33>;
status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_io>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_18>;
+ pmuio-supply = <&vcc_io>;
};
&pinctrl {
- button {
- reset_button_pin: reset-button-pin {
- rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
- gmac2io {
- eth_phy_reset_pin: eth-phy-reset-pin {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
- leds {
- lan_led_pin: lan-led-pin {
- rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ sdmmc0 {
+ sdmmc0_clk: sdmmc0-clk {
+ rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_4ma>;
};
- sys_led_pin: sys-led-pin {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ sdmmc0_cmd: sdmmc0-cmd {
+ rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_4ma>;
};
- wan_led_pin: wan-led-pin {
- rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ sdmmc0_dectn: sdmmc0-dectn {
+ rockchip,pins = <1 RK_PA5 1 &pcfg_pull_up_4ma>;
+ };
+
+ sdmmc0_bus4: sdmmc0-bus4 {
+ rockchip,pins =
+ <1 RK_PA0 1 &pcfg_pull_up_4ma>,
+ <1 RK_PA1 1 &pcfg_pull_up_4ma>,
+ <1 RK_PA2 1 &pcfg_pull_up_4ma>,
+ <1 RK_PA3 1 &pcfg_pull_up_4ma>;
};
};
- lan {
- lan_vdd_pin: lan-vdd-pin {
- rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ sdmmc0ext {
+ sdmmc0ext_clk: sdmmc0ext-clk {
+ rockchip,pins = <3 RK_PA2 3 &pcfg_pull_none_2ma>;
+ };
+
+ sdmmc0ext_cmd: sdmmc0ext-cmd {
+ rockchip,pins = <3 RK_PA0 3 &pcfg_pull_up_2ma>;
+ };
+
+ sdmmc0ext_bus4: sdmmc0ext-bus4 {
+ rockchip,pins =
+ <3 RK_PA4 3 &pcfg_pull_up_2ma>,
+ <3 RK_PA5 3 &pcfg_pull_up_2ma>,
+ <3 RK_PA6 3 &pcfg_pull_up_2ma>,
+ <3 RK_PA7 3 &pcfg_pull_up_2ma>;
};
};
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+ gmac-1 {
+ rgmiim1_pins: rgmiim1-pins {
+ rockchip,pins =
+ /* mac_txclk */
+ <1 RK_PB4 2 &pcfg_pull_none_4ma>,
+ /* mac_rxclk */
+ <1 RK_PB5 2 &pcfg_pull_none>,
+ /* mac_mdio */
+ <1 RK_PC3 2 &pcfg_pull_none_2ma>,
+ /* mac_txen */
+ <1 RK_PD1 2 &pcfg_pull_none_4ma>,
+ /* mac_clk */
+ <1 RK_PC5 2 &pcfg_pull_none_2ma>,
+ /* mac_rxdv */
+ <1 RK_PC6 2 &pcfg_pull_none>,
+ /* mac_mdc */
+ <1 RK_PC7 2 &pcfg_pull_none_2ma>,
+ /* mac_rxd1 */
+ <1 RK_PB2 2 &pcfg_pull_none>,
+ /* mac_rxd0 */
+ <1 RK_PB3 2 &pcfg_pull_none>,
+ /* mac_txd1 */
+ <1 RK_PB0 2 &pcfg_pull_none_4ma>,
+ /* mac_txd0 */
+ <1 RK_PB1 2 &pcfg_pull_none_4ma>,
+ /* mac_rxd3 */
+ <1 RK_PB6 2 &pcfg_pull_none>,
+ /* mac_rxd2 */
+ <1 RK_PB7 2 &pcfg_pull_none>,
+ /* mac_txd3 */
+ <1 RK_PC0 2 &pcfg_pull_none_4ma>,
+ /* mac_txd2 */
+ <1 RK_PC1 2 &pcfg_pull_none_4ma>,
+
+ /* mac_txclk */
+ <0 RK_PB0 1 &pcfg_pull_none>,
+ /* mac_txen */
+ <0 RK_PB4 1 &pcfg_pull_none>,
+ /* mac_clk */
+ <0 RK_PD0 1 &pcfg_pull_none>,
+ /* mac_txd1 */
+ <0 RK_PC0 1 &pcfg_pull_none>,
+ /* mac_txd0 */
+ <0 RK_PC1 1 &pcfg_pull_none>,
+ /* mac_txd3 */
+ <0 RK_PC7 1 &pcfg_pull_none>,
+ /* mac_txd2 */
+ <0 RK_PC6 1 &pcfg_pull_none>;
};
};
- sd {
- sdio_vcc_pin: sdio-vcc-pin {
- rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ gpio-leds {
+ leds_gpio: leds-gpio {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
-&pwm2 {
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ vmmc-supply = <&vcc_sd>;
status = "okay";
};
-&sdmmc {
+&sdmmc_ext {
bus-width = <4>;
cap-sd-highspeed;
+ cap-sdio-irq;
disable-wp;
- pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+ keep-power-in-suspend;
+ max-frequency = <100000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
pinctrl-names = "default";
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
+ pinctrl-0 = <&sdmmc0ext_clk &sdmmc0ext_cmd &sdmmc0ext_bus4>;
+ rockchip,default-sample-phase = <120>;
+ supports-sdio;
sd-uhs-sdr104;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vcc_io_sdio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PD2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
};
&tsadc {
- rockchip,hw-tshut-mode = <0>;
- rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
status = "okay";
};
@@ -378,13 +539,16 @@ &u2phy_otg {
status = "okay";
};
-&uart2 {
+&usb20_otg {
status = "okay";
};
-&usb20_otg {
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
status = "okay";
- dr_mode = "host";
};
&usbdrd3 {
@@ -393,17 +557,10 @@ &usbdrd3 {
#address-cells = <1>;
#size-cells = <0>;
- /* Second port is for USB 3.0 */
- rtl8153: device@2 {
+ r8153: device@2 {
compatible = "usbbda,8153";
reg = <2>;
+ realtek,led-data = <0x87>;
+ local-mac-address = [00 00 00 00 00 00];
};
};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
--
2.34.1